|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH v2] x86/alt: Clean up the assembly used to generate alternatives
* On the C side, switch to using local lables rather than hardcoded numbers.
* Rename parameters and lables to be consistent with alt_instr names, and
consistent between the the C and asm versions.
* On the asm side, factor some expressions out into macros to aid clarity.
* Consistently declare section attributes.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
---
CC: Jan Beulich <JBeulich@xxxxxxxx>
CC: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
CC: Roger Pau Monné <roger.pau@xxxxxxxxxx>
CC: Wei Liu <wei.liu2@xxxxxxxxxx>
v2:
* repl_{s,e} => alt_repl_{s,e}
* Use .LXEN%= prefix for the C lables
---
xen/include/asm-x86/alternative-asm.h | 57 ++++++++++++++++--------------
xen/include/asm-x86/alternative.h | 65 +++++++++++++++++++----------------
2 files changed, 67 insertions(+), 55 deletions(-)
diff --git a/xen/include/asm-x86/alternative-asm.h
b/xen/include/asm-x86/alternative-asm.h
index 6640e85..150bd1a 100644
--- a/xen/include/asm-x86/alternative-asm.h
+++ b/xen/include/asm-x86/alternative-asm.h
@@ -9,60 +9,67 @@
* enough information for the alternatives patching code to patch an
* instruction. See apply_alternatives().
*/
-.macro altinstruction_entry orig alt feature orig_len alt_len
+.macro altinstruction_entry orig repl feature orig_len repl_len
.long \orig - .
- .long \alt - .
+ .long \repl - .
.word \feature
.byte \orig_len
- .byte \alt_len
+ .byte \repl_len
.endm
+#define orig_len (.L\@_orig_e - .L\@_orig_s)
+#define repl_len(nr) (.L\@_repl_e\()nr - .L\@_repl_s\()nr)
+#define decl_repl(insn, nr) .L\@_repl_s\()nr: insn; .L\@_repl_e\()nr:
+
.macro ALTERNATIVE oldinstr, newinstr, feature
-.Lold_start_\@:
+.L\@_orig_s:
\oldinstr
-.Lold_end_\@:
+.L\@_orig_e:
.pushsection .altinstructions, "a", @progbits
- altinstruction_entry .Lold_start_\@, .Lnew_start_\@, \feature, \
- (.Lold_end_\@ - .Lold_start_\@), (.Lnew_end_\@ - .Lnew_start_\@)
+ altinstruction_entry .L\@_orig_s, .L\@_repl_s1, \feature, \
+ orig_len, repl_len(1)
.section .discard, "a", @progbits
/* Assembler-time check that \newinstr isn't longer than \oldinstr. */
- .byte 0xff + (.Lnew_end_\@ - .Lnew_start_\@) - (.Lold_end_\@ -
.Lold_start_\@)
+ .byte 0xff + repl_len(1) - orig_len
.section .altinstr_replacement, "ax", @progbits
-.Lnew_start_\@:
- \newinstr
-.Lnew_end_\@:
+
+ decl_repl(\newinstr, 1)
+
.popsection
.endm
.macro ALTERNATIVE_2 oldinstr, newinstr1, feature1, newinstr2, feature2
-.Lold_start_\@:
+.L\@_orig_s:
\oldinstr
-.Lold_end_\@:
+.L\@_orig_e:
.pushsection .altinstructions, "a", @progbits
- altinstruction_entry .Lold_start_\@, .Lnew1_start_\@, \feature1, \
- (.Lold_end_\@ - .Lold_start_\@), (.Lnew1_end_\@ - .Lnew1_start_\@)
- altinstruction_entry .Lold_start_\@, .Lnew2_start_\@, \feature2, \
- (.Lold_end_\@ - .Lold_start_\@), (.Lnew2_end_\@ - .Lnew2_start_\@)
+
+ altinstruction_entry .L\@_orig_s, .L\@_repl_s1, \feature1, \
+ orig_len, repl_len(1)
+ altinstruction_entry .L\@_orig_s, .L\@_repl_s2, \feature2, \
+ orig_len, repl_len(2)
.section .discard, "a", @progbits
/* Assembler-time check that \newinstr{1,2} aren't longer than \oldinstr.
*/
- .byte 0xff + (.Lnew1_end_\@ - .Lnew1_start_\@) - (.Lold_end_\@ -
.Lold_start_\@)
- .byte 0xff + (.Lnew2_end_\@ - .Lnew2_start_\@) - (.Lold_end_\@ -
.Lold_start_\@)
+ .byte 0xff + repl_len(1) - orig_len
+ .byte 0xff + repl_len(2) - orig_len
.section .altinstr_replacement, "ax", @progbits
-.Lnew1_start_\@:
- \newinstr1
-.Lnew1_end_\@:
-.Lnew2_start_\@:
- \newinstr2
-.Lnew2_end_\@:
+
+ decl_repl(\newinstr1, 1)
+ decl_repl(\newinstr2, 2)
+
.popsection
.endm
+#undef decl_repl
+#undef repl_len
+#undef orig_len
+
#endif /* __ASSEMBLY__ */
#endif /* _ASM_X86_ALTERNATIVE_ASM_H_ */
diff --git a/xen/include/asm-x86/alternative.h
b/xen/include/asm-x86/alternative.h
index d9706fd..bcad3ee 100644
--- a/xen/include/asm-x86/alternative.h
+++ b/xen/include/asm-x86/alternative.h
@@ -26,44 +26,49 @@ extern void apply_alternatives(const struct alt_instr
*start,
const struct alt_instr *end);
extern void alternative_instructions(void);
-#define OLDINSTR(oldinstr) "661:\n\t" oldinstr "\n662:\n"
+#define OLDINSTR(oldinstr) ".LXEN%=_orig_s:\n\t" oldinstr "\n.LXEN%=_orig_e:\n"
-#define b_replacement(number) "663"#number
-#define e_replacement(number) "664"#number
+#define alt_orig_len "(.LXEN%=_orig_e - .LXEN%=_orig_s)"
+#define alt_repl_s(num) ".LXEN%=_repl_s"#num
+#define alt_repl_e(num) ".LXEN%=_repl_e"#num
+#define alt_repl_len(num) "(" alt_repl_e(num) " - " alt_repl_s(num) ")"
-#define alt_slen "662b-661b"
-#define alt_rlen(number) e_replacement(number)"f-"b_replacement(number)"f"
+#define ALTINSTR_ENTRY(feature, num) \
+ " .long .LXEN%=_orig_s - .\n" /* label */ \
+ " .long " alt_repl_s(num)" - .\n" /* new instruction */ \
+ " .word " __stringify(feature) "\n" /* feature bit */ \
+ " .byte " alt_orig_len "\n" /* source len */ \
+ " .byte " alt_repl_len(num) "\n" /* replacement len */
-#define ALTINSTR_ENTRY(feature, number) \
- " .long 661b - .\n" /* label */ \
- " .long " b_replacement(number)"f - .\n" /* new instruction */ \
- " .word " __stringify(feature) "\n" /* feature bit */ \
- " .byte " alt_slen "\n" /* source len */ \
- " .byte " alt_rlen(number) "\n" /* replacement len */
+#define DISCARD_ENTRY(num) /* repl <= orig */ \
+ " .byte 0xff + (" alt_repl_len(num) ") - (" alt_orig_len ")\n"
-#define DISCARD_ENTRY(number) /* rlen <= slen */ \
- " .byte 0xff + (" alt_rlen(number) ") - (" alt_slen ")\n"
-
-#define ALTINSTR_REPLACEMENT(newinstr, feature, number) /* replacement */ \
- b_replacement(number)":\n\t" newinstr "\n" e_replacement(number)
":\n\t"
-
-#define ALTERNATIVE_N(newinstr, feature, number) \
- ".pushsection .altinstructions,\"a\"\n" \
- ALTINSTR_ENTRY(feature, number) \
- ".section .discard,\"a\",@progbits\n" \
- DISCARD_ENTRY(number) \
- ".section .altinstr_replacement, \"ax\"\n" \
- ALTINSTR_REPLACEMENT(newinstr, feature, number) \
- ".popsection\n"
+#define ALTINSTR_REPLACEMENT(newinstr, num) /* replacement */ \
+ alt_repl_s(num)":\n\t" newinstr "\n" alt_repl_e(num) ":\n\t"
/* alternative assembly primitive: */
-#define ALTERNATIVE(oldinstr, newinstr, feature) \
- OLDINSTR(oldinstr) \
- ALTERNATIVE_N(newinstr, feature, 1)
+#define ALTERNATIVE(oldinstr, newinstr, feature) \
+ OLDINSTR(oldinstr) \
+ ".pushsection .altinstructions, \"a\", @progbits\n" \
+ ALTINSTR_ENTRY(feature, 1) \
+ ".section .discard, \"a\", @progbits\n" \
+ DISCARD_ENTRY(1) \
+ ".section .altinstr_replacement, \"ax\", @progbits\n" \
+ ALTINSTR_REPLACEMENT(newinstr, 1) \
+ ".popsection\n"
#define ALTERNATIVE_2(oldinstr, newinstr1, feature1, newinstr2, feature2) \
- ALTERNATIVE(oldinstr, newinstr1, feature1) \
- ALTERNATIVE_N(newinstr2, feature2, 2)
+ OLDINSTR(oldinstr) \
+ ".pushsection .altinstructions, \"a\", @progbits\n" \
+ ALTINSTR_ENTRY(feature1, 1) \
+ ALTINSTR_ENTRY(feature2, 2) \
+ ".section .discard, \"a\", @progbits\n" \
+ DISCARD_ENTRY(1) \
+ DISCARD_ENTRY(2) \
+ ".section .altinstr_replacement, \"ax\", @progbits\n" \
+ ALTINSTR_REPLACEMENT(newinstr1, 1) \
+ ALTINSTR_REPLACEMENT(newinstr2, 2) \
+ ".popsection\n"
/*
* Alternative instructions for different CPU types or capabilities.
--
2.1.4
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |