Xen project Mailing List

From: Markus Armbruster <armbru@xxxxxxxxxx> The previous commit improved compile time by including less of the generated QAPI headers. This is impossible for stuff defined directly in qapi-schema.json, because that ends up in headers that that pull in everything. Move everything but include directives from qapi-schema.json to new sub-module qapi/misc.json, then include just the "misc" shard where possible. It's possible everywhere, except: * monitor.c needs qmp-command.h to get qmp_init_marshal() * monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need qapi-event.h to get enum QAPIEvent Perhaps we'll get rid of those some other day. Adding a type to qapi/migration.json now recompiles some 120 instead of 2300 out of 5100 objects. Signed-off-by: Markus Armbruster <armbru@xxxxxxxxxx> Message-Id: <20180211093607.27351-25-armbru@xxxxxxxxxx> [eblake: rebase to master] Signed-off-by: Eric Blake <eblake@xxxxxxxxxx> --- Makefile | 9 + Makefile.objs | 4 + qapi-schema.json | 3200 +---------------------------------- qapi/misc.json | 3201 ++++++++++++++++++++++++++++++++++++ include/hw/qdev-properties.h | 3 +- include/monitor/monitor.h | 2 +- include/sysemu/arch_init.h | 2 +- include/sysemu/balloon.h | 2 +- include/sysemu/dump.h | 2 +- include/sysemu/hostmem.h | 2 +- include/sysemu/replay.h | 3 +- vl.c | 4 +- arch_init.c | 2 +- balloon.c | 2 +- block/iscsi.c | 2 +- cpus.c | 2 +- dump.c | 4 +- hmp.c | 10 +- hw/acpi/core.c | 2 +- hw/acpi/cpu.c | 2 +- hw/acpi/memory_hotplug.c | 2 +- hw/acpi/vmgenid.c | 2 +- hw/core/qdev.c | 2 +- hw/i386/xen/xen-hvm.c | 2 +- hw/ipmi/ipmi.c | 2 +- hw/pci/pci-stub.c | 2 +- hw/pci/pci.c | 2 +- hw/ppc/spapr_rtc.c | 2 +- hw/s390x/s390-skeys.c | 2 +- hw/timer/mc146818rtc.c | 4 +- hw/virtio/virtio-balloon.c | 2 +- hw/watchdog/watchdog.c | 2 +- iothread.c | 2 +- migration/savevm.c | 3 +- numa.c | 4 +- qdev-monitor.c | 2 +- qmp.c | 4 +- stubs/uuid.c | 2 +- stubs/vmgenid.c | 2 +- stubs/xen-hvm.c | 2 +- target/arm/monitor.c | 3 +- target/i386/cpu.c | 4 +- target/s390x/cpu.c | 3 +- target/s390x/sigp.c | 2 +- tests/qmp-test.c | 3 +- tests/test-qobject-input-visitor.c | 2 +- tests/test-visitor-serialization.c | 1 - ui/gtk.c | 2 +- util/qemu-config.c | 2 +- .gitignore | 4 + 50 files changed, 3285 insertions(+), 3248 deletions(-) create mode 100644 qapi/misc.json diff --git a/Makefile b/Makefile index b12fcd5d8ff..26ed98e0300 100644 --- a/Makefile +++ b/Makefile @@ -99,6 +99,7 @@ GENERATED_FILES += qapi/qapi-types-common.h qapi/qapi-types-common.c GENERATED_FILES += qapi/qapi-types-crypto.h qapi/qapi-types-crypto.c GENERATED_FILES += qapi/qapi-types-introspect.h qapi/qapi-types-introspect.c GENERATED_FILES += qapi/qapi-types-migration.h qapi/qapi-types-migration.c +GENERATED_FILES += qapi/qapi-types-misc.h qapi/qapi-types-misc.c GENERATED_FILES += qapi/qapi-types-net.h qapi/qapi-types-net.c GENERATED_FILES += qapi/qapi-types-rocker.h qapi/qapi-types-rocker.c GENERATED_FILES += qapi/qapi-types-run-state.h qapi/qapi-types-run-state.c @@ -116,6 +117,7 @@ GENERATED_FILES += qapi/qapi-visit-common.h qapi/qapi-visit-common.c GENERATED_FILES += qapi/qapi-visit-crypto.h qapi/qapi-visit-crypto.c GENERATED_FILES += qapi/qapi-visit-introspect.h qapi/qapi-visit-introspect.c GENERATED_FILES += qapi/qapi-visit-migration.h qapi/qapi-visit-migration.c +GENERATED_FILES += qapi/qapi-visit-misc.h qapi/qapi-visit-misc.c GENERATED_FILES += qapi/qapi-visit-net.h qapi/qapi-visit-net.c GENERATED_FILES += qapi/qapi-visit-rocker.h qapi/qapi-visit-rocker.c GENERATED_FILES += qapi/qapi-visit-run-state.h qapi/qapi-visit-run-state.c @@ -132,6 +134,7 @@ GENERATED_FILES += qapi/qapi-commands-common.h qapi/qapi-commands-common.c GENERATED_FILES += qapi/qapi-commands-crypto.h qapi/qapi-commands-crypto.c GENERATED_FILES += qapi/qapi-commands-introspect.h qapi/qapi-commands-introspect.c GENERATED_FILES += qapi/qapi-commands-migration.h qapi/qapi-commands-migration.c +GENERATED_FILES += qapi/qapi-commands-misc.h qapi/qapi-commands-misc.c GENERATED_FILES += qapi/qapi-commands-net.h qapi/qapi-commands-net.c GENERATED_FILES += qapi/qapi-commands-rocker.h qapi/qapi-commands-rocker.c GENERATED_FILES += qapi/qapi-commands-run-state.h qapi/qapi-commands-run-state.c @@ -148,6 +151,7 @@ GENERATED_FILES += qapi/qapi-events-common.h qapi/qapi-events-common.c GENERATED_FILES += qapi/qapi-events-crypto.h qapi/qapi-events-crypto.c GENERATED_FILES += qapi/qapi-events-introspect.h qapi/qapi-events-introspect.c GENERATED_FILES += qapi/qapi-events-migration.h qapi/qapi-events-migration.c +GENERATED_FILES += qapi/qapi-events-misc.h qapi/qapi-events-misc.c GENERATED_FILES += qapi/qapi-events-net.h qapi/qapi-events-net.c GENERATED_FILES += qapi/qapi-events-rocker.h qapi/qapi-events-rocker.c GENERATED_FILES += qapi/qapi-events-run-state.h qapi/qapi-events-run-state.c @@ -573,6 +577,7 @@ qapi-modules = $(SRC_PATH)/qapi-schema.json $(SRC_PATH)/qapi/common.json \ $(SRC_PATH)/qapi/crypto.json \ $(SRC_PATH)/qapi/introspect.json \ $(SRC_PATH)/qapi/migration.json \ + $(SRC_PATH)/qapi/misc.json \ $(SRC_PATH)/qapi/net.json \ $(SRC_PATH)/qapi/rocker.json \ $(SRC_PATH)/qapi/run-state.json \ @@ -591,6 +596,7 @@ qapi/qapi-types-common.c qapi/qapi-types-common.h \ qapi/qapi-types-crypto.c qapi/qapi-types-crypto.h \ qapi/qapi-types-introspect.c qapi/qapi-types-introspect.h \ qapi/qapi-types-migration.c qapi/qapi-types-migration.h \ +qapi/qapi-types-misc.c qapi/qapi-types-misc.h \ qapi/qapi-types-net.c qapi/qapi-types-net.h \ qapi/qapi-types-rocker.c qapi/qapi-types-rocker.h \ qapi/qapi-types-run-state.c qapi/qapi-types-run-state.h \ @@ -608,6 +614,7 @@ qapi/qapi-visit-common.c qapi/qapi-visit-common.h \ qapi/qapi-visit-crypto.c qapi/qapi-visit-crypto.h \ qapi/qapi-visit-introspect.c qapi/qapi-visit-introspect.h \ qapi/qapi-visit-migration.c qapi/qapi-visit-migration.h \ +qapi/qapi-visit-misc.c qapi/qapi-visit-misc.h \ qapi/qapi-visit-net.c qapi/qapi-visit-net.h \ qapi/qapi-visit-rocker.c qapi/qapi-visit-rocker.h \ qapi/qapi-visit-run-state.c qapi/qapi-visit-run-state.h \ @@ -624,6 +631,7 @@ qapi/qapi-commands-common.c qapi/qapi-commands-common.h \ qapi/qapi-commands-crypto.c qapi/qapi-commands-crypto.h \ qapi/qapi-commands-introspect.c qapi/qapi-commands-introspect.h \ qapi/qapi-commands-migration.c qapi/qapi-commands-migration.h \ +qapi/qapi-commands-misc.c qapi/qapi-commands-misc.h \ qapi/qapi-commands-net.c qapi/qapi-commands-net.h \ qapi/qapi-commands-rocker.c qapi/qapi-commands-rocker.h \ qapi/qapi-commands-run-state.c qapi/qapi-commands-run-state.h \ @@ -640,6 +648,7 @@ qapi/qapi-events-common.c qapi/qapi-events-common.h \ qapi/qapi-events-crypto.c qapi/qapi-events-crypto.h \ qapi/qapi-events-introspect.c qapi/qapi-events-introspect.h \ qapi/qapi-events-migration.c qapi/qapi-events-migration.h \ +qapi/qapi-events-misc.c qapi/qapi-events-misc.h \ qapi/qapi-events-net.c qapi/qapi-events-net.h \ qapi/qapi-events-rocker.c qapi/qapi-events-rocker.h \ qapi/qapi-events-run-state.c qapi/qapi-events-run-state.h \ diff --git a/Makefile.objs b/Makefile.objs index 5dc7a13c726..149627b5890 100644 --- a/Makefile.objs +++ b/Makefile.objs @@ -11,6 +11,7 @@ util-obj-y += qapi/qapi-types-common.o util-obj-y += qapi/qapi-types-crypto.o util-obj-y += qapi/qapi-types-introspect.o util-obj-y += qapi/qapi-types-migration.o +util-obj-y += qapi/qapi-types-misc.o util-obj-y += qapi/qapi-types-net.o util-obj-y += qapi/qapi-types-rocker.o util-obj-y += qapi/qapi-types-run-state.o @@ -28,6 +29,7 @@ util-obj-y += qapi/qapi-visit-common.o util-obj-y += qapi/qapi-visit-crypto.o util-obj-y += qapi/qapi-visit-introspect.o util-obj-y += qapi/qapi-visit-migration.o +util-obj-y += qapi/qapi-visit-misc.o util-obj-y += qapi/qapi-visit-net.o util-obj-y += qapi/qapi-visit-rocker.o util-obj-y += qapi/qapi-visit-run-state.o @@ -44,6 +46,7 @@ util-obj-y += qapi/qapi-events-common.o util-obj-y += qapi/qapi-events-crypto.o util-obj-y += qapi/qapi-events-introspect.o util-obj-y += qapi/qapi-events-migration.o +util-obj-y += qapi/qapi-events-misc.o util-obj-y += qapi/qapi-events-net.o util-obj-y += qapi/qapi-events-rocker.o util-obj-y += qapi/qapi-events-run-state.o @@ -136,6 +139,7 @@ common-obj-y += qapi/qapi-commands-common.o common-obj-y += qapi/qapi-commands-crypto.o common-obj-y += qapi/qapi-commands-introspect.o common-obj-y += qapi/qapi-commands-migration.o +common-obj-y += qapi/qapi-commands-misc.o common-obj-y += qapi/qapi-commands-net.o common-obj-y += qapi/qapi-commands-rocker.o common-obj-y += qapi/qapi-commands-run-state.o diff --git a/qapi-schema.json b/qapi-schema.json index 3c1abf27005..689d06c5304 100644 --- a/qapi-schema.json +++ b/qapi-schema.json @@ -92,3202 +92,4 @@ { 'include': 'qapi/transaction.json' } { 'include': 'qapi/trace.json' } { 'include': 'qapi/introspect.json' } - -## -# = Miscellanea -## - -## -# @qmp_capabilities: -# -# Enable QMP capabilities. -# -# Arguments: None. -# -# Example: -# -# -> { "execute": "qmp_capabilities" } -# <- { "return": {} } -# -# Notes: This command is valid exactly when first connecting: it must be -# issued before any other command will be accepted, and will fail once the -# monitor is accepting other commands. (see qemu docs/interop/qmp-spec.txt) -# -# Since: 0.13 -# -## -{ 'command': 'qmp_capabilities' } - -## -# @VersionTriple: -# -# A three-part version number. -# -# @major: The major version number. -# -# @minor: The minor version number. -# -# @micro: The micro version number. -# -# Since: 2.4 -## -{ 'struct': 'VersionTriple', - 'data': {'major': 'int', 'minor': 'int', 'micro': 'int'} } - - -## -# @VersionInfo: -# -# A description of QEMU's version. -# -# @qemu: The version of QEMU. By current convention, a micro -# version of 50 signifies a development branch. A micro version -# greater than or equal to 90 signifies a release candidate for -# the next minor version. A micro version of less than 50 -# signifies a stable release. -# -# @package: QEMU will always set this field to an empty string. Downstream -# versions of QEMU should set this to a non-empty string. The -# exact format depends on the downstream however it highly -# recommended that a unique name is used. -# -# Since: 0.14.0 -## -{ 'struct': 'VersionInfo', - 'data': {'qemu': 'VersionTriple', 'package': 'str'} } - -## -# @query-version: -# -# Returns the current version of QEMU. -# -# Returns: A @VersionInfo object describing the current version of QEMU. -# -# Since: 0.14.0 -# -# Example: -# -# -> { "execute": "query-version" } -# <- { -# "return":{ -# "qemu":{ -# "major":0, -# "minor":11, -# "micro":5 -# }, -# "package":"" -# } -# } -# -## -{ 'command': 'query-version', 'returns': 'VersionInfo' } - -## -# @CommandInfo: -# -# Information about a QMP command -# -# @name: The command name -# -# Since: 0.14.0 -## -{ 'struct': 'CommandInfo', 'data': {'name': 'str'} } - -## -# @query-commands: -# -# Return a list of supported QMP commands by this server -# -# Returns: A list of @CommandInfo for all supported commands -# -# Since: 0.14.0 -# -# Example: -# -# -> { "execute": "query-commands" } -# <- { -# "return":[ -# { -# "name":"query-balloon" -# }, -# { -# "name":"system_powerdown" -# } -# ] -# } -# -# Note: This example has been shortened as the real response is too long. -# -## -{ 'command': 'query-commands', 'returns': ['CommandInfo'] } - -## -# @LostTickPolicy: -# -# Policy for handling lost ticks in timer devices. -# -# @discard: throw away the missed tick(s) and continue with future injection -# normally. Guest time may be delayed, unless the OS has explicit -# handling of lost ticks -# -# @delay: continue to deliver ticks at the normal rate. Guest time will be -# delayed due to the late tick -# -# @merge: merge the missed tick(s) into one tick and inject. Guest time -# may be delayed, depending on how the OS reacts to the merging -# of ticks -# -# @slew: deliver ticks at a higher rate to catch up with the missed tick. The -# guest time should not be delayed once catchup is complete. -# -# Since: 2.0 -## -{ 'enum': 'LostTickPolicy', - 'data': ['discard', 'delay', 'merge', 'slew' ] } - -## -# @add_client: -# -# Allow client connections for VNC, Spice and socket based -# character devices to be passed in to QEMU via SCM_RIGHTS. -# -# @protocol: protocol name. Valid names are "vnc", "spice" or the -# name of a character device (eg. from -chardev id=XXXX) -# -# @fdname: file descriptor name previously passed via 'getfd' command -# -# @skipauth: whether to skip authentication. Only applies -# to "vnc" and "spice" protocols -# -# @tls: whether to perform TLS. Only applies to the "spice" -# protocol -# -# Returns: nothing on success. -# -# Since: 0.14.0 -# -# Example: -# -# -> { "execute": "add_client", "arguments": { "protocol": "vnc", -# "fdname": "myclient" } } -# <- { "return": {} } -# -## -{ 'command': 'add_client', - 'data': { 'protocol': 'str', 'fdname': 'str', '*skipauth': 'bool', - '*tls': 'bool' } } - -## -# @NameInfo: -# -# Guest name information. -# -# @name: The name of the guest -# -# Since: 0.14.0 -## -{ 'struct': 'NameInfo', 'data': {'*name': 'str'} } - -## -# @query-name: -# -# Return the name information of a guest. -# -# Returns: @NameInfo of the guest -# -# Since: 0.14.0 -# -# Example: -# -# -> { "execute": "query-name" } -# <- { "return": { "name": "qemu-name" } } -# -## -{ 'command': 'query-name', 'returns': 'NameInfo' } - -## -# @KvmInfo: -# -# Information about support for KVM acceleration -# -# @enabled: true if KVM acceleration is active -# -# @present: true if KVM acceleration is built into this executable -# -# Since: 0.14.0 -## -{ 'struct': 'KvmInfo', 'data': {'enabled': 'bool', 'present': 'bool'} } - -## -# @query-kvm: -# -# Returns information about KVM acceleration -# -# Returns: @KvmInfo -# -# Since: 0.14.0 -# -# Example: -# -# -> { "execute": "query-kvm" } -# <- { "return": { "enabled": true, "present": true } } -# -## -{ 'command': 'query-kvm', 'returns': 'KvmInfo' } - -## -# @UuidInfo: -# -# Guest UUID information (Universally Unique Identifier). -# -# @UUID: the UUID of the guest -# -# Since: 0.14.0 -# -# Notes: If no UUID was specified for the guest, a null UUID is returned. -## -{ 'struct': 'UuidInfo', 'data': {'UUID': 'str'} } - -## -# @query-uuid: -# -# Query the guest UUID information. -# -# Returns: The @UuidInfo for the guest -# -# Since: 0.14.0 -# -# Example: -# -# -> { "execute": "query-uuid" } -# <- { "return": { "UUID": "550e8400-e29b-41d4-a716-446655440000" } } -# -## -{ 'command': 'query-uuid', 'returns': 'UuidInfo' } - -## -# @EventInfo: -# -# Information about a QMP event -# -# @name: The event name -# -# Since: 1.2.0 -## -{ 'struct': 'EventInfo', 'data': {'name': 'str'} } - -## -# @query-events: -# -# Return a list of supported QMP events by this server -# -# Returns: A list of @EventInfo for all supported events -# -# Since: 1.2.0 -# -# Example: -# -# -> { "execute": "query-events" } -# <- { -# "return": [ -# { -# "name":"SHUTDOWN" -# }, -# { -# "name":"RESET" -# } -# ] -# } -# -# Note: This example has been shortened as the real response is too long. -# -## -{ 'command': 'query-events', 'returns': ['EventInfo'] } - -## -# @CpuInfoArch: -# -# An enumeration of cpu types that enable additional information during -# @query-cpus and @query-cpus-fast. -# -# @s390: since 2.12 -# -# Since: 2.6 -## -{ 'enum': 'CpuInfoArch', - 'data': ['x86', 'sparc', 'ppc', 'mips', 'tricore', 's390', 'other' ] } - -## -# @CpuInfo: -# -# Information about a virtual CPU -# -# @CPU: the index of the virtual CPU -# -# @current: this only exists for backwards compatibility and should be ignored -# -# @halted: true if the virtual CPU is in the halt state. Halt usually refers -# to a processor specific low power mode. -# -# @qom_path: path to the CPU object in the QOM tree (since 2.4) -# -# @thread_id: ID of the underlying host thread -# -# @props: properties describing to which node/socket/core/thread -# virtual CPU belongs to, provided if supported by board (since 2.10) -# -# @arch: architecture of the cpu, which determines which additional fields -# will be listed (since 2.6) -# -# Since: 0.14.0 -# -# Notes: @halted is a transient state that changes frequently. By the time the -# data is sent to the client, the guest may no longer be halted. -## -{ 'union': 'CpuInfo', - 'base': {'CPU': 'int', 'current': 'bool', 'halted': 'bool', - 'qom_path': 'str', 'thread_id': 'int', - '*props': 'CpuInstanceProperties', 'arch': 'CpuInfoArch' }, - 'discriminator': 'arch', - 'data': { 'x86': 'CpuInfoX86', - 'sparc': 'CpuInfoSPARC', - 'ppc': 'CpuInfoPPC', - 'mips': 'CpuInfoMIPS', - 'tricore': 'CpuInfoTricore', - 's390': 'CpuInfoS390', - 'other': 'CpuInfoOther' } } - -## -# @CpuInfoX86: -# -# Additional information about a virtual i386 or x86_64 CPU -# -# @pc: the 64-bit instruction pointer -# -# Since: 2.6 -## -{ 'struct': 'CpuInfoX86', 'data': { 'pc': 'int' } } - -## -# @CpuInfoSPARC: -# -# Additional information about a virtual SPARC CPU -# -# @pc: the PC component of the instruction pointer -# -# @npc: the NPC component of the instruction pointer -# -# Since: 2.6 -## -{ 'struct': 'CpuInfoSPARC', 'data': { 'pc': 'int', 'npc': 'int' } } - -## -# @CpuInfoPPC: -# -# Additional information about a virtual PPC CPU -# -# @nip: the instruction pointer -# -# Since: 2.6 -## -{ 'struct': 'CpuInfoPPC', 'data': { 'nip': 'int' } } - -## -# @CpuInfoMIPS: -# -# Additional information about a virtual MIPS CPU -# -# @PC: the instruction pointer -# -# Since: 2.6 -## -{ 'struct': 'CpuInfoMIPS', 'data': { 'PC': 'int' } } - -## -# @CpuInfoTricore: -# -# Additional information about a virtual Tricore CPU -# -# @PC: the instruction pointer -# -# Since: 2.6 -## -{ 'struct': 'CpuInfoTricore', 'data': { 'PC': 'int' } } - -## -# @CpuInfoOther: -# -# No additional information is available about the virtual CPU -# -# Since: 2.6 -# -## -{ 'struct': 'CpuInfoOther', 'data': { } } - -## -# @CpuS390State: -# -# An enumeration of cpu states that can be assumed by a virtual -# S390 CPU -# -# Since: 2.12 -## -{ 'enum': 'CpuS390State', - 'prefix': 'S390_CPU_STATE', - 'data': [ 'uninitialized', 'stopped', 'check-stop', 'operating', 'load' ] } - -## -# @CpuInfoS390: -# -# Additional information about a virtual S390 CPU -# -# @cpu-state: the virtual CPU's state -# -# Since: 2.12 -## -{ 'struct': 'CpuInfoS390', 'data': { 'cpu-state': 'CpuS390State' } } - -## -# @query-cpus: -# -# Returns a list of information about each virtual CPU. -# -# This command causes vCPU threads to exit to userspace, which causes -# a small interruption to guest CPU execution. This will have a negative -# impact on realtime guests and other latency sensitive guest workloads. -# It is recommended to use @query-cpus-fast instead of this command to -# avoid the vCPU interruption. -# -# Returns: a list of @CpuInfo for each virtual CPU -# -# Since: 0.14.0 -# -# Example: -# -# -> { "execute": "query-cpus" } -# <- { "return": [ -# { -# "CPU":0, -# "current":true, -# "halted":false, -# "qom_path":"/machine/unattached/device[0]", -# "arch":"x86", -# "pc":3227107138, -# "thread_id":3134 -# }, -# { -# "CPU":1, -# "current":false, -# "halted":true, -# "qom_path":"/machine/unattached/device[2]", -# "arch":"x86", -# "pc":7108165, -# "thread_id":3135 -# } -# ] -# } -# -# Notes: This interface is deprecated (since 2.12.0), and it is strongly -# recommended that you avoid using it. Use @query-cpus-fast to -# obtain information about virtual CPUs. -# -## -{ 'command': 'query-cpus', 'returns': ['CpuInfo'] } - -## -# @CpuInfoFast: -# -# Information about a virtual CPU -# -# @cpu-index: index of the virtual CPU -# -# @qom-path: path to the CPU object in the QOM tree -# -# @thread-id: ID of the underlying host thread -# -# @props: properties describing to which node/socket/core/thread -# virtual CPU belongs to, provided if supported by board -# -# @arch: architecture of the cpu, which determines which additional fields -# will be listed -# -# Since: 2.12 -# -## -{ 'union': 'CpuInfoFast', - 'base': {'cpu-index': 'int', 'qom-path': 'str', - 'thread-id': 'int', '*props': 'CpuInstanceProperties', - 'arch': 'CpuInfoArch' }, - 'discriminator': 'arch', - 'data': { 'x86': 'CpuInfoOther', - 'sparc': 'CpuInfoOther', - 'ppc': 'CpuInfoOther', - 'mips': 'CpuInfoOther', - 'tricore': 'CpuInfoOther', - 's390': 'CpuInfoS390', - 'other': 'CpuInfoOther' } } - -## -# @query-cpus-fast: -# -# Returns information about all virtual CPUs. This command does not -# incur a performance penalty and should be used in production -# instead of query-cpus. -# -# Returns: list of @CpuInfoFast -# -# Since: 2.12 -# -# Example: -# -# -> { "execute": "query-cpus-fast" } -# <- { "return": [ -# { -# "thread-id": 25627, -# "props": { -# "core-id": 0, -# "thread-id": 0, -# "socket-id": 0 -# }, -# "qom-path": "/machine/unattached/device[0]", -# "arch":"x86", -# "cpu-index": 0 -# }, -# { -# "thread-id": 25628, -# "props": { -# "core-id": 0, -# "thread-id": 0, -# "socket-id": 1 -# }, -# "qom-path": "/machine/unattached/device[2]", -# "arch":"x86", -# "cpu-index": 1 -# } -# ] -# } -## -{ 'command': 'query-cpus-fast', 'returns': [ 'CpuInfoFast' ] } - -## -# @IOThreadInfo: -# -# Information about an iothread -# -# @id: the identifier of the iothread -# -# @thread-id: ID of the underlying host thread -# -# @poll-max-ns: maximum polling time in ns, 0 means polling is disabled -# (since 2.9) -# -# @poll-grow: how many ns will be added to polling time, 0 means that it's not -# configured (since 2.9) -# -# @poll-shrink: how many ns will be removed from polling time, 0 means that -# it's not configured (since 2.9) -# -# Since: 2.0 -## -{ 'struct': 'IOThreadInfo', - 'data': {'id': 'str', - 'thread-id': 'int', - 'poll-max-ns': 'int', - 'poll-grow': 'int', - 'poll-shrink': 'int' } } - -## -# @query-iothreads: -# -# Returns a list of information about each iothread. -# -# Note: this list excludes the QEMU main loop thread, which is not declared -# using the -object iothread command-line option. It is always the main thread -# of the process. -# -# Returns: a list of @IOThreadInfo for each iothread -# -# Since: 2.0 -# -# Example: -# -# -> { "execute": "query-iothreads" } -# <- { "return": [ -# { -# "id":"iothread0", -# "thread-id":3134 -# }, -# { -# "id":"iothread1", -# "thread-id":3135 -# } -# ] -# } -# -## -{ 'command': 'query-iothreads', 'returns': ['IOThreadInfo'] } - -## -# @BalloonInfo: -# -# Information about the guest balloon device. -# -# @actual: the number of bytes the balloon currently contains -# -# Since: 0.14.0 -# -## -{ 'struct': 'BalloonInfo', 'data': {'actual': 'int' } } - -## -# @query-balloon: -# -# Return information about the balloon device. -# -# Returns: @BalloonInfo on success -# -# If the balloon driver is enabled but not functional because the KVM -# kernel module cannot support it, KvmMissingCap -# -# If no balloon device is present, DeviceNotActive -# -# Since: 0.14.0 -# -# Example: -# -# -> { "execute": "query-balloon" } -# <- { "return": { -# "actual": 1073741824, -# } -# } -# -## -{ 'command': 'query-balloon', 'returns': 'BalloonInfo' } - -## -# @BALLOON_CHANGE: -# -# Emitted when the guest changes the actual BALLOON level. This value is -# equivalent to the @actual field return by the 'query-balloon' command -# -# @actual: actual level of the guest memory balloon in bytes -# -# Note: this event is rate-limited. -# -# Since: 1.2 -# -# Example: -# -# <- { "event": "BALLOON_CHANGE", -# "data": { "actual": 944766976 }, -# "timestamp": { "seconds": 1267020223, "microseconds": 435656 } } -# -## -{ 'event': 'BALLOON_CHANGE', - 'data': { 'actual': 'int' } } - -## -# @PciMemoryRange: -# -# A PCI device memory region -# -# @base: the starting address (guest physical) -# -# @limit: the ending address (guest physical) -# -# Since: 0.14.0 -## -{ 'struct': 'PciMemoryRange', 'data': {'base': 'int', 'limit': 'int'} } - -## -# @PciMemoryRegion: -# -# Information about a PCI device I/O region. -# -# @bar: the index of the Base Address Register for this region -# -# @type: 'io' if the region is a PIO region -# 'memory' if the region is a MMIO region -# -# @size: memory size -# -# @prefetch: if @type is 'memory', true if the memory is prefetchable -# -# @mem_type_64: if @type is 'memory', true if the BAR is 64-bit -# -# Since: 0.14.0 -## -{ 'struct': 'PciMemoryRegion', - 'data': {'bar': 'int', 'type': 'str', 'address': 'int', 'size': 'int', - '*prefetch': 'bool', '*mem_type_64': 'bool' } } - -## -# @PciBusInfo: -# -# Information about a bus of a PCI Bridge device -# -# @number: primary bus interface number. This should be the number of the -# bus the device resides on. -# -# @secondary: secondary bus interface number. This is the number of the -# main bus for the bridge -# -# @subordinate: This is the highest number bus that resides below the -# bridge. -# -# @io_range: The PIO range for all devices on this bridge -# -# @memory_range: The MMIO range for all devices on this bridge -# -# @prefetchable_range: The range of prefetchable MMIO for all devices on -# this bridge -# -# Since: 2.4 -## -{ 'struct': 'PciBusInfo', - 'data': {'number': 'int', 'secondary': 'int', 'subordinate': 'int', - 'io_range': 'PciMemoryRange', - 'memory_range': 'PciMemoryRange', - 'prefetchable_range': 'PciMemoryRange' } } - -## -# @PciBridgeInfo: -# -# Information about a PCI Bridge device -# -# @bus: information about the bus the device resides on -# -# @devices: a list of @PciDeviceInfo for each device on this bridge -# -# Since: 0.14.0 -## -{ 'struct': 'PciBridgeInfo', - 'data': {'bus': 'PciBusInfo', '*devices': ['PciDeviceInfo']} } - -## -# @PciDeviceClass: -# -# Information about the Class of a PCI device -# -# @desc: a string description of the device's class -# -# @class: the class code of the device -# -# Since: 2.4 -## -{ 'struct': 'PciDeviceClass', - 'data': {'*desc': 'str', 'class': 'int'} } - -## -# @PciDeviceId: -# -# Information about the Id of a PCI device -# -# @device: the PCI device id -# -# @vendor: the PCI vendor id -# -# Since: 2.4 -## -{ 'struct': 'PciDeviceId', - 'data': {'device': 'int', 'vendor': 'int'} } - -## -# @PciDeviceInfo: -# -# Information about a PCI device -# -# @bus: the bus number of the device -# -# @slot: the slot the device is located in -# -# @function: the function of the slot used by the device -# -# @class_info: the class of the device -# -# @id: the PCI device id -# -# @irq: if an IRQ is assigned to the device, the IRQ number -# -# @qdev_id: the device name of the PCI device -# -# @pci_bridge: if the device is a PCI bridge, the bridge information -# -# @regions: a list of the PCI I/O regions associated with the device -# -# Notes: the contents of @class_info.desc are not stable and should only be -# treated as informational. -# -# Since: 0.14.0 -## -{ 'struct': 'PciDeviceInfo', - 'data': {'bus': 'int', 'slot': 'int', 'function': 'int', - 'class_info': 'PciDeviceClass', 'id': 'PciDeviceId', - '*irq': 'int', 'qdev_id': 'str', '*pci_bridge': 'PciBridgeInfo', - 'regions': ['PciMemoryRegion']} } - -## -# @PciInfo: -# -# Information about a PCI bus -# -# @bus: the bus index -# -# @devices: a list of devices on this bus -# -# Since: 0.14.0 -## -{ 'struct': 'PciInfo', 'data': {'bus': 'int', 'devices': ['PciDeviceInfo']} } - -## -# @query-pci: -# -# Return information about the PCI bus topology of the guest. -# -# Returns: a list of @PciInfo for each PCI bus. Each bus is -# represented by a json-object, which has a key with a json-array of -# all PCI devices attached to it. Each device is represented by a -# json-object. -# -# Since: 0.14.0 -# -# Example: -# -# -> { "execute": "query-pci" } -# <- { "return": [ -# { -# "bus": 0, -# "devices": [ -# { -# "bus": 0, -# "qdev_id": "", -# "slot": 0, -# "class_info": { -# "class": 1536, -# "desc": "Host bridge" -# }, -# "id": { -# "device": 32902, -# "vendor": 4663 -# }, -# "function": 0, -# "regions": [ -# ] -# }, -# { -# "bus": 0, -# "qdev_id": "", -# "slot": 1, -# "class_info": { -# "class": 1537, -# "desc": "ISA bridge" -# }, -# "id": { -# "device": 32902, -# "vendor": 28672 -# }, -# "function": 0, -# "regions": [ -# ] -# }, -# { -# "bus": 0, -# "qdev_id": "", -# "slot": 1, -# "class_info": { -# "class": 257, -# "desc": "IDE controller" -# }, -# "id": { -# "device": 32902, -# "vendor": 28688 -# }, -# "function": 1, -# "regions": [ -# { -# "bar": 4, -# "size": 16, -# "address": 49152, -# "type": "io" -# } -# ] -# }, -# { -# "bus": 0, -# "qdev_id": "", -# "slot": 2, -# "class_info": { -# "class": 768, -# "desc": "VGA controller" -# }, -# "id": { -# "device": 4115, -# "vendor": 184 -# }, -# "function": 0, -# "regions": [ -# { -# "prefetch": true, -# "mem_type_64": false, -# "bar": 0, -# "size": 33554432, -# "address": 4026531840, -# "type": "memory" -# }, -# { -# "prefetch": false, -# "mem_type_64": false, -# "bar": 1, -# "size": 4096, -# "address": 4060086272, -# "type": "memory" -# }, -# { -# "prefetch": false, -# "mem_type_64": false, -# "bar": 6, -# "size": 65536, -# "address": -1, -# "type": "memory" -# } -# ] -# }, -# { -# "bus": 0, -# "qdev_id": "", -# "irq": 11, -# "slot": 4, -# "class_info": { -# "class": 1280, -# "desc": "RAM controller" -# }, -# "id": { -# "device": 6900, -# "vendor": 4098 -# }, -# "function": 0, -# "regions": [ -# { -# "bar": 0, -# "size": 32, -# "address": 49280, -# "type": "io" -# } -# ] -# } -# ] -# } -# ] -# } -# -# Note: This example has been shortened as the real response is too long. -# -## -{ 'command': 'query-pci', 'returns': ['PciInfo'] } - -## -# @quit: -# -# This command will cause the QEMU process to exit gracefully. While every -# attempt is made to send the QMP response before terminating, this is not -# guaranteed. When using this interface, a premature EOF would not be -# unexpected. -# -# Since: 0.14.0 -# -# Example: -# -# -> { "execute": "quit" } -# <- { "return": {} } -## -{ 'command': 'quit' } - -## -# @stop: -# -# Stop all guest VCPU execution. -# -# Since: 0.14.0 -# -# Notes: This function will succeed even if the guest is already in the stopped -# state. In "inmigrate" state, it will ensure that the guest -# remains paused once migration finishes, as if the -S option was -# passed on the command line. -# -# Example: -# -# -> { "execute": "stop" } -# <- { "return": {} } -# -## -{ 'command': 'stop' } - -## -# @system_reset: -# -# Performs a hard reset of a guest. -# -# Since: 0.14.0 -# -# Example: -# -# -> { "execute": "system_reset" } -# <- { "return": {} } -# -## -{ 'command': 'system_reset' } - -## -# @system_powerdown: -# -# Requests that a guest perform a powerdown operation. -# -# Since: 0.14.0 -# -# Notes: A guest may or may not respond to this command. This command -# returning does not indicate that a guest has accepted the request or -# that it has shut down. Many guests will respond to this command by -# prompting the user in some way. -# Example: -# -# -> { "execute": "system_powerdown" } -# <- { "return": {} } -# -## -{ 'command': 'system_powerdown' } - -## -# @cpu-add: -# -# Adds CPU with specified ID -# -# @id: ID of CPU to be created, valid values [0..max_cpus) -# -# Returns: Nothing on success -# -# Since: 1.5 -# -# Example: -# -# -> { "execute": "cpu-add", "arguments": { "id": 2 } } -# <- { "return": {} } -# -## -{ 'command': 'cpu-add', 'data': {'id': 'int'} } - -## -# @memsave: -# -# Save a portion of guest memory to a file. -# -# @val: the virtual address of the guest to start from -# -# @size: the size of memory region to save -# -# @filename: the file to save the memory to as binary data -# -# @cpu-index: the index of the virtual CPU to use for translating the -# virtual address (defaults to CPU 0) -# -# Returns: Nothing on success -# -# Since: 0.14.0 -# -# Notes: Errors were not reliably returned until 1.1 -# -# Example: -# -# -> { "execute": "memsave", -# "arguments": { "val": 10, -# "size": 100, -# "filename": "/tmp/virtual-mem-dump" } } -# <- { "return": {} } -# -## -{ 'command': 'memsave', - 'data': {'val': 'int', 'size': 'int', 'filename': 'str', '*cpu-index': 'int'} } - -## -# @pmemsave: -# -# Save a portion of guest physical memory to a file. -# -# @val: the physical address of the guest to start from -# -# @size: the size of memory region to save -# -# @filename: the file to save the memory to as binary data -# -# Returns: Nothing on success -# -# Since: 0.14.0 -# -# Notes: Errors were not reliably returned until 1.1 -# -# Example: -# -# -> { "execute": "pmemsave", -# "arguments": { "val": 10, -# "size": 100, -# "filename": "/tmp/physical-mem-dump" } } -# <- { "return": {} } -# -## -{ 'command': 'pmemsave', - 'data': {'val': 'int', 'size': 'int', 'filename': 'str'} } - -## -# @cont: -# -# Resume guest VCPU execution. -# -# Since: 0.14.0 -# -# Returns: If successful, nothing -# -# Notes: This command will succeed if the guest is currently running. It -# will also succeed if the guest is in the "inmigrate" state; in -# this case, the effect of the command is to make sure the guest -# starts once migration finishes, removing the effect of the -S -# command line option if it was passed. -# -# Example: -# -# -> { "execute": "cont" } -# <- { "return": {} } -# -## -{ 'command': 'cont' } - -## -# @system_wakeup: -# -# Wakeup guest from suspend. Does nothing in case the guest isn't suspended. -# -# Since: 1.1 -# -# Returns: nothing. -# -# Example: -# -# -> { "execute": "system_wakeup" } -# <- { "return": {} } -# -## -{ 'command': 'system_wakeup' } - -## -# @inject-nmi: -# -# Injects a Non-Maskable Interrupt into the default CPU (x86/s390) or all CPUs (ppc64). -# The command fails when the guest doesn't support injecting. -# -# Returns: If successful, nothing -# -# Since: 0.14.0 -# -# Note: prior to 2.1, this command was only supported for x86 and s390 VMs -# -# Example: -# -# -> { "execute": "inject-nmi" } -# <- { "return": {} } -# -## -{ 'command': 'inject-nmi' } - -## -# @balloon: -# -# Request the balloon driver to change its balloon size. -# -# @value: the target size of the balloon in bytes -# -# Returns: Nothing on success -# If the balloon driver is enabled but not functional because the KVM -# kernel module cannot support it, KvmMissingCap -# If no balloon device is present, DeviceNotActive -# -# Notes: This command just issues a request to the guest. When it returns, -# the balloon size may not have changed. A guest can change the balloon -# size independent of this command. -# -# Since: 0.14.0 -# -# Example: -# -# -> { "execute": "balloon", "arguments": { "value": 536870912 } } -# <- { "return": {} } -# -## -{ 'command': 'balloon', 'data': {'value': 'int'} } - -## -# @human-monitor-command: -# -# Execute a command on the human monitor and return the output. -# -# @command-line: the command to execute in the human monitor -# -# @cpu-index: The CPU to use for commands that require an implicit CPU -# -# Returns: the output of the command as a string -# -# Since: 0.14.0 -# -# Notes: This command only exists as a stop-gap. Its use is highly -# discouraged. The semantics of this command are not -# guaranteed: this means that command names, arguments and -# responses can change or be removed at ANY time. Applications -# that rely on long term stability guarantees should NOT -# use this command. -# -# Known limitations: -# -# * This command is stateless, this means that commands that depend -# on state information (such as getfd) might not work -# -# * Commands that prompt the user for data don't currently work -# -# Example: -# -# -> { "execute": "human-monitor-command", -# "arguments": { "command-line": "info kvm" } } -# <- { "return": "kvm support: enabled\r\n" } -# -## -{ 'command': 'human-monitor-command', - 'data': {'command-line': 'str', '*cpu-index': 'int'}, - 'returns': 'str' } - -## -# @ObjectPropertyInfo: -# -# @name: the name of the property -# -# @type: the type of the property. This will typically come in one of four -# forms: -# -# 1) A primitive type such as 'u8', 'u16', 'bool', 'str', or 'double'. -# These types are mapped to the appropriate JSON type. -# -# 2) A child type in the form 'child<subtype>' where subtype is a qdev -# device type name. Child properties create the composition tree. -# -# 3) A link type in the form 'link<subtype>' where subtype is a qdev -# device type name. Link properties form the device model graph. -# -# Since: 1.2 -## -{ 'struct': 'ObjectPropertyInfo', - 'data': { 'name': 'str', 'type': 'str' } } - -## -# @qom-list: -# -# This command will list any properties of a object given a path in the object -# model. -# -# @path: the path within the object model. See @qom-get for a description of -# this parameter. -# -# Returns: a list of @ObjectPropertyInfo that describe the properties of the -# object. -# -# Since: 1.2 -## -{ 'command': 'qom-list', - 'data': { 'path': 'str' }, - 'returns': [ 'ObjectPropertyInfo' ] } - -## -# @qom-get: -# -# This command will get a property from a object model path and return the -# value. -# -# @path: The path within the object model. There are two forms of supported -# paths--absolute and partial paths. -# -# Absolute paths are derived from the root object and can follow child<> -# or link<> properties. Since they can follow link<> properties, they -# can be arbitrarily long. Absolute paths look like absolute filenames -# and are prefixed with a leading slash. -# -# Partial paths look like relative filenames. They do not begin -# with a prefix. The matching rules for partial paths are subtle but -# designed to make specifying objects easy. At each level of the -# composition tree, the partial path is matched as an absolute path. -# The first match is not returned. At least two matches are searched -# for. A successful result is only returned if only one match is -# found. If more than one match is found, a flag is return to -# indicate that the match was ambiguous. -# -# @property: The property name to read -# -# Returns: The property value. The type depends on the property -# type. child<> and link<> properties are returned as #str -# pathnames. All integer property types (u8, u16, etc) are -# returned as #int. -# -# Since: 1.2 -## -{ 'command': 'qom-get', - 'data': { 'path': 'str', 'property': 'str' }, - 'returns': 'any' } - -## -# @qom-set: -# -# This command will set a property from a object model path. -# -# @path: see @qom-get for a description of this parameter -# -# @property: the property name to set -# -# @value: a value who's type is appropriate for the property type. See @qom-get -# for a description of type mapping. -# -# Since: 1.2 -## -{ 'command': 'qom-set', - 'data': { 'path': 'str', 'property': 'str', 'value': 'any' } } - -## -# @change: -# -# This command is multiple commands multiplexed together. -# -# @device: This is normally the name of a block device but it may also be 'vnc'. -# when it's 'vnc', then sub command depends on @target -# -# @target: If @device is a block device, then this is the new filename. -# If @device is 'vnc', then if the value 'password' selects the vnc -# change password command. Otherwise, this specifies a new server URI -# address to listen to for VNC connections. -# -# @arg: If @device is a block device, then this is an optional format to open -# the device with. -# If @device is 'vnc' and @target is 'password', this is the new VNC -# password to set. See change-vnc-password for additional notes. -# -# Returns: Nothing on success. -# If @device is not a valid block device, DeviceNotFound -# -# Notes: This interface is deprecated, and it is strongly recommended that you -# avoid using it. For changing block devices, use -# blockdev-change-medium; for changing VNC parameters, use -# change-vnc-password. -# -# Since: 0.14.0 -# -# Example: -# -# 1. Change a removable medium -# -# -> { "execute": "change", -# "arguments": { "device": "ide1-cd0", -# "target": "/srv/images/Fedora-12-x86_64-DVD.iso" } } -# <- { "return": {} } -# -# 2. Change VNC password -# -# -> { "execute": "change", -# "arguments": { "device": "vnc", "target": "password", -# "arg": "foobar1" } } -# <- { "return": {} } -# -## -{ 'command': 'change', - 'data': {'device': 'str', 'target': 'str', '*arg': 'str'} } - -## -# @ObjectTypeInfo: -# -# This structure describes a search result from @qom-list-types -# -# @name: the type name found in the search -# -# @abstract: the type is abstract and can't be directly instantiated. -# Omitted if false. (since 2.10) -# -# @parent: Name of parent type, if any (since 2.10) -# -# Since: 1.1 -## -{ 'struct': 'ObjectTypeInfo', - 'data': { 'name': 'str', '*abstract': 'bool', '*parent': 'str' } } - -## -# @qom-list-types: -# -# This command will return a list of types given search parameters -# -# @implements: if specified, only return types that implement this type name -# -# @abstract: if true, include abstract types in the results -# -# Returns: a list of @ObjectTypeInfo or an empty list if no results are found -# -# Since: 1.1 -## -{ 'command': 'qom-list-types', - 'data': { '*implements': 'str', '*abstract': 'bool' }, - 'returns': [ 'ObjectTypeInfo' ] } - -## -# @DevicePropertyInfo: -# -# Information about device properties. -# -# @name: the name of the property -# @type: the typename of the property -# @description: if specified, the description of the property. -# (since 2.2) -# -# Since: 1.2 -## -{ 'struct': 'DevicePropertyInfo', - 'data': { 'name': 'str', 'type': 'str', '*description': 'str' } } - -## -# @device-list-properties: -# -# List properties associated with a device. -# -# @typename: the type name of a device -# -# Returns: a list of DevicePropertyInfo describing a devices properties -# -# Since: 1.2 -## -{ 'command': 'device-list-properties', - 'data': { 'typename': 'str'}, - 'returns': [ 'DevicePropertyInfo' ] } - -## -# @xen-set-global-dirty-log: -# -# Enable or disable the global dirty log mode. -# -# @enable: true to enable, false to disable. -# -# Returns: nothing -# -# Since: 1.3 -# -# Example: -# -# -> { "execute": "xen-set-global-dirty-log", -# "arguments": { "enable": true } } -# <- { "return": {} } -# -## -{ 'command': 'xen-set-global-dirty-log', 'data': { 'enable': 'bool' } } - -## -# @device_add: -# -# @driver: the name of the new device's driver -# -# @bus: the device's parent bus (device tree path) -# -# @id: the device's ID, must be unique -# -# Additional arguments depend on the type. -# -# Add a device. -# -# Notes: -# 1. For detailed information about this command, please refer to the -# 'docs/qdev-device-use.txt' file. -# -# 2. It's possible to list device properties by running QEMU with the -# "-device DEVICE,help" command-line argument, where DEVICE is the -# device's name -# -# Example: -# -# -> { "execute": "device_add", -# "arguments": { "driver": "e1000", "id": "net1", -# "bus": "pci.0", -# "mac": "52:54:00:12:34:56" } } -# <- { "return": {} } -# -# TODO: This command effectively bypasses QAPI completely due to its -# "additional arguments" business. It shouldn't have been added to -# the schema in this form. It should be qapified properly, or -# replaced by a properly qapified command. -# -# Since: 0.13 -## -{ 'command': 'device_add', - 'data': {'driver': 'str', '*bus': 'str', '*id': 'str'}, - 'gen': false } # so we can get the additional arguments - -## -# @device_del: -# -# Remove a device from a guest -# -# @id: the device's ID or QOM path -# -# Returns: Nothing on success -# If @id is not a valid device, DeviceNotFound -# -# Notes: When this command completes, the device may not be removed from the -# guest. Hot removal is an operation that requires guest cooperation. -# This command merely requests that the guest begin the hot removal -# process. Completion of the device removal process is signaled with a -# DEVICE_DELETED event. Guest reset will automatically complete removal -# for all devices. -# -# Since: 0.14.0 -# -# Example: -# -# -> { "execute": "device_del", -# "arguments": { "id": "net1" } } -# <- { "return": {} } -# -# -> { "execute": "device_del", -# "arguments": { "id": "/machine/peripheral-anon/device[0]" } } -# <- { "return": {} } -# -## -{ 'command': 'device_del', 'data': {'id': 'str'} } - -## -# @DEVICE_DELETED: -# -# Emitted whenever the device removal completion is acknowledged by the guest. -# At this point, it's safe to reuse the specified device ID. Device removal can -# be initiated by the guest or by HMP/QMP commands. -# -# @device: device name -# -# @path: device path -# -# Since: 1.5 -# -# Example: -# -# <- { "event": "DEVICE_DELETED", -# "data": { "device": "virtio-net-pci-0", -# "path": "/machine/peripheral/virtio-net-pci-0" }, -# "timestamp": { "seconds": 1265044230, "microseconds": 450486 } } -# -## -{ 'event': 'DEVICE_DELETED', - 'data': { '*device': 'str', 'path': 'str' } } - -## -# @DumpGuestMemoryFormat: -# -# An enumeration of guest-memory-dump's format. -# -# @elf: elf format -# -# @kdump-zlib: kdump-compressed format with zlib-compressed -# -# @kdump-lzo: kdump-compressed format with lzo-compressed -# -# @kdump-snappy: kdump-compressed format with snappy-compressed -# -# Since: 2.0 -## -{ 'enum': 'DumpGuestMemoryFormat', - 'data': [ 'elf', 'kdump-zlib', 'kdump-lzo', 'kdump-snappy' ] } - -## -# @dump-guest-memory: -# -# Dump guest's memory to vmcore. It is a synchronous operation that can take -# very long depending on the amount of guest memory. -# -# @paging: if true, do paging to get guest's memory mapping. This allows -# using gdb to process the core file. -# -# IMPORTANT: this option can make QEMU allocate several gigabytes -# of RAM. This can happen for a large guest, or a -# malicious guest pretending to be large. -# -# Also, paging=true has the following limitations: -# -# 1. The guest may be in a catastrophic state or can have corrupted -# memory, which cannot be trusted -# 2. The guest can be in real-mode even if paging is enabled. For -# example, the guest uses ACPI to sleep, and ACPI sleep state -# goes in real-mode -# 3. Currently only supported on i386 and x86_64. -# -# @protocol: the filename or file descriptor of the vmcore. The supported -# protocols are: -# -# 1. file: the protocol starts with "file:", and the following -# string is the file's path. -# 2. fd: the protocol starts with "fd:", and the following string -# is the fd's name. -# -# @detach: if true, QMP will return immediately rather than -# waiting for the dump to finish. The user can track progress -# using "query-dump". (since 2.6). -# -# @begin: if specified, the starting physical address. -# -# @length: if specified, the memory size, in bytes. If you don't -# want to dump all guest's memory, please specify the start @begin -# and @length -# -# @format: if specified, the format of guest memory dump. But non-elf -# format is conflict with paging and filter, ie. @paging, @begin and -# @length is not allowed to be specified with non-elf @format at the -# same time (since 2.0) -# -# Note: All boolean arguments default to false -# -# Returns: nothing on success -# -# Since: 1.2 -# -# Example: -# -# -> { "execute": "dump-guest-memory", -# "arguments": { "protocol": "fd:dump" } } -# <- { "return": {} } -# -## -{ 'command': 'dump-guest-memory', - 'data': { 'paging': 'bool', 'protocol': 'str', '*detach': 'bool', - '*begin': 'int', '*length': 'int', - '*format': 'DumpGuestMemoryFormat'} } - -## -# @DumpStatus: -# -# Describe the status of a long-running background guest memory dump. -# -# @none: no dump-guest-memory has started yet. -# -# @active: there is one dump running in background. -# -# @completed: the last dump has finished successfully. -# -# @failed: the last dump has failed. -# -# Since: 2.6 -## -{ 'enum': 'DumpStatus', - 'data': [ 'none', 'active', 'completed', 'failed' ] } - -## -# @DumpQueryResult: -# -# The result format for 'query-dump'. -# -# @status: enum of @DumpStatus, which shows current dump status -# -# @completed: bytes written in latest dump (uncompressed) -# -# @total: total bytes to be written in latest dump (uncompressed) -# -# Since: 2.6 -## -{ 'struct': 'DumpQueryResult', - 'data': { 'status': 'DumpStatus', - 'completed': 'int', - 'total': 'int' } } - -## -# @query-dump: -# -# Query latest dump status. -# -# Returns: A @DumpStatus object showing the dump status. -# -# Since: 2.6 -# -# Example: -# -# -> { "execute": "query-dump" } -# <- { "return": { "status": "active", "completed": 1024000, -# "total": 2048000 } } -# -## -{ 'command': 'query-dump', 'returns': 'DumpQueryResult' } - -## -# @DUMP_COMPLETED: -# -# Emitted when background dump has completed -# -# @result: DumpQueryResult type described in qapi-schema.json. -# -# @error: human-readable error string that provides -# hint on why dump failed. Only presents on failure. The -# user should not try to interpret the error string. -# -# Since: 2.6 -# -# Example: -# -# { "event": "DUMP_COMPLETED", -# "data": {"result": {"total": 1090650112, "status": "completed", -# "completed": 1090650112} } } -# -## -{ 'event': 'DUMP_COMPLETED' , - 'data': { 'result': 'DumpQueryResult', '*error': 'str' } } - -## -# @DumpGuestMemoryCapability: -# -# A list of the available formats for dump-guest-memory -# -# Since: 2.0 -## -{ 'struct': 'DumpGuestMemoryCapability', - 'data': { - 'formats': ['DumpGuestMemoryFormat'] } } - -## -# @query-dump-guest-memory-capability: -# -# Returns the available formats for dump-guest-memory -# -# Returns: A @DumpGuestMemoryCapability object listing available formats for -# dump-guest-memory -# -# Since: 2.0 -# -# Example: -# -# -> { "execute": "query-dump-guest-memory-capability" } -# <- { "return": { "formats": -# ["elf", "kdump-zlib", "kdump-lzo", "kdump-snappy"] } -# -## -{ 'command': 'query-dump-guest-memory-capability', - 'returns': 'DumpGuestMemoryCapability' } - -## -# @dump-skeys: -# -# Dump guest's storage keys -# -# @filename: the path to the file to dump to -# -# This command is only supported on s390 architecture. -# -# Since: 2.5 -# -# Example: -# -# -> { "execute": "dump-skeys", -# "arguments": { "filename": "/tmp/skeys" } } -# <- { "return": {} } -# -## -{ 'command': 'dump-skeys', - 'data': { 'filename': 'str' } } - -## -# @object-add: -# -# Create a QOM object. -# -# @qom-type: the class name for the object to be created -# -# @id: the name of the new object -# -# @props: a dictionary of properties to be passed to the backend -# -# Returns: Nothing on success -# Error if @qom-type is not a valid class name -# -# Since: 2.0 -# -# Example: -# -# -> { "execute": "object-add", -# "arguments": { "qom-type": "rng-random", "id": "rng1", -# "props": { "filename": "/dev/hwrng" } } } -# <- { "return": {} } -# -## -{ 'command': 'object-add', - 'data': {'qom-type': 'str', 'id': 'str', '*props': 'any'} } - -## -# @object-del: -# -# Remove a QOM object. -# -# @id: the name of the QOM object to remove -# -# Returns: Nothing on success -# Error if @id is not a valid id for a QOM object -# -# Since: 2.0 -# -# Example: -# -# -> { "execute": "object-del", "arguments": { "id": "rng1" } } -# <- { "return": {} } -# -## -{ 'command': 'object-del', 'data': {'id': 'str'} } - -## -# @getfd: -# -# Receive a file descriptor via SCM rights and assign it a name -# -# @fdname: file descriptor name -# -# Returns: Nothing on success -# -# Since: 0.14.0 -# -# Notes: If @fdname already exists, the file descriptor assigned to -# it will be closed and replaced by the received file -# descriptor. -# -# The 'closefd' command can be used to explicitly close the -# file descriptor when it is no longer needed. -# -# Example: -# -# -> { "execute": "getfd", "arguments": { "fdname": "fd1" } } -# <- { "return": {} } -# -## -{ 'command': 'getfd', 'data': {'fdname': 'str'} } - -## -# @closefd: -# -# Close a file descriptor previously passed via SCM rights -# -# @fdname: file descriptor name -# -# Returns: Nothing on success -# -# Since: 0.14.0 -# -# Example: -# -# -> { "execute": "closefd", "arguments": { "fdname": "fd1" } } -# <- { "return": {} } -# -## -{ 'command': 'closefd', 'data': {'fdname': 'str'} } - -## -# @MachineInfo: -# -# Information describing a machine. -# -# @name: the name of the machine -# -# @alias: an alias for the machine name -# -# @is-default: whether the machine is default -# -# @cpu-max: maximum number of CPUs supported by the machine type -# (since 1.5.0) -# -# @hotpluggable-cpus: cpu hotplug via -device is supported (since 2.7.0) -# -# Since: 1.2.0 -## -{ 'struct': 'MachineInfo', - 'data': { 'name': 'str', '*alias': 'str', - '*is-default': 'bool', 'cpu-max': 'int', - 'hotpluggable-cpus': 'bool'} } - -## -# @query-machines: -# -# Return a list of supported machines -# -# Returns: a list of MachineInfo -# -# Since: 1.2.0 -## -{ 'command': 'query-machines', 'returns': ['MachineInfo'] } - -## -# @CpuDefinitionInfo: -# -# Virtual CPU definition. -# -# @name: the name of the CPU definition -# -# @migration-safe: whether a CPU definition can be safely used for -# migration in combination with a QEMU compatibility machine -# when migrating between different QMU versions and between -# hosts with different sets of (hardware or software) -# capabilities. If not provided, information is not available -# and callers should not assume the CPU definition to be -# migration-safe. (since 2.8) -# -# @static: whether a CPU definition is static and will not change depending on -# QEMU version, machine type, machine options and accelerator options. -# A static model is always migration-safe. (since 2.8) -# -# @unavailable-features: List of properties that prevent -# the CPU model from running in the current -# host. (since 2.8) -# @typename: Type name that can be used as argument to @device-list-properties, -# to introspect properties configurable using -cpu or -global. -# (since 2.9) -# -# @unavailable-features is a list of QOM property names that -# represent CPU model attributes that prevent the CPU from running. -# If the QOM property is read-only, that means there's no known -# way to make the CPU model run in the current host. Implementations -# that choose not to provide specific information return the -# property name "type". -# If the property is read-write, it means that it MAY be possible -# to run the CPU model in the current host if that property is -# changed. Management software can use it as hints to suggest or -# choose an alternative for the user, or just to generate meaningful -# error messages explaining why the CPU model can't be used. -# If @unavailable-features is an empty list, the CPU model is -# runnable using the current host and machine-type. -# If @unavailable-features is not present, runnability -# information for the CPU is not available. -# -# Since: 1.2.0 -## -{ 'struct': 'CpuDefinitionInfo', - 'data': { 'name': 'str', '*migration-safe': 'bool', 'static': 'bool', - '*unavailable-features': [ 'str' ], 'typename': 'str' } } - -## -# @MemoryInfo: -# -# Actual memory information in bytes. -# -# @base-memory: size of "base" memory specified with command line -# option -m. -# -# @plugged-memory: size of memory that can be hot-unplugged. This field -# is omitted if target doesn't support memory hotplug -# (i.e. CONFIG_MEM_HOTPLUG not defined on build time). -# -# Since: 2.11.0 -## -{ 'struct': 'MemoryInfo', - 'data' : { 'base-memory': 'size', '*plugged-memory': 'size' } } - -## -# @query-memory-size-summary: -# -# Return the amount of initially allocated and present hotpluggable (if -# enabled) memory in bytes. -# -# Example: -# -# -> { "execute": "query-memory-size-summary" } -# <- { "return": { "base-memory": 4294967296, "plugged-memory": 0 } } -# -# Since: 2.11.0 -## -{ 'command': 'query-memory-size-summary', 'returns': 'MemoryInfo' } - -## -# @query-cpu-definitions: -# -# Return a list of supported virtual CPU definitions -# -# Returns: a list of CpuDefInfo -# -# Since: 1.2.0 -## -{ 'command': 'query-cpu-definitions', 'returns': ['CpuDefinitionInfo'] } - -## -# @CpuModelInfo: -# -# Virtual CPU model. -# -# A CPU model consists of the name of a CPU definition, to which -# delta changes are applied (e.g. features added/removed). Most magic values -# that an architecture might require should be hidden behind the name. -# However, if required, architectures can expose relevant properties. -# -# @name: the name of the CPU definition the model is based on -# @props: a dictionary of QOM properties to be applied -# -# Since: 2.8.0 -## -{ 'struct': 'CpuModelInfo', - 'data': { 'name': 'str', - '*props': 'any' } } - -## -# @CpuModelExpansionType: -# -# An enumeration of CPU model expansion types. -# -# @static: Expand to a static CPU model, a combination of a static base -# model name and property delta changes. As the static base model will -# never change, the expanded CPU model will be the same, independent of -# independent of QEMU version, machine type, machine options, and -# accelerator options. Therefore, the resulting model can be used by -# tooling without having to specify a compatibility machine - e.g. when -# displaying the "host" model. static CPU models are migration-safe. -# -# @full: Expand all properties. The produced model is not guaranteed to be -# migration-safe, but allows tooling to get an insight and work with -# model details. -# -# Note: When a non-migration-safe CPU model is expanded in static mode, some -# features enabled by the CPU model may be omitted, because they can't be -# implemented by a static CPU model definition (e.g. cache info passthrough and -# PMU passthrough in x86). If you need an accurate representation of the -# features enabled by a non-migration-safe CPU model, use @full. If you need a -# static representation that will keep ABI compatibility even when changing QEMU -# version or machine-type, use @static (but keep in mind that some features may -# be omitted). -# -# Since: 2.8.0 -## -{ 'enum': 'CpuModelExpansionType', - 'data': [ 'static', 'full' ] } - - -## -# @CpuModelExpansionInfo: -# -# The result of a cpu model expansion. -# -# @model: the expanded CpuModelInfo. -# -# Since: 2.8.0 -## -{ 'struct': 'CpuModelExpansionInfo', - 'data': { 'model': 'CpuModelInfo' } } - - -## -# @query-cpu-model-expansion: -# -# Expands a given CPU model (or a combination of CPU model + additional options) -# to different granularities, allowing tooling to get an understanding what a -# specific CPU model looks like in QEMU under a certain configuration. -# -# This interface can be used to query the "host" CPU model. -# -# The data returned by this command may be affected by: -# -# * QEMU version: CPU models may look different depending on the QEMU version. -# (Except for CPU models reported as "static" in query-cpu-definitions.) -# * machine-type: CPU model may look different depending on the machine-type. -# (Except for CPU models reported as "static" in query-cpu-definitions.) -# * machine options (including accelerator): in some architectures, CPU models -# may look different depending on machine and accelerator options. (Except for -# CPU models reported as "static" in query-cpu-definitions.) -# * "-cpu" arguments and global properties: arguments to the -cpu option and -# global properties may affect expansion of CPU models. Using -# query-cpu-model-expansion while using these is not advised. -# -# Some architectures may not support all expansion types. s390x supports -# "full" and "static". -# -# Returns: a CpuModelExpansionInfo. Returns an error if expanding CPU models is -# not supported, if the model cannot be expanded, if the model contains -# an unknown CPU definition name, unknown properties or properties -# with a wrong type. Also returns an error if an expansion type is -# not supported. -# -# Since: 2.8.0 -## -{ 'command': 'query-cpu-model-expansion', - 'data': { 'type': 'CpuModelExpansionType', - 'model': 'CpuModelInfo' }, - 'returns': 'CpuModelExpansionInfo' } - -## -# @CpuModelCompareResult: -# -# An enumeration of CPU model comparison results. The result is usually -# calculated using e.g. CPU features or CPU generations. -# -# @incompatible: If model A is incompatible to model B, model A is not -# guaranteed to run where model B runs and the other way around. -# -# @identical: If model A is identical to model B, model A is guaranteed to run -# where model B runs and the other way around. -# -# @superset: If model A is a superset of model B, model B is guaranteed to run -# where model A runs. There are no guarantees about the other way. -# -# @subset: If model A is a subset of model B, model A is guaranteed to run -# where model B runs. There are no guarantees about the other way. -# -# Since: 2.8.0 -## -{ 'enum': 'CpuModelCompareResult', - 'data': [ 'incompatible', 'identical', 'superset', 'subset' ] } - -## -# @CpuModelCompareInfo: -# -# The result of a CPU model comparison. -# -# @result: The result of the compare operation. -# @responsible-properties: List of properties that led to the comparison result -# not being identical. -# -# @responsible-properties is a list of QOM property names that led to -# both CPUs not being detected as identical. For identical models, this -# list is empty. -# If a QOM property is read-only, that means there's no known way to make the -# CPU models identical. If the special property name "type" is included, the -# models are by definition not identical and cannot be made identical. -# -# Since: 2.8.0 -## -{ 'struct': 'CpuModelCompareInfo', - 'data': {'result': 'CpuModelCompareResult', - 'responsible-properties': ['str'] - } -} - -## -# @query-cpu-model-comparison: -# -# Compares two CPU models, returning how they compare in a specific -# configuration. The results indicates how both models compare regarding -# runnability. This result can be used by tooling to make decisions if a -# certain CPU model will run in a certain configuration or if a compatible -# CPU model has to be created by baselining. -# -# Usually, a CPU model is compared against the maximum possible CPU model -# of a certain configuration (e.g. the "host" model for KVM). If that CPU -# model is identical or a subset, it will run in that configuration. -# -# The result returned by this command may be affected by: -# -# * QEMU version: CPU models may look different depending on the QEMU version. -# (Except for CPU models reported as "static" in query-cpu-definitions.) -# * machine-type: CPU model may look different depending on the machine-type. -# (Except for CPU models reported as "static" in query-cpu-definitions.) -# * machine options (including accelerator): in some architectures, CPU models -# may look different depending on machine and accelerator options. (Except for -# CPU models reported as "static" in query-cpu-definitions.) -# * "-cpu" arguments and global properties: arguments to the -cpu option and -# global properties may affect expansion of CPU models. Using -# query-cpu-model-expansion while using these is not advised. -# -# Some architectures may not support comparing CPU models. s390x supports -# comparing CPU models. -# -# Returns: a CpuModelBaselineInfo. Returns an error if comparing CPU models is -# not supported, if a model cannot be used, if a model contains -# an unknown cpu definition name, unknown properties or properties -# with wrong types. -# -# Since: 2.8.0 -## -{ 'command': 'query-cpu-model-comparison', - 'data': { 'modela': 'CpuModelInfo', 'modelb': 'CpuModelInfo' }, - 'returns': 'CpuModelCompareInfo' } - -## -# @CpuModelBaselineInfo: -# -# The result of a CPU model baseline. -# -# @model: the baselined CpuModelInfo. -# -# Since: 2.8.0 -## -{ 'struct': 'CpuModelBaselineInfo', - 'data': { 'model': 'CpuModelInfo' } } - -## -# @query-cpu-model-baseline: -# -# Baseline two CPU models, creating a compatible third model. The created -# model will always be a static, migration-safe CPU model (see "static" -# CPU model expansion for details). -# -# This interface can be used by tooling to create a compatible CPU model out -# two CPU models. The created CPU model will be identical to or a subset of -# both CPU models when comparing them. Therefore, the created CPU model is -# guaranteed to run where the given CPU models run. -# -# The result returned by this command may be affected by: -# -# * QEMU version: CPU models may look different depending on the QEMU version. -# (Except for CPU models reported as "static" in query-cpu-definitions.) -# * machine-type: CPU model may look different depending on the machine-type. -# (Except for CPU models reported as "static" in query-cpu-definitions.) -# * machine options (including accelerator): in some architectures, CPU models -# may look different depending on machine and accelerator options. (Except for -# CPU models reported as "static" in query-cpu-definitions.) -# * "-cpu" arguments and global properties: arguments to the -cpu option and -# global properties may affect expansion of CPU models. Using -# query-cpu-model-expansion while using these is not advised. -# -# Some architectures may not support baselining CPU models. s390x supports -# baselining CPU models. -# -# Returns: a CpuModelBaselineInfo. Returns an error if baselining CPU models is -# not supported, if a model cannot be used, if a model contains -# an unknown cpu definition name, unknown properties or properties -# with wrong types. -# -# Since: 2.8.0 -## -{ 'command': 'query-cpu-model-baseline', - 'data': { 'modela': 'CpuModelInfo', - 'modelb': 'CpuModelInfo' }, - 'returns': 'CpuModelBaselineInfo' } - -## -# @AddfdInfo: -# -# Information about a file descriptor that was added to an fd set. -# -# @fdset-id: The ID of the fd set that @fd was added to. -# -# @fd: The file descriptor that was received via SCM rights and -# added to the fd set. -# -# Since: 1.2.0 -## -{ 'struct': 'AddfdInfo', 'data': {'fdset-id': 'int', 'fd': 'int'} } - -## -# @add-fd: -# -# Add a file descriptor, that was passed via SCM rights, to an fd set. -# -# @fdset-id: The ID of the fd set to add the file descriptor to. -# -# @opaque: A free-form string that can be used to describe the fd. -# -# Returns: @AddfdInfo on success -# -# If file descriptor was not received, FdNotSupplied -# -# If @fdset-id is a negative value, InvalidParameterValue -# -# Notes: The list of fd sets is shared by all monitor connections. -# -# If @fdset-id is not specified, a new fd set will be created. -# -# Since: 1.2.0 -# -# Example: -# -# -> { "execute": "add-fd", "arguments": { "fdset-id": 1 } } -# <- { "return": { "fdset-id": 1, "fd": 3 } } -# -## -{ 'command': 'add-fd', 'data': {'*fdset-id': 'int', '*opaque': 'str'}, - 'returns': 'AddfdInfo' } - -## -# @remove-fd: -# -# Remove a file descriptor from an fd set. -# -# @fdset-id: The ID of the fd set that the file descriptor belongs to. -# -# @fd: The file descriptor that is to be removed. -# -# Returns: Nothing on success -# If @fdset-id or @fd is not found, FdNotFound -# -# Since: 1.2.0 -# -# Notes: The list of fd sets is shared by all monitor connections. -# -# If @fd is not specified, all file descriptors in @fdset-id -# will be removed. -# -# Example: -# -# -> { "execute": "remove-fd", "arguments": { "fdset-id": 1, "fd": 3 } } -# <- { "return": {} } -# -## -{ 'command': 'remove-fd', 'data': {'fdset-id': 'int', '*fd': 'int'} } - -## -# @FdsetFdInfo: -# -# Information about a file descriptor that belongs to an fd set. -# -# @fd: The file descriptor value. -# -# @opaque: A free-form string that can be used to describe the fd. -# -# Since: 1.2.0 -## -{ 'struct': 'FdsetFdInfo', - 'data': {'fd': 'int', '*opaque': 'str'} } - -## -# @FdsetInfo: -# -# Information about an fd set. -# -# @fdset-id: The ID of the fd set. -# -# @fds: A list of file descriptors that belong to this fd set. -# -# Since: 1.2.0 -## -{ 'struct': 'FdsetInfo', - 'data': {'fdset-id': 'int', 'fds': ['FdsetFdInfo']} } - -## -# @query-fdsets: -# -# Return information describing all fd sets. -# -# Returns: A list of @FdsetInfo -# -# Since: 1.2.0 -# -# Note: The list of fd sets is shared by all monitor connections. -# -# Example: -# -# -> { "execute": "query-fdsets" } -# <- { "return": [ -# { -# "fds": [ -# { -# "fd": 30, -# "opaque": "rdonly:/path/to/file" -# }, -# { -# "fd": 24, -# "opaque": "rdwr:/path/to/file" -# } -# ], -# "fdset-id": 1 -# }, -# { -# "fds": [ -# { -# "fd": 28 -# }, -# { -# "fd": 29 -# } -# ], -# "fdset-id": 0 -# } -# ] -# } -# -## -{ 'command': 'query-fdsets', 'returns': ['FdsetInfo'] } - -## -# @TargetInfo: -# -# Information describing the QEMU target. -# -# @arch: the target architecture (eg "x86_64", "i386", etc) -# -# Since: 1.2.0 -## -{ 'struct': 'TargetInfo', - 'data': { 'arch': 'str' } } - -## -# @query-target: -# -# Return information about the target for this QEMU -# -# Returns: TargetInfo -# -# Since: 1.2.0 -## -{ 'command': 'query-target', 'returns': 'TargetInfo' } - -## -# @AcpiTableOptions: -# -# Specify an ACPI table on the command line to load. -# -# At most one of @file and @data can be specified. The list of files specified -# by any one of them is loaded and concatenated in order. If both are omitted, -# @data is implied. -# -# Other fields / optargs can be used to override fields of the generic ACPI -# table header; refer to the ACPI specification 5.0, section 5.2.6 System -# Description Table Header. If a header field is not overridden, then the -# corresponding value from the concatenated blob is used (in case of @file), or -# it is filled in with a hard-coded value (in case of @data). -# -# String fields are copied into the matching ACPI member from lowest address -# upwards, and silently truncated / NUL-padded to length. -# -# @sig: table signature / identifier (4 bytes) -# -# @rev: table revision number (dependent on signature, 1 byte) -# -# @oem_id: OEM identifier (6 bytes) -# -# @oem_table_id: OEM table identifier (8 bytes) -# -# @oem_rev: OEM-supplied revision number (4 bytes) -# -# @asl_compiler_id: identifier of the utility that created the table -# (4 bytes) -# -# @asl_compiler_rev: revision number of the utility that created the -# table (4 bytes) -# -# @file: colon (:) separated list of pathnames to load and -# concatenate as table data. The resultant binary blob is expected to -# have an ACPI table header. At least one file is required. This field -# excludes @data. -# -# @data: colon (:) separated list of pathnames to load and -# concatenate as table data. The resultant binary blob must not have an -# ACPI table header. At least one file is required. This field excludes -# @file. -# -# Since: 1.5 -## -{ 'struct': 'AcpiTableOptions', - 'data': { - '*sig': 'str', - '*rev': 'uint8', - '*oem_id': 'str', - '*oem_table_id': 'str', - '*oem_rev': 'uint32', - '*asl_compiler_id': 'str', - '*asl_compiler_rev': 'uint32', - '*file': 'str', - '*data': 'str' }} - -## -# @CommandLineParameterType: -# -# Possible types for an option parameter. -# -# @string: accepts a character string -# -# @boolean: accepts "on" or "off" -# -# @number: accepts a number -# -# @size: accepts a number followed by an optional suffix (K)ilo, -# (M)ega, (G)iga, (T)era -# -# Since: 1.5 -## -{ 'enum': 'CommandLineParameterType', - 'data': ['string', 'boolean', 'number', 'size'] } - -## -# @CommandLineParameterInfo: -# -# Details about a single parameter of a command line option. -# -# @name: parameter name -# -# @type: parameter @CommandLineParameterType -# -# @help: human readable text string, not suitable for parsing. -# -# @default: default value string (since 2.1) -# -# Since: 1.5 -## -{ 'struct': 'CommandLineParameterInfo', - 'data': { 'name': 'str', - 'type': 'CommandLineParameterType', - '*help': 'str', - '*default': 'str' } } - -## -# @CommandLineOptionInfo: -# -# Details about a command line option, including its list of parameter details -# -# @option: option name -# -# @parameters: an array of @CommandLineParameterInfo -# -# Since: 1.5 -## -{ 'struct': 'CommandLineOptionInfo', - 'data': { 'option': 'str', 'parameters': ['CommandLineParameterInfo'] } } - -## -# @query-command-line-options: -# -# Query command line option schema. -# -# @option: option name -# -# Returns: list of @CommandLineOptionInfo for all options (or for the given -# @option). Returns an error if the given @option doesn't exist. -# -# Since: 1.5 -# -# Example: -# -# -> { "execute": "query-command-line-options", -# "arguments": { "option": "option-rom" } } -# <- { "return": [ -# { -# "parameters": [ -# { -# "name": "romfile", -# "type": "string" -# }, -# { -# "name": "bootindex", -# "type": "number" -# } -# ], -# "option": "option-rom" -# } -# ] -# } -# -## -{'command': 'query-command-line-options', 'data': { '*option': 'str' }, - 'returns': ['CommandLineOptionInfo'] } - -## -# @X86CPURegister32: -# -# A X86 32-bit register -# -# Since: 1.5 -## -{ 'enum': 'X86CPURegister32', - 'data': [ 'EAX', 'EBX', 'ECX', 'EDX', 'ESP', 'EBP', 'ESI', 'EDI' ] } - -## -# @X86CPUFeatureWordInfo: -# -# Information about a X86 CPU feature word -# -# @cpuid-input-eax: Input EAX value for CPUID instruction for that feature word -# -# @cpuid-input-ecx: Input ECX value for CPUID instruction for that -# feature word -# -# @cpuid-register: Output register containing the feature bits -# -# @features: value of output register, containing the feature bits -# -# Since: 1.5 -## -{ 'struct': 'X86CPUFeatureWordInfo', - 'data': { 'cpuid-input-eax': 'int', - '*cpuid-input-ecx': 'int', - 'cpuid-register': 'X86CPURegister32', - 'features': 'int' } } - -## -# @DummyForceArrays: -# -# Not used by QMP; hack to let us use X86CPUFeatureWordInfoList internally -# -# Since: 2.5 -## -{ 'struct': 'DummyForceArrays', - 'data': { 'unused': ['X86CPUFeatureWordInfo'] } } - - -## -# @NumaOptionsType: -# -# @node: NUMA nodes configuration -# -# @dist: NUMA distance configuration (since 2.10) -# -# @cpu: property based CPU(s) to node mapping (Since: 2.10) -# -# Since: 2.1 -## -{ 'enum': 'NumaOptionsType', - 'data': [ 'node', 'dist', 'cpu' ] } - -## -# @NumaOptions: -# -# A discriminated record of NUMA options. (for OptsVisitor) -# -# Since: 2.1 -## -{ 'union': 'NumaOptions', - 'base': { 'type': 'NumaOptionsType' }, - 'discriminator': 'type', - 'data': { - 'node': 'NumaNodeOptions', - 'dist': 'NumaDistOptions', - 'cpu': 'NumaCpuOptions' }} - -## -# @NumaNodeOptions: -# -# Create a guest NUMA node. (for OptsVisitor) -# -# @nodeid: NUMA node ID (increase by 1 from 0 if omitted) -# -# @cpus: VCPUs belonging to this node (assign VCPUS round-robin -# if omitted) -# -# @mem: memory size of this node; mutually exclusive with @memdev. -# Equally divide total memory among nodes if both @mem and @memdev are -# omitted. -# -# @memdev: memory backend object. If specified for one node, -# it must be specified for all nodes. -# -# Since: 2.1 -## -{ 'struct': 'NumaNodeOptions', - 'data': { - '*nodeid': 'uint16', - '*cpus': ['uint16'], - '*mem': 'size', - '*memdev': 'str' }} - -## -# @NumaDistOptions: -# -# Set the distance between 2 NUMA nodes. -# -# @src: source NUMA node. -# -# @dst: destination NUMA node. -# -# @val: NUMA distance from source node to destination node. -# When a node is unreachable from another node, set the distance -# between them to 255. -# -# Since: 2.10 -## -{ 'struct': 'NumaDistOptions', - 'data': { - 'src': 'uint16', - 'dst': 'uint16', - 'val': 'uint8' }} - -## -# @NumaCpuOptions: -# -# Option "-numa cpu" overrides default cpu to node mapping. -# It accepts the same set of cpu properties as returned by -# query-hotpluggable-cpus[].props, where node-id could be used to -# override default node mapping. -# -# Since: 2.10 -## -{ 'struct': 'NumaCpuOptions', - 'base': 'CpuInstanceProperties', - 'data' : {} } - -## -# @HostMemPolicy: -# -# Host memory policy types -# -# @default: restore default policy, remove any nondefault policy -# -# @preferred: set the preferred host nodes for allocation -# -# @bind: a strict policy that restricts memory allocation to the -# host nodes specified -# -# @interleave: memory allocations are interleaved across the set -# of host nodes specified -# -# Since: 2.1 -## -{ 'enum': 'HostMemPolicy', - 'data': [ 'default', 'preferred', 'bind', 'interleave' ] } - -## -# @Memdev: -# -# Information about memory backend -# -# @id: backend's ID if backend has 'id' property (since 2.9) -# -# @size: memory backend size -# -# @merge: enables or disables memory merge support -# -# @dump: includes memory backend's memory in a core dump or not -# -# @prealloc: enables or disables memory preallocation -# -# @host-nodes: host nodes for its memory policy -# -# @policy: memory policy of memory backend -# -# Since: 2.1 -## -{ 'struct': 'Memdev', - 'data': { - '*id': 'str', - 'size': 'size', - 'merge': 'bool', - 'dump': 'bool', - 'prealloc': 'bool', - 'host-nodes': ['uint16'], - 'policy': 'HostMemPolicy' }} - -## -# @query-memdev: -# -# Returns information for all memory backends. -# -# Returns: a list of @Memdev. -# -# Since: 2.1 -# -# Example: -# -# -> { "execute": "query-memdev" } -# <- { "return": [ -# { -# "id": "mem1", -# "size": 536870912, -# "merge": false, -# "dump": true, -# "prealloc": false, -# "host-nodes": [0, 1], -# "policy": "bind" -# }, -# { -# "size": 536870912, -# "merge": false, -# "dump": true, -# "prealloc": true, -# "host-nodes": [2, 3], -# "policy": "preferred" -# } -# ] -# } -# -## -{ 'command': 'query-memdev', 'returns': ['Memdev'] } - -## -# @PCDIMMDeviceInfo: -# -# PCDIMMDevice state information -# -# @id: device's ID -# -# @addr: physical address, where device is mapped -# -# @size: size of memory that the device provides -# -# @slot: slot number at which device is plugged in -# -# @node: NUMA node number where device is plugged in -# -# @memdev: memory backend linked with device -# -# @hotplugged: true if device was hotplugged -# -# @hotpluggable: true if device if could be added/removed while machine is running -# -# Since: 2.1 -## -{ 'struct': 'PCDIMMDeviceInfo', - 'data': { '*id': 'str', - 'addr': 'int', - 'size': 'int', - 'slot': 'int', - 'node': 'int', - 'memdev': 'str', - 'hotplugged': 'bool', - 'hotpluggable': 'bool' - } -} - -## -# @MemoryDeviceInfo: -# -# Union containing information about a memory device -# -# Since: 2.1 -## -{ 'union': 'MemoryDeviceInfo', 'data': {'dimm': 'PCDIMMDeviceInfo'} } - -## -# @query-memory-devices: -# -# Lists available memory devices and their state -# -# Since: 2.1 -# -# Example: -# -# -> { "execute": "query-memory-devices" } -# <- { "return": [ { "data": -# { "addr": 5368709120, -# "hotpluggable": true, -# "hotplugged": true, -# "id": "d1", -# "memdev": "/objects/memX", -# "node": 0, -# "size": 1073741824, -# "slot": 0}, -# "type": "dimm" -# } ] } -# -## -{ 'command': 'query-memory-devices', 'returns': ['MemoryDeviceInfo'] } - -## -# @MEM_UNPLUG_ERROR: -# -# Emitted when memory hot unplug error occurs. -# -# @device: device name -# -# @msg: Informative message -# -# Since: 2.4 -# -# Example: -# -# <- { "event": "MEM_UNPLUG_ERROR" -# "data": { "device": "dimm1", -# "msg": "acpi: device unplug for unsupported device" -# }, -# "timestamp": { "seconds": 1265044230, "microseconds": 450486 } } -# -## -{ 'event': 'MEM_UNPLUG_ERROR', - 'data': { 'device': 'str', 'msg': 'str' } } - -## -# @ACPISlotType: -# -# @DIMM: memory slot -# @CPU: logical CPU slot (since 2.7) -## -{ 'enum': 'ACPISlotType', 'data': [ 'DIMM', 'CPU' ] } - -## -# @ACPIOSTInfo: -# -# OSPM Status Indication for a device -# For description of possible values of @source and @status fields -# see "_OST (OSPM Status Indication)" chapter of ACPI5.0 spec. -# -# @device: device ID associated with slot -# -# @slot: slot ID, unique per slot of a given @slot-type -# -# @slot-type: type of the slot -# -# @source: an integer containing the source event -# -# @status: an integer containing the status code -# -# Since: 2.1 -## -{ 'struct': 'ACPIOSTInfo', - 'data' : { '*device': 'str', - 'slot': 'str', - 'slot-type': 'ACPISlotType', - 'source': 'int', - 'status': 'int' } } - -## -# @query-acpi-ospm-status: -# -# Return a list of ACPIOSTInfo for devices that support status -# reporting via ACPI _OST method. -# -# Since: 2.1 -# -# Example: -# -# -> { "execute": "query-acpi-ospm-status" } -# <- { "return": [ { "device": "d1", "slot": "0", "slot-type": "DIMM", "source": 1, "status": 0}, -# { "slot": "1", "slot-type": "DIMM", "source": 0, "status": 0}, -# { "slot": "2", "slot-type": "DIMM", "source": 0, "status": 0}, -# { "slot": "3", "slot-type": "DIMM", "source": 0, "status": 0} -# ]} -# -## -{ 'command': 'query-acpi-ospm-status', 'returns': ['ACPIOSTInfo'] } - -## -# @ACPI_DEVICE_OST: -# -# Emitted when guest executes ACPI _OST method. -# -# @info: ACPIOSTInfo type as described in qapi-schema.json -# -# Since: 2.1 -# -# Example: -# -# <- { "event": "ACPI_DEVICE_OST", -# "data": { "device": "d1", "slot": "0", -# "slot-type": "DIMM", "source": 1, "status": 0 } } -# -## -{ 'event': 'ACPI_DEVICE_OST', - 'data': { 'info': 'ACPIOSTInfo' } } - -## -# @rtc-reset-reinjection: -# -# This command will reset the RTC interrupt reinjection backlog. -# Can be used if another mechanism to synchronize guest time -# is in effect, for example QEMU guest agent's guest-set-time -# command. -# -# Since: 2.1 -# -# Example: -# -# -> { "execute": "rtc-reset-reinjection" } -# <- { "return": {} } -# -## -{ 'command': 'rtc-reset-reinjection' } - -## -# @RTC_CHANGE: -# -# Emitted when the guest changes the RTC time. -# -# @offset: offset between base RTC clock (as specified by -rtc base), and -# new RTC clock value -# -# Note: This event is rate-limited. -# -# Since: 0.13.0 -# -# Example: -# -# <- { "event": "RTC_CHANGE", -# "data": { "offset": 78 }, -# "timestamp": { "seconds": 1267020223, "microseconds": 435656 } } -# -## -{ 'event': 'RTC_CHANGE', - 'data': { 'offset': 'int' } } - -## -# @ReplayMode: -# -# Mode of the replay subsystem. -# -# @none: normal execution mode. Replay or record are not enabled. -# -# @record: record mode. All non-deterministic data is written into the -# replay log. -# -# @play: replay mode. Non-deterministic data required for system execution -# is read from the log. -# -# Since: 2.5 -## -{ 'enum': 'ReplayMode', - 'data': [ 'none', 'record', 'play' ] } - -## -# @xen-load-devices-state: -# -# Load the state of all devices from file. The RAM and the block devices -# of the VM are not loaded by this command. -# -# @filename: the file to load the state of the devices from as binary -# data. See xen-save-devices-state.txt for a description of the binary -# format. -# -# Since: 2.7 -# -# Example: -# -# -> { "execute": "xen-load-devices-state", -# "arguments": { "filename": "/tmp/resume" } } -# <- { "return": {} } -# -## -{ 'command': 'xen-load-devices-state', 'data': {'filename': 'str'} } - -## -# @GICCapability: -# -# The struct describes capability for a specific GIC (Generic -# Interrupt Controller) version. These bits are not only decided by -# QEMU/KVM software version, but also decided by the hardware that -# the program is running upon. -# -# @version: version of GIC to be described. Currently, only 2 and 3 -# are supported. -# -# @emulated: whether current QEMU/hardware supports emulated GIC -# device in user space. -# -# @kernel: whether current QEMU/hardware supports hardware -# accelerated GIC device in kernel. -# -# Since: 2.6 -## -{ 'struct': 'GICCapability', - 'data': { 'version': 'int', - 'emulated': 'bool', - 'kernel': 'bool' } } - -## -# @query-gic-capabilities: -# -# This command is ARM-only. It will return a list of GICCapability -# objects that describe its capability bits. -# -# Returns: a list of GICCapability objects. -# -# Since: 2.6 -# -# Example: -# -# -> { "execute": "query-gic-capabilities" } -# <- { "return": [{ "version": 2, "emulated": true, "kernel": false }, -# { "version": 3, "emulated": false, "kernel": true } ] } -# -## -{ 'command': 'query-gic-capabilities', 'returns': ['GICCapability'] } - -## -# @CpuInstanceProperties: -# -# List of properties to be used for hotplugging a CPU instance, -# it should be passed by management with device_add command when -# a CPU is being hotplugged. -# -# @node-id: NUMA node ID the CPU belongs to -# @socket-id: socket number within node/board the CPU belongs to -# @core-id: core number within socket the CPU belongs to -# @thread-id: thread number within core the CPU belongs to -# -# Note: currently there are 4 properties that could be present -# but management should be prepared to pass through other -# properties with device_add command to allow for future -# interface extension. This also requires the filed names to be kept in -# sync with the properties passed to -device/device_add. -# -# Since: 2.7 -## -{ 'struct': 'CpuInstanceProperties', - 'data': { '*node-id': 'int', - '*socket-id': 'int', - '*core-id': 'int', - '*thread-id': 'int' - } -} - -## -# @HotpluggableCPU: -# -# @type: CPU object type for usage with device_add command -# @props: list of properties to be used for hotplugging CPU -# @vcpus-count: number of logical VCPU threads @HotpluggableCPU provides -# @qom-path: link to existing CPU object if CPU is present or -# omitted if CPU is not present. -# -# Since: 2.7 -## -{ 'struct': 'HotpluggableCPU', - 'data': { 'type': 'str', - 'vcpus-count': 'int', - 'props': 'CpuInstanceProperties', - '*qom-path': 'str' - } -} - -## -# @query-hotpluggable-cpus: -# -# Returns: a list of HotpluggableCPU objects. -# -# Since: 2.7 -# -# Example: -# -# For pseries machine type started with -smp 2,cores=2,maxcpus=4 -cpu POWER8: -# -# -> { "execute": "query-hotpluggable-cpus" } -# <- {"return": [ -# { "props": { "core": 8 }, "type": "POWER8-spapr-cpu-core", -# "vcpus-count": 1 }, -# { "props": { "core": 0 }, "type": "POWER8-spapr-cpu-core", -# "vcpus-count": 1, "qom-path": "/machine/unattached/device[0]"} -# ]}' -# -# For pc machine type started with -smp 1,maxcpus=2: -# -# -> { "execute": "query-hotpluggable-cpus" } -# <- {"return": [ -# { -# "type": "qemu64-x86_64-cpu", "vcpus-count": 1, -# "props": {"core-id": 0, "socket-id": 1, "thread-id": 0} -# }, -# { -# "qom-path": "/machine/unattached/device[0]", -# "type": "qemu64-x86_64-cpu", "vcpus-count": 1, -# "props": {"core-id": 0, "socket-id": 0, "thread-id": 0} -# } -# ]} -# -# For s390x-virtio-ccw machine type started with -smp 1,maxcpus=2 -cpu qemu -# (Since: 2.11): -# -# -> { "execute": "query-hotpluggable-cpus" } -# <- {"return": [ -# { -# "type": "qemu-s390x-cpu", "vcpus-count": 1, -# "props": { "core-id": 1 } -# }, -# { -# "qom-path": "/machine/unattached/device[0]", -# "type": "qemu-s390x-cpu", "vcpus-count": 1, -# "props": { "core-id": 0 } -# } -# ]} -# -## -{ 'command': 'query-hotpluggable-cpus', 'returns': ['HotpluggableCPU'] } - -## -# @GuidInfo: -# -# GUID information. -# -# @guid: the globally unique identifier -# -# Since: 2.9 -## -{ 'struct': 'GuidInfo', 'data': {'guid': 'str'} } - -## -# @query-vm-generation-id: -# -# Show Virtual Machine Generation ID -# -# Since: 2.9 -## -{ 'command': 'query-vm-generation-id', 'returns': 'GuidInfo' } +{ 'include': 'qapi/misc.json' } diff --git a/qapi/misc.json b/qapi/misc.json new file mode 100644 index 00000000000..dabc987f7a7 --- /dev/null +++ b/qapi/misc.json @@ -0,0 +1,3201 @@ +# -*- Mode: Python -*- +# + +## +# = Miscellanea +## + +## +# @qmp_capabilities: +# +# Enable QMP capabilities. +# +# Arguments: None. +# +# Example: +# +# -> { "execute": "qmp_capabilities" } +# <- { "return": {} } +# +# Notes: This command is valid exactly when first connecting: it must be +# issued before any other command will be accepted, and will fail once the +# monitor is accepting other commands. (see qemu docs/interop/qmp-spec.txt) +# +# Since: 0.13 +# +## +{ 'command': 'qmp_capabilities' } + +## +# @VersionTriple: +# +# A three-part version number. +# +# @major: The major version number. +# +# @minor: The minor version number. +# +# @micro: The micro version number. +# +# Since: 2.4 +## +{ 'struct': 'VersionTriple', + 'data': {'major': 'int', 'minor': 'int', 'micro': 'int'} } + + +## +# @VersionInfo: +# +# A description of QEMU's version. +# +# @qemu: The version of QEMU. By current convention, a micro +# version of 50 signifies a development branch. A micro version +# greater than or equal to 90 signifies a release candidate for +# the next minor version. A micro version of less than 50 +# signifies a stable release. +# +# @package: QEMU will always set this field to an empty string. Downstream +# versions of QEMU should set this to a non-empty string. The +# exact format depends on the downstream however it highly +# recommended that a unique name is used. +# +# Since: 0.14.0 +## +{ 'struct': 'VersionInfo', + 'data': {'qemu': 'VersionTriple', 'package': 'str'} } + +## +# @query-version: +# +# Returns the current version of QEMU. +# +# Returns: A @VersionInfo object describing the current version of QEMU. +# +# Since: 0.14.0 +# +# Example: +# +# -> { "execute": "query-version" } +# <- { +# "return":{ +# "qemu":{ +# "major":0, +# "minor":11, +# "micro":5 +# }, +# "package":"" +# } +# } +# +## +{ 'command': 'query-version', 'returns': 'VersionInfo' } + +## +# @CommandInfo: +# +# Information about a QMP command +# +# @name: The command name +# +# Since: 0.14.0 +## +{ 'struct': 'CommandInfo', 'data': {'name': 'str'} } + +## +# @query-commands: +# +# Return a list of supported QMP commands by this server +# +# Returns: A list of @CommandInfo for all supported commands +# +# Since: 0.14.0 +# +# Example: +# +# -> { "execute": "query-commands" } +# <- { +# "return":[ +# { +# "name":"query-balloon" +# }, +# { +# "name":"system_powerdown" +# } +# ] +# } +# +# Note: This example has been shortened as the real response is too long. +# +## +{ 'command': 'query-commands', 'returns': ['CommandInfo'] } + +## +# @LostTickPolicy: +# +# Policy for handling lost ticks in timer devices. +# +# @discard: throw away the missed tick(s) and continue with future injection +# normally. Guest time may be delayed, unless the OS has explicit +# handling of lost ticks +# +# @delay: continue to deliver ticks at the normal rate. Guest time will be +# delayed due to the late tick +# +# @merge: merge the missed tick(s) into one tick and inject. Guest time +# may be delayed, depending on how the OS reacts to the merging +# of ticks +# +# @slew: deliver ticks at a higher rate to catch up with the missed tick. The +# guest time should not be delayed once catchup is complete. +# +# Since: 2.0 +## +{ 'enum': 'LostTickPolicy', + 'data': ['discard', 'delay', 'merge', 'slew' ] } + +## +# @add_client: +# +# Allow client connections for VNC, Spice and socket based +# character devices to be passed in to QEMU via SCM_RIGHTS. +# +# @protocol: protocol name. Valid names are "vnc", "spice" or the +# name of a character device (eg. from -chardev id=XXXX) +# +# @fdname: file descriptor name previously passed via 'getfd' command +# +# @skipauth: whether to skip authentication. Only applies +# to "vnc" and "spice" protocols +# +# @tls: whether to perform TLS. Only applies to the "spice" +# protocol +# +# Returns: nothing on success. +# +# Since: 0.14.0 +# +# Example: +# +# -> { "execute": "add_client", "arguments": { "protocol": "vnc", +# "fdname": "myclient" } } +# <- { "return": {} } +# +## +{ 'command': 'add_client', + 'data': { 'protocol': 'str', 'fdname': 'str', '*skipauth': 'bool', + '*tls': 'bool' } } + +## +# @NameInfo: +# +# Guest name information. +# +# @name: The name of the guest +# +# Since: 0.14.0 +## +{ 'struct': 'NameInfo', 'data': {'*name': 'str'} } + +## +# @query-name: +# +# Return the name information of a guest. +# +# Returns: @NameInfo of the guest +# +# Since: 0.14.0 +# +# Example: +# +# -> { "execute": "query-name" } +# <- { "return": { "name": "qemu-name" } } +# +## +{ 'command': 'query-name', 'returns': 'NameInfo' } + +## +# @KvmInfo: +# +# Information about support for KVM acceleration +# +# @enabled: true if KVM acceleration is active +# +# @present: true if KVM acceleration is built into this executable +# +# Since: 0.14.0 +## +{ 'struct': 'KvmInfo', 'data': {'enabled': 'bool', 'present': 'bool'} } + +## +# @query-kvm: +# +# Returns information about KVM acceleration +# +# Returns: @KvmInfo +# +# Since: 0.14.0 +# +# Example: +# +# -> { "execute": "query-kvm" } +# <- { "return": { "enabled": true, "present": true } } +# +## +{ 'command': 'query-kvm', 'returns': 'KvmInfo' } + +## +# @UuidInfo: +# +# Guest UUID information (Universally Unique Identifier). +# +# @UUID: the UUID of the guest +# +# Since: 0.14.0 +# +# Notes: If no UUID was specified for the guest, a null UUID is returned. +## +{ 'struct': 'UuidInfo', 'data': {'UUID': 'str'} } + +## +# @query-uuid: +# +# Query the guest UUID information. +# +# Returns: The @UuidInfo for the guest +# +# Since: 0.14.0 +# +# Example: +# +# -> { "execute": "query-uuid" } +# <- { "return": { "UUID": "550e8400-e29b-41d4-a716-446655440000" } } +# +## +{ 'command': 'query-uuid', 'returns': 'UuidInfo' } + +## +# @EventInfo: +# +# Information about a QMP event +# +# @name: The event name +# +# Since: 1.2.0 +## +{ 'struct': 'EventInfo', 'data': {'name': 'str'} } + +## +# @query-events: +# +# Return a list of supported QMP events by this server +# +# Returns: A list of @EventInfo for all supported events +# +# Since: 1.2.0 +# +# Example: +# +# -> { "execute": "query-events" } +# <- { +# "return": [ +# { +# "name":"SHUTDOWN" +# }, +# { +# "name":"RESET" +# } +# ] +# } +# +# Note: This example has been shortened as the real response is too long. +# +## +{ 'command': 'query-events', 'returns': ['EventInfo'] } + +## +# @CpuInfoArch: +# +# An enumeration of cpu types that enable additional information during +# @query-cpus and @query-cpus-fast. +# +# @s390: since 2.12 +# +# Since: 2.6 +## +{ 'enum': 'CpuInfoArch', + 'data': ['x86', 'sparc', 'ppc', 'mips', 'tricore', 's390', 'other' ] } + +## +# @CpuInfo: +# +# Information about a virtual CPU +# +# @CPU: the index of the virtual CPU +# +# @current: this only exists for backwards compatibility and should be ignored +# +# @halted: true if the virtual CPU is in the halt state. Halt usually refers +# to a processor specific low power mode. +# +# @qom_path: path to the CPU object in the QOM tree (since 2.4) +# +# @thread_id: ID of the underlying host thread +# +# @props: properties describing to which node/socket/core/thread +# virtual CPU belongs to, provided if supported by board (since 2.10) +# +# @arch: architecture of the cpu, which determines which additional fields +# will be listed (since 2.6) +# +# Since: 0.14.0 +# +# Notes: @halted is a transient state that changes frequently. By the time the +# data is sent to the client, the guest may no longer be halted. +## +{ 'union': 'CpuInfo', + 'base': {'CPU': 'int', 'current': 'bool', 'halted': 'bool', + 'qom_path': 'str', 'thread_id': 'int', + '*props': 'CpuInstanceProperties', 'arch': 'CpuInfoArch' }, + 'discriminator': 'arch', + 'data': { 'x86': 'CpuInfoX86', + 'sparc': 'CpuInfoSPARC', + 'ppc': 'CpuInfoPPC', + 'mips': 'CpuInfoMIPS', + 'tricore': 'CpuInfoTricore', + 's390': 'CpuInfoS390', + 'other': 'CpuInfoOther' } } + +## +# @CpuInfoX86: +# +# Additional information about a virtual i386 or x86_64 CPU +# +# @pc: the 64-bit instruction pointer +# +# Since: 2.6 +## +{ 'struct': 'CpuInfoX86', 'data': { 'pc': 'int' } } + +## +# @CpuInfoSPARC: +# +# Additional information about a virtual SPARC CPU +# +# @pc: the PC component of the instruction pointer +# +# @npc: the NPC component of the instruction pointer +# +# Since: 2.6 +## +{ 'struct': 'CpuInfoSPARC', 'data': { 'pc': 'int', 'npc': 'int' } } + +## +# @CpuInfoPPC: +# +# Additional information about a virtual PPC CPU +# +# @nip: the instruction pointer +# +# Since: 2.6 +## +{ 'struct': 'CpuInfoPPC', 'data': { 'nip': 'int' } } + +## +# @CpuInfoMIPS: +# +# Additional information about a virtual MIPS CPU +# +# @PC: the instruction pointer +# +# Since: 2.6 +## +{ 'struct': 'CpuInfoMIPS', 'data': { 'PC': 'int' } } + +## +# @CpuInfoTricore: +# +# Additional information about a virtual Tricore CPU +# +# @PC: the instruction pointer +# +# Since: 2.6 +## +{ 'struct': 'CpuInfoTricore', 'data': { 'PC': 'int' } } + +## +# @CpuInfoOther: +# +# No additional information is available about the virtual CPU +# +# Since: 2.6 +# +## +{ 'struct': 'CpuInfoOther', 'data': { } } + +## +# @CpuS390State: +# +# An enumeration of cpu states that can be assumed by a virtual +# S390 CPU +# +# Since: 2.12 +## +{ 'enum': 'CpuS390State', + 'prefix': 'S390_CPU_STATE', + 'data': [ 'uninitialized', 'stopped', 'check-stop', 'operating', 'load' ] } + +## +# @CpuInfoS390: +# +# Additional information about a virtual S390 CPU +# +# @cpu-state: the virtual CPU's state +# +# Since: 2.12 +## +{ 'struct': 'CpuInfoS390', 'data': { 'cpu-state': 'CpuS390State' } } + +## +# @query-cpus: +# +# Returns a list of information about each virtual CPU. +# +# This command causes vCPU threads to exit to userspace, which causes +# a small interruption to guest CPU execution. This will have a negative +# impact on realtime guests and other latency sensitive guest workloads. +# It is recommended to use @query-cpus-fast instead of this command to +# avoid the vCPU interruption. +# +# Returns: a list of @CpuInfo for each virtual CPU +# +# Since: 0.14.0 +# +# Example: +# +# -> { "execute": "query-cpus" } +# <- { "return": [ +# { +# "CPU":0, +# "current":true, +# "halted":false, +# "qom_path":"/machine/unattached/device[0]", +# "arch":"x86", +# "pc":3227107138, +# "thread_id":3134 +# }, +# { +# "CPU":1, +# "current":false, +# "halted":true, +# "qom_path":"/machine/unattached/device[2]", +# "arch":"x86", +# "pc":7108165, +# "thread_id":3135 +# } +# ] +# } +# +# Notes: This interface is deprecated (since 2.12.0), and it is strongly +# recommended that you avoid using it. Use @query-cpus-fast to +# obtain information about virtual CPUs. +# +## +{ 'command': 'query-cpus', 'returns': ['CpuInfo'] } + +## +# @CpuInfoFast: +# +# Information about a virtual CPU +# +# @cpu-index: index of the virtual CPU +# +# @qom-path: path to the CPU object in the QOM tree +# +# @thread-id: ID of the underlying host thread +# +# @props: properties describing to which node/socket/core/thread +# virtual CPU belongs to, provided if supported by board +# +# @arch: architecture of the cpu, which determines which additional fields +# will be listed +# +# Since: 2.12 +# +## +{ 'union': 'CpuInfoFast', + 'base': {'cpu-index': 'int', 'qom-path': 'str', + 'thread-id': 'int', '*props': 'CpuInstanceProperties', + 'arch': 'CpuInfoArch' }, + 'discriminator': 'arch', + 'data': { 'x86': 'CpuInfoOther', + 'sparc': 'CpuInfoOther', + 'ppc': 'CpuInfoOther', + 'mips': 'CpuInfoOther', + 'tricore': 'CpuInfoOther', + 's390': 'CpuInfoS390', + 'other': 'CpuInfoOther' } } + +## +# @query-cpus-fast: +# +# Returns information about all virtual CPUs. This command does not +# incur a performance penalty and should be used in production +# instead of query-cpus. +# +# Returns: list of @CpuInfoFast +# +# Since: 2.12 +# +# Example: +# +# -> { "execute": "query-cpus-fast" } +# <- { "return": [ +# { +# "thread-id": 25627, +# "props": { +# "core-id": 0, +# "thread-id": 0, +# "socket-id": 0 +# }, +# "qom-path": "/machine/unattached/device[0]", +# "arch":"x86", +# "cpu-index": 0 +# }, +# { +# "thread-id": 25628, +# "props": { +# "core-id": 0, +# "thread-id": 0, +# "socket-id": 1 +# }, +# "qom-path": "/machine/unattached/device[2]", +# "arch":"x86", +# "cpu-index": 1 +# } +# ] +# } +## +{ 'command': 'query-cpus-fast', 'returns': [ 'CpuInfoFast' ] } + +## +# @IOThreadInfo: +# +# Information about an iothread +# +# @id: the identifier of the iothread +# +# @thread-id: ID of the underlying host thread +# +# @poll-max-ns: maximum polling time in ns, 0 means polling is disabled +# (since 2.9) +# +# @poll-grow: how many ns will be added to polling time, 0 means that it's not +# configured (since 2.9) +# +# @poll-shrink: how many ns will be removed from polling time, 0 means that +# it's not configured (since 2.9) +# +# Since: 2.0 +## +{ 'struct': 'IOThreadInfo', + 'data': {'id': 'str', + 'thread-id': 'int', + 'poll-max-ns': 'int', + 'poll-grow': 'int', + 'poll-shrink': 'int' } } + +## +# @query-iothreads: +# +# Returns a list of information about each iothread. +# +# Note: this list excludes the QEMU main loop thread, which is not declared +# using the -object iothread command-line option. It is always the main thread +# of the process. +# +# Returns: a list of @IOThreadInfo for each iothread +# +# Since: 2.0 +# +# Example: +# +# -> { "execute": "query-iothreads" } +# <- { "return": [ +# { +# "id":"iothread0", +# "thread-id":3134 +# }, +# { +# "id":"iothread1", +# "thread-id":3135 +# } +# ] +# } +# +## +{ 'command': 'query-iothreads', 'returns': ['IOThreadInfo'] } + +## +# @BalloonInfo: +# +# Information about the guest balloon device. +# +# @actual: the number of bytes the balloon currently contains +# +# Since: 0.14.0 +# +## +{ 'struct': 'BalloonInfo', 'data': {'actual': 'int' } } + +## +# @query-balloon: +# +# Return information about the balloon device. +# +# Returns: @BalloonInfo on success +# +# If the balloon driver is enabled but not functional because the KVM +# kernel module cannot support it, KvmMissingCap +# +# If no balloon device is present, DeviceNotActive +# +# Since: 0.14.0 +# +# Example: +# +# -> { "execute": "query-balloon" } +# <- { "return": { +# "actual": 1073741824, +# } +# } +# +## +{ 'command': 'query-balloon', 'returns': 'BalloonInfo' } + +## +# @BALLOON_CHANGE: +# +# Emitted when the guest changes the actual BALLOON level. This value is +# equivalent to the @actual field return by the 'query-balloon' command +# +# @actual: actual level of the guest memory balloon in bytes +# +# Note: this event is rate-limited. +# +# Since: 1.2 +# +# Example: +# +# <- { "event": "BALLOON_CHANGE", +# "data": { "actual": 944766976 }, +# "timestamp": { "seconds": 1267020223, "microseconds": 435656 } } +# +## +{ 'event': 'BALLOON_CHANGE', + 'data': { 'actual': 'int' } } + +## +# @PciMemoryRange: +# +# A PCI device memory region +# +# @base: the starting address (guest physical) +# +# @limit: the ending address (guest physical) +# +# Since: 0.14.0 +## +{ 'struct': 'PciMemoryRange', 'data': {'base': 'int', 'limit': 'int'} } + +## +# @PciMemoryRegion: +# +# Information about a PCI device I/O region. +# +# @bar: the index of the Base Address Register for this region +# +# @type: 'io' if the region is a PIO region +# 'memory' if the region is a MMIO region +# +# @size: memory size +# +# @prefetch: if @type is 'memory', true if the memory is prefetchable +# +# @mem_type_64: if @type is 'memory', true if the BAR is 64-bit +# +# Since: 0.14.0 +## +{ 'struct': 'PciMemoryRegion', + 'data': {'bar': 'int', 'type': 'str', 'address': 'int', 'size': 'int', + '*prefetch': 'bool', '*mem_type_64': 'bool' } } + +## +# @PciBusInfo: +# +# Information about a bus of a PCI Bridge device +# +# @number: primary bus interface number. This should be the number of the +# bus the device resides on. +# +# @secondary: secondary bus interface number. This is the number of the +# main bus for the bridge +# +# @subordinate: This is the highest number bus that resides below the +# bridge. +# +# @io_range: The PIO range for all devices on this bridge +# +# @memory_range: The MMIO range for all devices on this bridge +# +# @prefetchable_range: The range of prefetchable MMIO for all devices on +# this bridge +# +# Since: 2.4 +## +{ 'struct': 'PciBusInfo', + 'data': {'number': 'int', 'secondary': 'int', 'subordinate': 'int', + 'io_range': 'PciMemoryRange', + 'memory_range': 'PciMemoryRange', + 'prefetchable_range': 'PciMemoryRange' } } + +## +# @PciBridgeInfo: +# +# Information about a PCI Bridge device +# +# @bus: information about the bus the device resides on +# +# @devices: a list of @PciDeviceInfo for each device on this bridge +# +# Since: 0.14.0 +## +{ 'struct': 'PciBridgeInfo', + 'data': {'bus': 'PciBusInfo', '*devices': ['PciDeviceInfo']} } + +## +# @PciDeviceClass: +# +# Information about the Class of a PCI device +# +# @desc: a string description of the device's class +# +# @class: the class code of the device +# +# Since: 2.4 +## +{ 'struct': 'PciDeviceClass', + 'data': {'*desc': 'str', 'class': 'int'} } + +## +# @PciDeviceId: +# +# Information about the Id of a PCI device +# +# @device: the PCI device id +# +# @vendor: the PCI vendor id +# +# Since: 2.4 +## +{ 'struct': 'PciDeviceId', + 'data': {'device': 'int', 'vendor': 'int'} } + +## +# @PciDeviceInfo: +# +# Information about a PCI device +# +# @bus: the bus number of the device +# +# @slot: the slot the device is located in +# +# @function: the function of the slot used by the device +# +# @class_info: the class of the device +# +# @id: the PCI device id +# +# @irq: if an IRQ is assigned to the device, the IRQ number +# +# @qdev_id: the device name of the PCI device +# +# @pci_bridge: if the device is a PCI bridge, the bridge information +# +# @regions: a list of the PCI I/O regions associated with the device +# +# Notes: the contents of @class_info.desc are not stable and should only be +# treated as informational. +# +# Since: 0.14.0 +## +{ 'struct': 'PciDeviceInfo', + 'data': {'bus': 'int', 'slot': 'int', 'function': 'int', + 'class_info': 'PciDeviceClass', 'id': 'PciDeviceId', + '*irq': 'int', 'qdev_id': 'str', '*pci_bridge': 'PciBridgeInfo', + 'regions': ['PciMemoryRegion']} } + +## +# @PciInfo: +# +# Information about a PCI bus +# +# @bus: the bus index +# +# @devices: a list of devices on this bus +# +# Since: 0.14.0 +## +{ 'struct': 'PciInfo', 'data': {'bus': 'int', 'devices': ['PciDeviceInfo']} } + +## +# @query-pci: +# +# Return information about the PCI bus topology of the guest. +# +# Returns: a list of @PciInfo for each PCI bus. Each bus is +# represented by a json-object, which has a key with a json-array of +# all PCI devices attached to it. Each device is represented by a +# json-object. +# +# Since: 0.14.0 +# +# Example: +# +# -> { "execute": "query-pci" } +# <- { "return": [ +# { +# "bus": 0, +# "devices": [ +# { +# "bus": 0, +# "qdev_id": "", +# "slot": 0, +# "class_info": { +# "class": 1536, +# "desc": "Host bridge" +# }, +# "id": { +# "device": 32902, +# "vendor": 4663 +# }, +# "function": 0, +# "regions": [ +# ] +# }, +# { +# "bus": 0, +# "qdev_id": "", +# "slot": 1, +# "class_info": { +# "class": 1537, +# "desc": "ISA bridge" +# }, +# "id": { +# "device": 32902, +# "vendor": 28672 +# }, +# "function": 0, +# "regions": [ +# ] +# }, +# { +# "bus": 0, +# "qdev_id": "", +# "slot": 1, +# "class_info": { +# "class": 257, +# "desc": "IDE controller" +# }, +# "id": { +# "device": 32902, +# "vendor": 28688 +# }, +# "function": 1, +# "regions": [ +# { +# "bar": 4, +# "size": 16, +# "address": 49152, +# "type": "io" +# } +# ] +# }, +# { +# "bus": 0, +# "qdev_id": "", +# "slot": 2, +# "class_info": { +# "class": 768, +# "desc": "VGA controller" +# }, +# "id": { +# "device": 4115, +# "vendor": 184 +# }, +# "function": 0, +# "regions": [ +# { +# "prefetch": true, +# "mem_type_64": false, +# "bar": 0, +# "size": 33554432, +# "address": 4026531840, +# "type": "memory" +# }, +# { +# "prefetch": false, +# "mem_type_64": false, +# "bar": 1, +# "size": 4096, +# "address": 4060086272, +# "type": "memory" +# }, +# { +# "prefetch": false, +# "mem_type_64": false, +# "bar": 6, +# "size": 65536, +# "address": -1, +# "type": "memory" +# } +# ] +# }, +# { +# "bus": 0, +# "qdev_id": "", +# "irq": 11, +# "slot": 4, +# "class_info": { +# "class": 1280, +# "desc": "RAM controller" +# }, +# "id": { +# "device": 6900, +# "vendor": 4098 +# }, +# "function": 0, +# "regions": [ +# { +# "bar": 0, +# "size": 32, +# "address": 49280, +# "type": "io" +# } +# ] +# } +# ] +# } +# ] +# } +# +# Note: This example has been shortened as the real response is too long. +# +## +{ 'command': 'query-pci', 'returns': ['PciInfo'] } + +## +# @quit: +# +# This command will cause the QEMU process to exit gracefully. While every +# attempt is made to send the QMP response before terminating, this is not +# guaranteed. When using this interface, a premature EOF would not be +# unexpected. +# +# Since: 0.14.0 +# +# Example: +# +# -> { "execute": "quit" } +# <- { "return": {} } +## +{ 'command': 'quit' } + +## +# @stop: +# +# Stop all guest VCPU execution. +# +# Since: 0.14.0 +# +# Notes: This function will succeed even if the guest is already in the stopped +# state. In "inmigrate" state, it will ensure that the guest +# remains paused once migration finishes, as if the -S option was +# passed on the command line. +# +# Example: +# +# -> { "execute": "stop" } +# <- { "return": {} } +# +## +{ 'command': 'stop' } + +## +# @system_reset: +# +# Performs a hard reset of a guest. +# +# Since: 0.14.0 +# +# Example: +# +# -> { "execute": "system_reset" } +# <- { "return": {} } +# +## +{ 'command': 'system_reset' } + +## +# @system_powerdown: +# +# Requests that a guest perform a powerdown operation. +# +# Since: 0.14.0 +# +# Notes: A guest may or may not respond to this command. This command +# returning does not indicate that a guest has accepted the request or +# that it has shut down. Many guests will respond to this command by +# prompting the user in some way. +# Example: +# +# -> { "execute": "system_powerdown" } +# <- { "return": {} } +# +## +{ 'command': 'system_powerdown' } + +## +# @cpu-add: +# +# Adds CPU with specified ID +# +# @id: ID of CPU to be created, valid values [0..max_cpus) +# +# Returns: Nothing on success +# +# Since: 1.5 +# +# Example: +# +# -> { "execute": "cpu-add", "arguments": { "id": 2 } } +# <- { "return": {} } +# +## +{ 'command': 'cpu-add', 'data': {'id': 'int'} } + +## +# @memsave: +# +# Save a portion of guest memory to a file. +# +# @val: the virtual address of the guest to start from +# +# @size: the size of memory region to save +# +# @filename: the file to save the memory to as binary data +# +# @cpu-index: the index of the virtual CPU to use for translating the +# virtual address (defaults to CPU 0) +# +# Returns: Nothing on success +# +# Since: 0.14.0 +# +# Notes: Errors were not reliably returned until 1.1 +# +# Example: +# +# -> { "execute": "memsave", +# "arguments": { "val": 10, +# "size": 100, +# "filename": "/tmp/virtual-mem-dump" } } +# <- { "return": {} } +# +## +{ 'command': 'memsave', + 'data': {'val': 'int', 'size': 'int', 'filename': 'str', '*cpu-index': 'int'} } + +## +# @pmemsave: +# +# Save a portion of guest physical memory to a file. +# +# @val: the physical address of the guest to start from +# +# @size: the size of memory region to save +# +# @filename: the file to save the memory to as binary data +# +# Returns: Nothing on success +# +# Since: 0.14.0 +# +# Notes: Errors were not reliably returned until 1.1 +# +# Example: +# +# -> { "execute": "pmemsave", +# "arguments": { "val": 10, +# "size": 100, +# "filename": "/tmp/physical-mem-dump" } } +# <- { "return": {} } +# +## +{ 'command': 'pmemsave', + 'data': {'val': 'int', 'size': 'int', 'filename': 'str'} } + +## +# @cont: +# +# Resume guest VCPU execution. +# +# Since: 0.14.0 +# +# Returns: If successful, nothing +# +# Notes: This command will succeed if the guest is currently running. It +# will also succeed if the guest is in the "inmigrate" state; in +# this case, the effect of the command is to make sure the guest +# starts once migration finishes, removing the effect of the -S +# command line option if it was passed. +# +# Example: +# +# -> { "execute": "cont" } +# <- { "return": {} } +# +## +{ 'command': 'cont' } + +## +# @system_wakeup: +# +# Wakeup guest from suspend. Does nothing in case the guest isn't suspended. +# +# Since: 1.1 +# +# Returns: nothing. +# +# Example: +# +# -> { "execute": "system_wakeup" } +# <- { "return": {} } +# +## +{ 'command': 'system_wakeup' } + +## +# @inject-nmi: +# +# Injects a Non-Maskable Interrupt into the default CPU (x86/s390) or all CPUs (ppc64). +# The command fails when the guest doesn't support injecting. +# +# Returns: If successful, nothing +# +# Since: 0.14.0 +# +# Note: prior to 2.1, this command was only supported for x86 and s390 VMs +# +# Example: +# +# -> { "execute": "inject-nmi" } +# <- { "return": {} } +# +## +{ 'command': 'inject-nmi' } + +## +# @balloon: +# +# Request the balloon driver to change its balloon size. +# +# @value: the target size of the balloon in bytes +# +# Returns: Nothing on success +# If the balloon driver is enabled but not functional because the KVM +# kernel module cannot support it, KvmMissingCap +# If no balloon device is present, DeviceNotActive +# +# Notes: This command just issues a request to the guest. When it returns, +# the balloon size may not have changed. A guest can change the balloon +# size independent of this command. +# +# Since: 0.14.0 +# +# Example: +# +# -> { "execute": "balloon", "arguments": { "value": 536870912 } } +# <- { "return": {} } +# +## +{ 'command': 'balloon', 'data': {'value': 'int'} } + +## +# @human-monitor-command: +# +# Execute a command on the human monitor and return the output. +# +# @command-line: the command to execute in the human monitor +# +# @cpu-index: The CPU to use for commands that require an implicit CPU +# +# Returns: the output of the command as a string +# +# Since: 0.14.0 +# +# Notes: This command only exists as a stop-gap. Its use is highly +# discouraged. The semantics of this command are not +# guaranteed: this means that command names, arguments and +# responses can change or be removed at ANY time. Applications +# that rely on long term stability guarantees should NOT +# use this command. +# +# Known limitations: +# +# * This command is stateless, this means that commands that depend +# on state information (such as getfd) might not work +# +# * Commands that prompt the user for data don't currently work +# +# Example: +# +# -> { "execute": "human-monitor-command", +# "arguments": { "command-line": "info kvm" } } +# <- { "return": "kvm support: enabled\r\n" } +# +## +{ 'command': 'human-monitor-command', + 'data': {'command-line': 'str', '*cpu-index': 'int'}, + 'returns': 'str' } + +## +# @ObjectPropertyInfo: +# +# @name: the name of the property +# +# @type: the type of the property. This will typically come in one of four +# forms: +# +# 1) A primitive type such as 'u8', 'u16', 'bool', 'str', or 'double'. +# These types are mapped to the appropriate JSON type. +# +# 2) A child type in the form 'child<subtype>' where subtype is a qdev +# device type name. Child properties create the composition tree. +# +# 3) A link type in the form 'link<subtype>' where subtype is a qdev +# device type name. Link properties form the device model graph. +# +# Since: 1.2 +## +{ 'struct': 'ObjectPropertyInfo', + 'data': { 'name': 'str', 'type': 'str' } } + +## +# @qom-list: +# +# This command will list any properties of a object given a path in the object +# model. +# +# @path: the path within the object model. See @qom-get for a description of +# this parameter. +# +# Returns: a list of @ObjectPropertyInfo that describe the properties of the +# object. +# +# Since: 1.2 +## +{ 'command': 'qom-list', + 'data': { 'path': 'str' }, + 'returns': [ 'ObjectPropertyInfo' ] } + +## +# @qom-get: +# +# This command will get a property from a object model path and return the +# value. +# +# @path: The path within the object model. There are two forms of supported +# paths--absolute and partial paths. +# +# Absolute paths are derived from the root object and can follow child<> +# or link<> properties. Since they can follow link<> properties, they +# can be arbitrarily long. Absolute paths look like absolute filenames +# and are prefixed with a leading slash. +# +# Partial paths look like relative filenames. They do not begin +# with a prefix. The matching rules for partial paths are subtle but +# designed to make specifying objects easy. At each level of the +# composition tree, the partial path is matched as an absolute path. +# The first match is not returned. At least two matches are searched +# for. A successful result is only returned if only one match is +# found. If more than one match is found, a flag is return to +# indicate that the match was ambiguous. +# +# @property: The property name to read +# +# Returns: The property value. The type depends on the property +# type. child<> and link<> properties are returned as #str +# pathnames. All integer property types (u8, u16, etc) are +# returned as #int. +# +# Since: 1.2 +## +{ 'command': 'qom-get', + 'data': { 'path': 'str', 'property': 'str' }, + 'returns': 'any' } + +## +# @qom-set: +# +# This command will set a property from a object model path. +# +# @path: see @qom-get for a description of this parameter +# +# @property: the property name to set +# +# @value: a value who's type is appropriate for the property type. See @qom-get +# for a description of type mapping. +# +# Since: 1.2 +## +{ 'command': 'qom-set', + 'data': { 'path': 'str', 'property': 'str', 'value': 'any' } } + +## +# @change: +# +# This command is multiple commands multiplexed together. +# +# @device: This is normally the name of a block device but it may also be 'vnc'. +# when it's 'vnc', then sub command depends on @target +# +# @target: If @device is a block device, then this is the new filename. +# If @device is 'vnc', then if the value 'password' selects the vnc +# change password command. Otherwise, this specifies a new server URI +# address to listen to for VNC connections. +# +# @arg: If @device is a block device, then this is an optional format to open +# the device with. +# If @device is 'vnc' and @target is 'password', this is the new VNC +# password to set. See change-vnc-password for additional notes. +# +# Returns: Nothing on success. +# If @device is not a valid block device, DeviceNotFound +# +# Notes: This interface is deprecated, and it is strongly recommended that you +# avoid using it. For changing block devices, use +# blockdev-change-medium; for changing VNC parameters, use +# change-vnc-password. +# +# Since: 0.14.0 +# +# Example: +# +# 1. Change a removable medium +# +# -> { "execute": "change", +# "arguments": { "device": "ide1-cd0", +# "target": "/srv/images/Fedora-12-x86_64-DVD.iso" } } +# <- { "return": {} } +# +# 2. Change VNC password +# +# -> { "execute": "change", +# "arguments": { "device": "vnc", "target": "password", +# "arg": "foobar1" } } +# <- { "return": {} } +# +## +{ 'command': 'change', + 'data': {'device': 'str', 'target': 'str', '*arg': 'str'} } + +## +# @ObjectTypeInfo: +# +# This structure describes a search result from @qom-list-types +# +# @name: the type name found in the search +# +# @abstract: the type is abstract and can't be directly instantiated. +# Omitted if false. (since 2.10) +# +# @parent: Name of parent type, if any (since 2.10) +# +# Since: 1.1 +## +{ 'struct': 'ObjectTypeInfo', + 'data': { 'name': 'str', '*abstract': 'bool', '*parent': 'str' } } + +## +# @qom-list-types: +# +# This command will return a list of types given search parameters +# +# @implements: if specified, only return types that implement this type name +# +# @abstract: if true, include abstract types in the results +# +# Returns: a list of @ObjectTypeInfo or an empty list if no results are found +# +# Since: 1.1 +## +{ 'command': 'qom-list-types', + 'data': { '*implements': 'str', '*abstract': 'bool' }, + 'returns': [ 'ObjectTypeInfo' ] } + +## +# @DevicePropertyInfo: +# +# Information about device properties. +# +# @name: the name of the property +# @type: the typename of the property +# @description: if specified, the description of the property. +# (since 2.2) +# +# Since: 1.2 +## +{ 'struct': 'DevicePropertyInfo', + 'data': { 'name': 'str', 'type': 'str', '*description': 'str' } } + +## +# @device-list-properties: +# +# List properties associated with a device. +# +# @typename: the type name of a device +# +# Returns: a list of DevicePropertyInfo describing a devices properties +# +# Since: 1.2 +## +{ 'command': 'device-list-properties', + 'data': { 'typename': 'str'}, + 'returns': [ 'DevicePropertyInfo' ] } + +## +# @xen-set-global-dirty-log: +# +# Enable or disable the global dirty log mode. +# +# @enable: true to enable, false to disable. +# +# Returns: nothing +# +# Since: 1.3 +# +# Example: +# +# -> { "execute": "xen-set-global-dirty-log", +# "arguments": { "enable": true } } +# <- { "return": {} } +# +## +{ 'command': 'xen-set-global-dirty-log', 'data': { 'enable': 'bool' } } + +## +# @device_add: +# +# @driver: the name of the new device's driver +# +# @bus: the device's parent bus (device tree path) +# +# @id: the device's ID, must be unique +# +# Additional arguments depend on the type. +# +# Add a device. +# +# Notes: +# 1. For detailed information about this command, please refer to the +# 'docs/qdev-device-use.txt' file. +# +# 2. It's possible to list device properties by running QEMU with the +# "-device DEVICE,help" command-line argument, where DEVICE is the +# device's name +# +# Example: +# +# -> { "execute": "device_add", +# "arguments": { "driver": "e1000", "id": "net1", +# "bus": "pci.0", +# "mac": "52:54:00:12:34:56" } } +# <- { "return": {} } +# +# TODO: This command effectively bypasses QAPI completely due to its +# "additional arguments" business. It shouldn't have been added to +# the schema in this form. It should be qapified properly, or +# replaced by a properly qapified command. +# +# Since: 0.13 +## +{ 'command': 'device_add', + 'data': {'driver': 'str', '*bus': 'str', '*id': 'str'}, + 'gen': false } # so we can get the additional arguments + +## +# @device_del: +# +# Remove a device from a guest +# +# @id: the device's ID or QOM path +# +# Returns: Nothing on success +# If @id is not a valid device, DeviceNotFound +# +# Notes: When this command completes, the device may not be removed from the +# guest. Hot removal is an operation that requires guest cooperation. +# This command merely requests that the guest begin the hot removal +# process. Completion of the device removal process is signaled with a +# DEVICE_DELETED event. Guest reset will automatically complete removal +# for all devices. +# +# Since: 0.14.0 +# +# Example: +# +# -> { "execute": "device_del", +# "arguments": { "id": "net1" } } +# <- { "return": {} } +# +# -> { "execute": "device_del", +# "arguments": { "id": "/machine/peripheral-anon/device[0]" } } +# <- { "return": {} } +# +## +{ 'command': 'device_del', 'data': {'id': 'str'} } + +## +# @DEVICE_DELETED: +# +# Emitted whenever the device removal completion is acknowledged by the guest. +# At this point, it's safe to reuse the specified device ID. Device removal can +# be initiated by the guest or by HMP/QMP commands. +# +# @device: device name +# +# @path: device path +# +# Since: 1.5 +# +# Example: +# +# <- { "event": "DEVICE_DELETED", +# "data": { "device": "virtio-net-pci-0", +# "path": "/machine/peripheral/virtio-net-pci-0" }, +# "timestamp": { "seconds": 1265044230, "microseconds": 450486 } } +# +## +{ 'event': 'DEVICE_DELETED', + 'data': { '*device': 'str', 'path': 'str' } } + +## +# @DumpGuestMemoryFormat: +# +# An enumeration of guest-memory-dump's format. +# +# @elf: elf format +# +# @kdump-zlib: kdump-compressed format with zlib-compressed +# +# @kdump-lzo: kdump-compressed format with lzo-compressed +# +# @kdump-snappy: kdump-compressed format with snappy-compressed +# +# Since: 2.0 +## +{ 'enum': 'DumpGuestMemoryFormat', + 'data': [ 'elf', 'kdump-zlib', 'kdump-lzo', 'kdump-snappy' ] } + +## +# @dump-guest-memory: +# +# Dump guest's memory to vmcore. It is a synchronous operation that can take +# very long depending on the amount of guest memory. +# +# @paging: if true, do paging to get guest's memory mapping. This allows +# using gdb to process the core file. +# +# IMPORTANT: this option can make QEMU allocate several gigabytes +# of RAM. This can happen for a large guest, or a +# malicious guest pretending to be large. +# +# Also, paging=true has the following limitations: +# +# 1. The guest may be in a catastrophic state or can have corrupted +# memory, which cannot be trusted +# 2. The guest can be in real-mode even if paging is enabled. For +# example, the guest uses ACPI to sleep, and ACPI sleep state +# goes in real-mode +# 3. Currently only supported on i386 and x86_64. +# +# @protocol: the filename or file descriptor of the vmcore. The supported +# protocols are: +# +# 1. file: the protocol starts with "file:", and the following +# string is the file's path. +# 2. fd: the protocol starts with "fd:", and the following string +# is the fd's name. +# +# @detach: if true, QMP will return immediately rather than +# waiting for the dump to finish. The user can track progress +# using "query-dump". (since 2.6). +# +# @begin: if specified, the starting physical address. +# +# @length: if specified, the memory size, in bytes. If you don't +# want to dump all guest's memory, please specify the start @begin +# and @length +# +# @format: if specified, the format of guest memory dump. But non-elf +# format is conflict with paging and filter, ie. @paging, @begin and +# @length is not allowed to be specified with non-elf @format at the +# same time (since 2.0) +# +# Note: All boolean arguments default to false +# +# Returns: nothing on success +# +# Since: 1.2 +# +# Example: +# +# -> { "execute": "dump-guest-memory", +# "arguments": { "protocol": "fd:dump" } } +# <- { "return": {} } +# +## +{ 'command': 'dump-guest-memory', + 'data': { 'paging': 'bool', 'protocol': 'str', '*detach': 'bool', + '*begin': 'int', '*length': 'int', + '*format': 'DumpGuestMemoryFormat'} } + +## +# @DumpStatus: +# +# Describe the status of a long-running background guest memory dump. +# +# @none: no dump-guest-memory has started yet. +# +# @active: there is one dump running in background. +# +# @completed: the last dump has finished successfully. +# +# @failed: the last dump has failed. +# +# Since: 2.6 +## +{ 'enum': 'DumpStatus', + 'data': [ 'none', 'active', 'completed', 'failed' ] } + +## +# @DumpQueryResult: +# +# The result format for 'query-dump'. +# +# @status: enum of @DumpStatus, which shows current dump status +# +# @completed: bytes written in latest dump (uncompressed) +# +# @total: total bytes to be written in latest dump (uncompressed) +# +# Since: 2.6 +## +{ 'struct': 'DumpQueryResult', + 'data': { 'status': 'DumpStatus', + 'completed': 'int', + 'total': 'int' } } + +## +# @query-dump: +# +# Query latest dump status. +# +# Returns: A @DumpStatus object showing the dump status. +# +# Since: 2.6 +# +# Example: +# +# -> { "execute": "query-dump" } +# <- { "return": { "status": "active", "completed": 1024000, +# "total": 2048000 } } +# +## +{ 'command': 'query-dump', 'returns': 'DumpQueryResult' } + +## +# @DUMP_COMPLETED: +# +# Emitted when background dump has completed +# +# @result: DumpQueryResult type described in qapi-schema.json. +# +# @error: human-readable error string that provides +# hint on why dump failed. Only presents on failure. The +# user should not try to interpret the error string. +# +# Since: 2.6 +# +# Example: +# +# { "event": "DUMP_COMPLETED", +# "data": {"result": {"total": 1090650112, "status": "completed", +# "completed": 1090650112} } } +# +## +{ 'event': 'DUMP_COMPLETED' , + 'data': { 'result': 'DumpQueryResult', '*error': 'str' } } + +## +# @DumpGuestMemoryCapability: +# +# A list of the available formats for dump-guest-memory +# +# Since: 2.0 +## +{ 'struct': 'DumpGuestMemoryCapability', + 'data': { + 'formats': ['DumpGuestMemoryFormat'] } } + +## +# @query-dump-guest-memory-capability: +# +# Returns the available formats for dump-guest-memory +# +# Returns: A @DumpGuestMemoryCapability object listing available formats for +# dump-guest-memory +# +# Since: 2.0 +# +# Example: +# +# -> { "execute": "query-dump-guest-memory-capability" } +# <- { "return": { "formats": +# ["elf", "kdump-zlib", "kdump-lzo", "kdump-snappy"] } +# +## +{ 'command': 'query-dump-guest-memory-capability', + 'returns': 'DumpGuestMemoryCapability' } + +## +# @dump-skeys: +# +# Dump guest's storage keys +# +# @filename: the path to the file to dump to +# +# This command is only supported on s390 architecture. +# +# Since: 2.5 +# +# Example: +# +# -> { "execute": "dump-skeys", +# "arguments": { "filename": "/tmp/skeys" } } +# <- { "return": {} } +# +## +{ 'command': 'dump-skeys', + 'data': { 'filename': 'str' } } + +## +# @object-add: +# +# Create a QOM object. +# +# @qom-type: the class name for the object to be created +# +# @id: the name of the new object +# +# @props: a dictionary of properties to be passed to the backend +# +# Returns: Nothing on success +# Error if @qom-type is not a valid class name +# +# Since: 2.0 +# +# Example: +# +# -> { "execute": "object-add", +# "arguments": { "qom-type": "rng-random", "id": "rng1", +# "props": { "filename": "/dev/hwrng" } } } +# <- { "return": {} } +# +## +{ 'command': 'object-add', + 'data': {'qom-type': 'str', 'id': 'str', '*props': 'any'} } + +## +# @object-del: +# +# Remove a QOM object. +# +# @id: the name of the QOM object to remove +# +# Returns: Nothing on success +# Error if @id is not a valid id for a QOM object +# +# Since: 2.0 +# +# Example: +# +# -> { "execute": "object-del", "arguments": { "id": "rng1" } } +# <- { "return": {} } +# +## +{ 'command': 'object-del', 'data': {'id': 'str'} } + +## +# @getfd: +# +# Receive a file descriptor via SCM rights and assign it a name +# +# @fdname: file descriptor name +# +# Returns: Nothing on success +# +# Since: 0.14.0 +# +# Notes: If @fdname already exists, the file descriptor assigned to +# it will be closed and replaced by the received file +# descriptor. +# +# The 'closefd' command can be used to explicitly close the +# file descriptor when it is no longer needed. +# +# Example: +# +# -> { "execute": "getfd", "arguments": { "fdname": "fd1" } } +# <- { "return": {} } +# +## +{ 'command': 'getfd', 'data': {'fdname': 'str'} } + +## +# @closefd: +# +# Close a file descriptor previously passed via SCM rights +# +# @fdname: file descriptor name +# +# Returns: Nothing on success +# +# Since: 0.14.0 +# +# Example: +# +# -> { "execute": "closefd", "arguments": { "fdname": "fd1" } } +# <- { "return": {} } +# +## +{ 'command': 'closefd', 'data': {'fdname': 'str'} } + +## +# @MachineInfo: +# +# Information describing a machine. +# +# @name: the name of the machine +# +# @alias: an alias for the machine name +# +# @is-default: whether the machine is default +# +# @cpu-max: maximum number of CPUs supported by the machine type +# (since 1.5.0) +# +# @hotpluggable-cpus: cpu hotplug via -device is supported (since 2.7.0) +# +# Since: 1.2.0 +## +{ 'struct': 'MachineInfo', + 'data': { 'name': 'str', '*alias': 'str', + '*is-default': 'bool', 'cpu-max': 'int', + 'hotpluggable-cpus': 'bool'} } + +## +# @query-machines: +# +# Return a list of supported machines +# +# Returns: a list of MachineInfo +# +# Since: 1.2.0 +## +{ 'command': 'query-machines', 'returns': ['MachineInfo'] } + +## +# @CpuDefinitionInfo: +# +# Virtual CPU definition. +# +# @name: the name of the CPU definition +# +# @migration-safe: whether a CPU definition can be safely used for +# migration in combination with a QEMU compatibility machine +# when migrating between different QMU versions and between +# hosts with different sets of (hardware or software) +# capabilities. If not provided, information is not available +# and callers should not assume the CPU definition to be +# migration-safe. (since 2.8) +# +# @static: whether a CPU definition is static and will not change depending on +# QEMU version, machine type, machine options and accelerator options. +# A static model is always migration-safe. (since 2.8) +# +# @unavailable-features: List of properties that prevent +# the CPU model from running in the current +# host. (since 2.8) +# @typename: Type name that can be used as argument to @device-list-properties, +# to introspect properties configurable using -cpu or -global. +# (since 2.9) +# +# @unavailable-features is a list of QOM property names that +# represent CPU model attributes that prevent the CPU from running. +# If the QOM property is read-only, that means there's no known +# way to make the CPU model run in the current host. Implementations +# that choose not to provide specific information return the +# property name "type". +# If the property is read-write, it means that it MAY be possible +# to run the CPU model in the current host if that property is +# changed. Management software can use it as hints to suggest or +# choose an alternative for the user, or just to generate meaningful +# error messages explaining why the CPU model can't be used. +# If @unavailable-features is an empty list, the CPU model is +# runnable using the current host and machine-type. +# If @unavailable-features is not present, runnability +# information for the CPU is not available. +# +# Since: 1.2.0 +## +{ 'struct': 'CpuDefinitionInfo', + 'data': { 'name': 'str', '*migration-safe': 'bool', 'static': 'bool', + '*unavailable-features': [ 'str' ], 'typename': 'str' } } + +## +# @MemoryInfo: +# +# Actual memory information in bytes. +# +# @base-memory: size of "base" memory specified with command line +# option -m. +# +# @plugged-memory: size of memory that can be hot-unplugged. This field +# is omitted if target doesn't support memory hotplug +# (i.e. CONFIG_MEM_HOTPLUG not defined on build time). +# +# Since: 2.11.0 +## +{ 'struct': 'MemoryInfo', + 'data' : { 'base-memory': 'size', '*plugged-memory': 'size' } } + +## +# @query-memory-size-summary: +# +# Return the amount of initially allocated and present hotpluggable (if +# enabled) memory in bytes. +# +# Example: +# +# -> { "execute": "query-memory-size-summary" } +# <- { "return": { "base-memory": 4294967296, "plugged-memory": 0 } } +# +# Since: 2.11.0 +## +{ 'command': 'query-memory-size-summary', 'returns': 'MemoryInfo' } + +## +# @query-cpu-definitions: +# +# Return a list of supported virtual CPU definitions +# +# Returns: a list of CpuDefInfo +# +# Since: 1.2.0 +## +{ 'command': 'query-cpu-definitions', 'returns': ['CpuDefinitionInfo'] } + +## +# @CpuModelInfo: +# +# Virtual CPU model. +# +# A CPU model consists of the name of a CPU definition, to which +# delta changes are applied (e.g. features added/removed). Most magic values +# that an architecture might require should be hidden behind the name. +# However, if required, architectures can expose relevant properties. +# +# @name: the name of the CPU definition the model is based on +# @props: a dictionary of QOM properties to be applied +# +# Since: 2.8.0 +## +{ 'struct': 'CpuModelInfo', + 'data': { 'name': 'str', + '*props': 'any' } } + +## +# @CpuModelExpansionType: +# +# An enumeration of CPU model expansion types. +# +# @static: Expand to a static CPU model, a combination of a static base +# model name and property delta changes. As the static base model will +# never change, the expanded CPU model will be the same, independent of +# independent of QEMU version, machine type, machine options, and +# accelerator options. Therefore, the resulting model can be used by +# tooling without having to specify a compatibility machine - e.g. when +# displaying the "host" model. static CPU models are migration-safe. +# +# @full: Expand all properties. The produced model is not guaranteed to be +# migration-safe, but allows tooling to get an insight and work with +# model details. +# +# Note: When a non-migration-safe CPU model is expanded in static mode, some +# features enabled by the CPU model may be omitted, because they can't be +# implemented by a static CPU model definition (e.g. cache info passthrough and +# PMU passthrough in x86). If you need an accurate representation of the +# features enabled by a non-migration-safe CPU model, use @full. If you need a +# static representation that will keep ABI compatibility even when changing QEMU +# version or machine-type, use @static (but keep in mind that some features may +# be omitted). +# +# Since: 2.8.0 +## +{ 'enum': 'CpuModelExpansionType', + 'data': [ 'static', 'full' ] } + + +## +# @CpuModelExpansionInfo: +# +# The result of a cpu model expansion. +# +# @model: the expanded CpuModelInfo. +# +# Since: 2.8.0 +## +{ 'struct': 'CpuModelExpansionInfo', + 'data': { 'model': 'CpuModelInfo' } } + + +## +# @query-cpu-model-expansion: +# +# Expands a given CPU model (or a combination of CPU model + additional options) +# to different granularities, allowing tooling to get an understanding what a +# specific CPU model looks like in QEMU under a certain configuration. +# +# This interface can be used to query the "host" CPU model. +# +# The data returned by this command may be affected by: +# +# * QEMU version: CPU models may look different depending on the QEMU version. +# (Except for CPU models reported as "static" in query-cpu-definitions.) +# * machine-type: CPU model may look different depending on the machine-type. +# (Except for CPU models reported as "static" in query-cpu-definitions.) +# * machine options (including accelerator): in some architectures, CPU models +# may look different depending on machine and accelerator options. (Except for +# CPU models reported as "static" in query-cpu-definitions.) +# * "-cpu" arguments and global properties: arguments to the -cpu option and +# global properties may affect expansion of CPU models. Using +# query-cpu-model-expansion while using these is not advised. +# +# Some architectures may not support all expansion types. s390x supports +# "full" and "static". +# +# Returns: a CpuModelExpansionInfo. Returns an error if expanding CPU models is +# not supported, if the model cannot be expanded, if the model contains +# an unknown CPU definition name, unknown properties or properties +# with a wrong type. Also returns an error if an expansion type is +# not supported. +# +# Since: 2.8.0 +## +{ 'command': 'query-cpu-model-expansion', + 'data': { 'type': 'CpuModelExpansionType', + 'model': 'CpuModelInfo' }, + 'returns': 'CpuModelExpansionInfo' } + +## +# @CpuModelCompareResult: +# +# An enumeration of CPU model comparison results. The result is usually +# calculated using e.g. CPU features or CPU generations. +# +# @incompatible: If model A is incompatible to model B, model A is not +# guaranteed to run where model B runs and the other way around. +# +# @identical: If model A is identical to model B, model A is guaranteed to run +# where model B runs and the other way around. +# +# @superset: If model A is a superset of model B, model B is guaranteed to run +# where model A runs. There are no guarantees about the other way. +# +# @subset: If model A is a subset of model B, model A is guaranteed to run +# where model B runs. There are no guarantees about the other way. +# +# Since: 2.8.0 +## +{ 'enum': 'CpuModelCompareResult', + 'data': [ 'incompatible', 'identical', 'superset', 'subset' ] } + +## +# @CpuModelCompareInfo: +# +# The result of a CPU model comparison. +# +# @result: The result of the compare operation. +# @responsible-properties: List of properties that led to the comparison result +# not being identical. +# +# @responsible-properties is a list of QOM property names that led to +# both CPUs not being detected as identical. For identical models, this +# list is empty. +# If a QOM property is read-only, that means there's no known way to make the +# CPU models identical. If the special property name "type" is included, the +# models are by definition not identical and cannot be made identical. +# +# Since: 2.8.0 +## +{ 'struct': 'CpuModelCompareInfo', + 'data': {'result': 'CpuModelCompareResult', + 'responsible-properties': ['str'] + } +} + +## +# @query-cpu-model-comparison: +# +# Compares two CPU models, returning how they compare in a specific +# configuration. The results indicates how both models compare regarding +# runnability. This result can be used by tooling to make decisions if a +# certain CPU model will run in a certain configuration or if a compatible +# CPU model has to be created by baselining. +# +# Usually, a CPU model is compared against the maximum possible CPU model +# of a certain configuration (e.g. the "host" model for KVM). If that CPU +# model is identical or a subset, it will run in that configuration. +# +# The result returned by this command may be affected by: +# +# * QEMU version: CPU models may look different depending on the QEMU version. +# (Except for CPU models reported as "static" in query-cpu-definitions.) +# * machine-type: CPU model may look different depending on the machine-type. +# (Except for CPU models reported as "static" in query-cpu-definitions.) +# * machine options (including accelerator): in some architectures, CPU models +# may look different depending on machine and accelerator options. (Except for +# CPU models reported as "static" in query-cpu-definitions.) +# * "-cpu" arguments and global properties: arguments to the -cpu option and +# global properties may affect expansion of CPU models. Using +# query-cpu-model-expansion while using these is not advised. +# +# Some architectures may not support comparing CPU models. s390x supports +# comparing CPU models. +# +# Returns: a CpuModelBaselineInfo. Returns an error if comparing CPU models is +# not supported, if a model cannot be used, if a model contains +# an unknown cpu definition name, unknown properties or properties +# with wrong types. +# +# Since: 2.8.0 +## +{ 'command': 'query-cpu-model-comparison', + 'data': { 'modela': 'CpuModelInfo', 'modelb': 'CpuModelInfo' }, + 'returns': 'CpuModelCompareInfo' } + +## +# @CpuModelBaselineInfo: +# +# The result of a CPU model baseline. +# +# @model: the baselined CpuModelInfo. +# +# Since: 2.8.0 +## +{ 'struct': 'CpuModelBaselineInfo', + 'data': { 'model': 'CpuModelInfo' } } + +## +# @query-cpu-model-baseline: +# +# Baseline two CPU models, creating a compatible third model. The created +# model will always be a static, migration-safe CPU model (see "static" +# CPU model expansion for details). +# +# This interface can be used by tooling to create a compatible CPU model out +# two CPU models. The created CPU model will be identical to or a subset of +# both CPU models when comparing them. Therefore, the created CPU model is +# guaranteed to run where the given CPU models run. +# +# The result returned by this command may be affected by: +# +# * QEMU version: CPU models may look different depending on the QEMU version. +# (Except for CPU models reported as "static" in query-cpu-definitions.) +# * machine-type: CPU model may look different depending on the machine-type. +# (Except for CPU models reported as "static" in query-cpu-definitions.) +# * machine options (including accelerator): in some architectures, CPU models +# may look different depending on machine and accelerator options. (Except for +# CPU models reported as "static" in query-cpu-definitions.) +# * "-cpu" arguments and global properties: arguments to the -cpu option and +# global properties may affect expansion of CPU models. Using +# query-cpu-model-expansion while using these is not advised. +# +# Some architectures may not support baselining CPU models. s390x supports +# baselining CPU models. +# +# Returns: a CpuModelBaselineInfo. Returns an error if baselining CPU models is +# not supported, if a model cannot be used, if a model contains +# an unknown cpu definition name, unknown properties or properties +# with wrong types. +# +# Since: 2.8.0 +## +{ 'command': 'query-cpu-model-baseline', + 'data': { 'modela': 'CpuModelInfo', + 'modelb': 'CpuModelInfo' }, + 'returns': 'CpuModelBaselineInfo' } + +## +# @AddfdInfo: +# +# Information about a file descriptor that was added to an fd set. +# +# @fdset-id: The ID of the fd set that @fd was added to. +# +# @fd: The file descriptor that was received via SCM rights and +# added to the fd set. +# +# Since: 1.2.0 +## +{ 'struct': 'AddfdInfo', 'data': {'fdset-id': 'int', 'fd': 'int'} } + +## +# @add-fd: +# +# Add a file descriptor, that was passed via SCM rights, to an fd set. +# +# @fdset-id: The ID of the fd set to add the file descriptor to. +# +# @opaque: A free-form string that can be used to describe the fd. +# +# Returns: @AddfdInfo on success +# +# If file descriptor was not received, FdNotSupplied +# +# If @fdset-id is a negative value, InvalidParameterValue +# +# Notes: The list of fd sets is shared by all monitor connections. +# +# If @fdset-id is not specified, a new fd set will be created. +# +# Since: 1.2.0 +# +# Example: +# +# -> { "execute": "add-fd", "arguments": { "fdset-id": 1 } } +# <- { "return": { "fdset-id": 1, "fd": 3 } } +# +## +{ 'command': 'add-fd', 'data': {'*fdset-id': 'int', '*opaque': 'str'}, + 'returns': 'AddfdInfo' } + +## +# @remove-fd: +# +# Remove a file descriptor from an fd set. +# +# @fdset-id: The ID of the fd set that the file descriptor belongs to. +# +# @fd: The file descriptor that is to be removed. +# +# Returns: Nothing on success +# If @fdset-id or @fd is not found, FdNotFound +# +# Since: 1.2.0 +# +# Notes: The list of fd sets is shared by all monitor connections. +# +# If @fd is not specified, all file descriptors in @fdset-id +# will be removed. +# +# Example: +# +# -> { "execute": "remove-fd", "arguments": { "fdset-id": 1, "fd": 3 } } +# <- { "return": {} } +# +## +{ 'command': 'remove-fd', 'data': {'fdset-id': 'int', '*fd': 'int'} } + +## +# @FdsetFdInfo: +# +# Information about a file descriptor that belongs to an fd set. +# +# @fd: The file descriptor value. +# +# @opaque: A free-form string that can be used to describe the fd. +# +# Since: 1.2.0 +## +{ 'struct': 'FdsetFdInfo', + 'data': {'fd': 'int', '*opaque': 'str'} } + +## +# @FdsetInfo: +# +# Information about an fd set. +# +# @fdset-id: The ID of the fd set. +# +# @fds: A list of file descriptors that belong to this fd set. +# +# Since: 1.2.0 +## +{ 'struct': 'FdsetInfo', + 'data': {'fdset-id': 'int', 'fds': ['FdsetFdInfo']} } + +## +# @query-fdsets: +# +# Return information describing all fd sets. +# +# Returns: A list of @FdsetInfo +# +# Since: 1.2.0 +# +# Note: The list of fd sets is shared by all monitor connections. +# +# Example: +# +# -> { "execute": "query-fdsets" } +# <- { "return": [ +# { +# "fds": [ +# { +# "fd": 30, +# "opaque": "rdonly:/path/to/file" +# }, +# { +# "fd": 24, +# "opaque": "rdwr:/path/to/file" +# } +# ], +# "fdset-id": 1 +# }, +# { +# "fds": [ +# { +# "fd": 28 +# }, +# { +# "fd": 29 +# } +# ], +# "fdset-id": 0 +# } +# ] +# } +# +## +{ 'command': 'query-fdsets', 'returns': ['FdsetInfo'] } + +## +# @TargetInfo: +# +# Information describing the QEMU target. +# +# @arch: the target architecture (eg "x86_64", "i386", etc) +# +# Since: 1.2.0 +## +{ 'struct': 'TargetInfo', + 'data': { 'arch': 'str' } } + +## +# @query-target: +# +# Return information about the target for this QEMU +# +# Returns: TargetInfo +# +# Since: 1.2.0 +## +{ 'command': 'query-target', 'returns': 'TargetInfo' } + +## +# @AcpiTableOptions: +# +# Specify an ACPI table on the command line to load. +# +# At most one of @file and @data can be specified. The list of files specified +# by any one of them is loaded and concatenated in order. If both are omitted, +# @data is implied. +# +# Other fields / optargs can be used to override fields of the generic ACPI +# table header; refer to the ACPI specification 5.0, section 5.2.6 System +# Description Table Header. If a header field is not overridden, then the +# corresponding value from the concatenated blob is used (in case of @file), or +# it is filled in with a hard-coded value (in case of @data). +# +# String fields are copied into the matching ACPI member from lowest address +# upwards, and silently truncated / NUL-padded to length. +# +# @sig: table signature / identifier (4 bytes) +# +# @rev: table revision number (dependent on signature, 1 byte) +# +# @oem_id: OEM identifier (6 bytes) +# +# @oem_table_id: OEM table identifier (8 bytes) +# +# @oem_rev: OEM-supplied revision number (4 bytes) +# +# @asl_compiler_id: identifier of the utility that created the table +# (4 bytes) +# +# @asl_compiler_rev: revision number of the utility that created the +# table (4 bytes) +# +# @file: colon (:) separated list of pathnames to load and +# concatenate as table data. The resultant binary blob is expected to +# have an ACPI table header. At least one file is required. This field +# excludes @data. +# +# @data: colon (:) separated list of pathnames to load and +# concatenate as table data. The resultant binary blob must not have an +# ACPI table header. At least one file is required. This field excludes +# @file. +# +# Since: 1.5 +## +{ 'struct': 'AcpiTableOptions', + 'data': { + '*sig': 'str', + '*rev': 'uint8', + '*oem_id': 'str', + '*oem_table_id': 'str', + '*oem_rev': 'uint32', + '*asl_compiler_id': 'str', + '*asl_compiler_rev': 'uint32', + '*file': 'str', + '*data': 'str' }} + +## +# @CommandLineParameterType: +# +# Possible types for an option parameter. +# +# @string: accepts a character string +# +# @boolean: accepts "on" or "off" +# +# @number: accepts a number +# +# @size: accepts a number followed by an optional suffix (K)ilo, +# (M)ega, (G)iga, (T)era +# +# Since: 1.5 +## +{ 'enum': 'CommandLineParameterType', + 'data': ['string', 'boolean', 'number', 'size'] } + +## +# @CommandLineParameterInfo: +# +# Details about a single parameter of a command line option. +# +# @name: parameter name +# +# @type: parameter @CommandLineParameterType +# +# @help: human readable text string, not suitable for parsing. +# +# @default: default value string (since 2.1) +# +# Since: 1.5 +## +{ 'struct': 'CommandLineParameterInfo', + 'data': { 'name': 'str', + 'type': 'CommandLineParameterType', + '*help': 'str', + '*default': 'str' } } + +## +# @CommandLineOptionInfo: +# +# Details about a command line option, including its list of parameter details +# +# @option: option name +# +# @parameters: an array of @CommandLineParameterInfo +# +# Since: 1.5 +## +{ 'struct': 'CommandLineOptionInfo', + 'data': { 'option': 'str', 'parameters': ['CommandLineParameterInfo'] } } + +## +# @query-command-line-options: +# +# Query command line option schema. +# +# @option: option name +# +# Returns: list of @CommandLineOptionInfo for all options (or for the given +# @option). Returns an error if the given @option doesn't exist. +# +# Since: 1.5 +# +# Example: +# +# -> { "execute": "query-command-line-options", +# "arguments": { "option": "option-rom" } } +# <- { "return": [ +# { +# "parameters": [ +# { +# "name": "romfile", +# "type": "string" +# }, +# { +# "name": "bootindex", +# "type": "number" +# } +# ], +# "option": "option-rom" +# } +# ] +# } +# +## +{'command': 'query-command-line-options', 'data': { '*option': 'str' }, + 'returns': ['CommandLineOptionInfo'] } + +## +# @X86CPURegister32: +# +# A X86 32-bit register +# +# Since: 1.5 +## +{ 'enum': 'X86CPURegister32', + 'data': [ 'EAX', 'EBX', 'ECX', 'EDX', 'ESP', 'EBP', 'ESI', 'EDI' ] } + +## +# @X86CPUFeatureWordInfo: +# +# Information about a X86 CPU feature word +# +# @cpuid-input-eax: Input EAX value for CPUID instruction for that feature word +# +# @cpuid-input-ecx: Input ECX value for CPUID instruction for that +# feature word +# +# @cpuid-register: Output register containing the feature bits +# +# @features: value of output register, containing the feature bits +# +# Since: 1.5 +## +{ 'struct': 'X86CPUFeatureWordInfo', + 'data': { 'cpuid-input-eax': 'int', + '*cpuid-input-ecx': 'int', + 'cpuid-register': 'X86CPURegister32', + 'features': 'int' } } + +## +# @DummyForceArrays: +# +# Not used by QMP; hack to let us use X86CPUFeatureWordInfoList internally +# +# Since: 2.5 +## +{ 'struct': 'DummyForceArrays', + 'data': { 'unused': ['X86CPUFeatureWordInfo'] } } + + +## +# @NumaOptionsType: +# +# @node: NUMA nodes configuration +# +# @dist: NUMA distance configuration (since 2.10) +# +# @cpu: property based CPU(s) to node mapping (Since: 2.10) +# +# Since: 2.1 +## +{ 'enum': 'NumaOptionsType', + 'data': [ 'node', 'dist', 'cpu' ] } + +## +# @NumaOptions: +# +# A discriminated record of NUMA options. (for OptsVisitor) +# +# Since: 2.1 +## +{ 'union': 'NumaOptions', + 'base': { 'type': 'NumaOptionsType' }, + 'discriminator': 'type', + 'data': { + 'node': 'NumaNodeOptions', + 'dist': 'NumaDistOptions', + 'cpu': 'NumaCpuOptions' }} + +## +# @NumaNodeOptions: +# +# Create a guest NUMA node. (for OptsVisitor) +# +# @nodeid: NUMA node ID (increase by 1 from 0 if omitted) +# +# @cpus: VCPUs belonging to this node (assign VCPUS round-robin +# if omitted) +# +# @mem: memory size of this node; mutually exclusive with @memdev. +# Equally divide total memory among nodes if both @mem and @memdev are +# omitted. +# +# @memdev: memory backend object. If specified for one node, +# it must be specified for all nodes. +# +# Since: 2.1 +## +{ 'struct': 'NumaNodeOptions', + 'data': { + '*nodeid': 'uint16', + '*cpus': ['uint16'], + '*mem': 'size', + '*memdev': 'str' }} + +## +# @NumaDistOptions: +# +# Set the distance between 2 NUMA nodes. +# +# @src: source NUMA node. +# +# @dst: destination NUMA node. +# +# @val: NUMA distance from source node to destination node. +# When a node is unreachable from another node, set the distance +# between them to 255. +# +# Since: 2.10 +## +{ 'struct': 'NumaDistOptions', + 'data': { + 'src': 'uint16', + 'dst': 'uint16', + 'val': 'uint8' }} + +## +# @NumaCpuOptions: +# +# Option "-numa cpu" overrides default cpu to node mapping. +# It accepts the same set of cpu properties as returned by +# query-hotpluggable-cpus[].props, where node-id could be used to +# override default node mapping. +# +# Since: 2.10 +## +{ 'struct': 'NumaCpuOptions', + 'base': 'CpuInstanceProperties', + 'data' : {} } + +## +# @HostMemPolicy: +# +# Host memory policy types +# +# @default: restore default policy, remove any nondefault policy +# +# @preferred: set the preferred host nodes for allocation +# +# @bind: a strict policy that restricts memory allocation to the +# host nodes specified +# +# @interleave: memory allocations are interleaved across the set +# of host nodes specified +# +# Since: 2.1 +## +{ 'enum': 'HostMemPolicy', + 'data': [ 'default', 'preferred', 'bind', 'interleave' ] } + +## +# @Memdev: +# +# Information about memory backend +# +# @id: backend's ID if backend has 'id' property (since 2.9) +# +# @size: memory backend size +# +# @merge: enables or disables memory merge support +# +# @dump: includes memory backend's memory in a core dump or not +# +# @prealloc: enables or disables memory preallocation +# +# @host-nodes: host nodes for its memory policy +# +# @policy: memory policy of memory backend +# +# Since: 2.1 +## +{ 'struct': 'Memdev', + 'data': { + '*id': 'str', + 'size': 'size', + 'merge': 'bool', + 'dump': 'bool', + 'prealloc': 'bool', + 'host-nodes': ['uint16'], + 'policy': 'HostMemPolicy' }} + +## +# @query-memdev: +# +# Returns information for all memory backends. +# +# Returns: a list of @Memdev. +# +# Since: 2.1 +# +# Example: +# +# -> { "execute": "query-memdev" } +# <- { "return": [ +# { +# "id": "mem1", +# "size": 536870912, +# "merge": false, +# "dump": true, +# "prealloc": false, +# "host-nodes": [0, 1], +# "policy": "bind" +# }, +# { +# "size": 536870912, +# "merge": false, +# "dump": true, +# "prealloc": true, +# "host-nodes": [2, 3], +# "policy": "preferred" +# } +# ] +# } +# +## +{ 'command': 'query-memdev', 'returns': ['Memdev'] } + +## +# @PCDIMMDeviceInfo: +# +# PCDIMMDevice state information +# +# @id: device's ID +# +# @addr: physical address, where device is mapped +# +# @size: size of memory that the device provides +# +# @slot: slot number at which device is plugged in +# +# @node: NUMA node number where device is plugged in +# +# @memdev: memory backend linked with device +# +# @hotplugged: true if device was hotplugged +# +# @hotpluggable: true if device if could be added/removed while machine is running +# +# Since: 2.1 +## +{ 'struct': 'PCDIMMDeviceInfo', + 'data': { '*id': 'str', + 'addr': 'int', + 'size': 'int', + 'slot': 'int', + 'node': 'int', + 'memdev': 'str', + 'hotplugged': 'bool', + 'hotpluggable': 'bool' + } +} + +## +# @MemoryDeviceInfo: +# +# Union containing information about a memory device +# +# Since: 2.1 +## +{ 'union': 'MemoryDeviceInfo', 'data': {'dimm': 'PCDIMMDeviceInfo'} } + +## +# @query-memory-devices: +# +# Lists available memory devices and their state +# +# Since: 2.1 +# +# Example: +# +# -> { "execute": "query-memory-devices" } +# <- { "return": [ { "data": +# { "addr": 5368709120, +# "hotpluggable": true, +# "hotplugged": true, +# "id": "d1", +# "memdev": "/objects/memX", +# "node": 0, +# "size": 1073741824, +# "slot": 0}, +# "type": "dimm" +# } ] } +# +## +{ 'command': 'query-memory-devices', 'returns': ['MemoryDeviceInfo'] } + +## +# @MEM_UNPLUG_ERROR: +# +# Emitted when memory hot unplug error occurs. +# +# @device: device name +# +# @msg: Informative message +# +# Since: 2.4 +# +# Example: +# +# <- { "event": "MEM_UNPLUG_ERROR" +# "data": { "device": "dimm1", +# "msg": "acpi: device unplug for unsupported device" +# }, +# "timestamp": { "seconds": 1265044230, "microseconds": 450486 } } +# +## +{ 'event': 'MEM_UNPLUG_ERROR', + 'data': { 'device': 'str', 'msg': 'str' } } + +## +# @ACPISlotType: +# +# @DIMM: memory slot +# @CPU: logical CPU slot (since 2.7) +## +{ 'enum': 'ACPISlotType', 'data': [ 'DIMM', 'CPU' ] } + +## +# @ACPIOSTInfo: +# +# OSPM Status Indication for a device +# For description of possible values of @source and @status fields +# see "_OST (OSPM Status Indication)" chapter of ACPI5.0 spec. +# +# @device: device ID associated with slot +# +# @slot: slot ID, unique per slot of a given @slot-type +# +# @slot-type: type of the slot +# +# @source: an integer containing the source event +# +# @status: an integer containing the status code +# +# Since: 2.1 +## +{ 'struct': 'ACPIOSTInfo', + 'data' : { '*device': 'str', + 'slot': 'str', + 'slot-type': 'ACPISlotType', + 'source': 'int', + 'status': 'int' } } + +## +# @query-acpi-ospm-status: +# +# Return a list of ACPIOSTInfo for devices that support status +# reporting via ACPI _OST method. +# +# Since: 2.1 +# +# Example: +# +# -> { "execute": "query-acpi-ospm-status" } +# <- { "return": [ { "device": "d1", "slot": "0", "slot-type": "DIMM", "source": 1, "status": 0}, +# { "slot": "1", "slot-type": "DIMM", "source": 0, "status": 0}, +# { "slot": "2", "slot-type": "DIMM", "source": 0, "status": 0}, +# { "slot": "3", "slot-type": "DIMM", "source": 0, "status": 0} +# ]} +# +## +{ 'command': 'query-acpi-ospm-status', 'returns': ['ACPIOSTInfo'] } + +## +# @ACPI_DEVICE_OST: +# +# Emitted when guest executes ACPI _OST method. +# +# @info: ACPIOSTInfo type as described in qapi-schema.json +# +# Since: 2.1 +# +# Example: +# +# <- { "event": "ACPI_DEVICE_OST", +# "data": { "device": "d1", "slot": "0", +# "slot-type": "DIMM", "source": 1, "status": 0 } } +# +## +{ 'event': 'ACPI_DEVICE_OST', + 'data': { 'info': 'ACPIOSTInfo' } } + +## +# @rtc-reset-reinjection: +# +# This command will reset the RTC interrupt reinjection backlog. +# Can be used if another mechanism to synchronize guest time +# is in effect, for example QEMU guest agent's guest-set-time +# command. +# +# Since: 2.1 +# +# Example: +# +# -> { "execute": "rtc-reset-reinjection" } +# <- { "return": {} } +# +## +{ 'command': 'rtc-reset-reinjection' } + +## +# @RTC_CHANGE: +# +# Emitted when the guest changes the RTC time. +# +# @offset: offset between base RTC clock (as specified by -rtc base), and +# new RTC clock value +# +# Note: This event is rate-limited. +# +# Since: 0.13.0 +# +# Example: +# +# <- { "event": "RTC_CHANGE", +# "data": { "offset": 78 }, +# "timestamp": { "seconds": 1267020223, "microseconds": 435656 } } +# +## +{ 'event': 'RTC_CHANGE', + 'data': { 'offset': 'int' } } + +## +# @ReplayMode: +# +# Mode of the replay subsystem. +# +# @none: normal execution mode. Replay or record are not enabled. +# +# @record: record mode. All non-deterministic data is written into the +# replay log. +# +# @play: replay mode. Non-deterministic data required for system execution +# is read from the log. +# +# Since: 2.5 +## +{ 'enum': 'ReplayMode', + 'data': [ 'none', 'record', 'play' ] } + +## +# @xen-load-devices-state: +# +# Load the state of all devices from file. The RAM and the block devices +# of the VM are not loaded by this command. +# +# @filename: the file to load the state of the devices from as binary +# data. See xen-save-devices-state.txt for a description of the binary +# format. +# +# Since: 2.7 +# +# Example: +# +# -> { "execute": "xen-load-devices-state", +# "arguments": { "filename": "/tmp/resume" } } +# <- { "return": {} } +# +## +{ 'command': 'xen-load-devices-state', 'data': {'filename': 'str'} } + +## +# @GICCapability: +# +# The struct describes capability for a specific GIC (Generic +# Interrupt Controller) version. These bits are not only decided by +# QEMU/KVM software version, but also decided by the hardware that +# the program is running upon. +# +# @version: version of GIC to be described. Currently, only 2 and 3 +# are supported. +# +# @emulated: whether current QEMU/hardware supports emulated GIC +# device in user space. +# +# @kernel: whether current QEMU/hardware supports hardware +# accelerated GIC device in kernel. +# +# Since: 2.6 +## +{ 'struct': 'GICCapability', + 'data': { 'version': 'int', + 'emulated': 'bool', + 'kernel': 'bool' } } + +## +# @query-gic-capabilities: +# +# This command is ARM-only. It will return a list of GICCapability +# objects that describe its capability bits. +# +# Returns: a list of GICCapability objects. +# +# Since: 2.6 +# +# Example: +# +# -> { "execute": "query-gic-capabilities" } +# <- { "return": [{ "version": 2, "emulated": true, "kernel": false }, +# { "version": 3, "emulated": false, "kernel": true } ] } +# +## +{ 'command': 'query-gic-capabilities', 'returns': ['GICCapability'] } + +## +# @CpuInstanceProperties: +# +# List of properties to be used for hotplugging a CPU instance, +# it should be passed by management with device_add command when +# a CPU is being hotplugged. +# +# @node-id: NUMA node ID the CPU belongs to +# @socket-id: socket number within node/board the CPU belongs to +# @core-id: core number within socket the CPU belongs to +# @thread-id: thread number within core the CPU belongs to +# +# Note: currently there are 4 properties that could be present +# but management should be prepared to pass through other +# properties with device_add command to allow for future +# interface extension. This also requires the filed names to be kept in +# sync with the properties passed to -device/device_add. +# +# Since: 2.7 +## +{ 'struct': 'CpuInstanceProperties', + 'data': { '*node-id': 'int', + '*socket-id': 'int', + '*core-id': 'int', + '*thread-id': 'int' + } +} + +## +# @HotpluggableCPU: +# +# @type: CPU object type for usage with device_add command +# @props: list of properties to be used for hotplugging CPU +# @vcpus-count: number of logical VCPU threads @HotpluggableCPU provides +# @qom-path: link to existing CPU object if CPU is present or +# omitted if CPU is not present. +# +# Since: 2.7 +## +{ 'struct': 'HotpluggableCPU', + 'data': { 'type': 'str', + 'vcpus-count': 'int', + 'props': 'CpuInstanceProperties', + '*qom-path': 'str' + } +} + +## +# @query-hotpluggable-cpus: +# +# Returns: a list of HotpluggableCPU objects. +# +# Since: 2.7 +# +# Example: +# +# For pseries machine type started with -smp 2,cores=2,maxcpus=4 -cpu POWER8: +# +# -> { "execute": "query-hotpluggable-cpus" } +# <- {"return": [ +# { "props": { "core": 8 }, "type": "POWER8-spapr-cpu-core", +# "vcpus-count": 1 }, +# { "props": { "core": 0 }, "type": "POWER8-spapr-cpu-core", +# "vcpus-count": 1, "qom-path": "/machine/unattached/device[0]"} +# ]}' +# +# For pc machine type started with -smp 1,maxcpus=2: +# +# -> { "execute": "query-hotpluggable-cpus" } +# <- {"return": [ +# { +# "type": "qemu64-x86_64-cpu", "vcpus-count": 1, +# "props": {"core-id": 0, "socket-id": 1, "thread-id": 0} +# }, +# { +# "qom-path": "/machine/unattached/device[0]", +# "type": "qemu64-x86_64-cpu", "vcpus-count": 1, +# "props": {"core-id": 0, "socket-id": 0, "thread-id": 0} +# } +# ]} +# +# For s390x-virtio-ccw machine type started with -smp 1,maxcpus=2 -cpu qemu +# (Since: 2.11): +# +# -> { "execute": "query-hotpluggable-cpus" } +# <- {"return": [ +# { +# "type": "qemu-s390x-cpu", "vcpus-count": 1, +# "props": { "core-id": 1 } +# }, +# { +# "qom-path": "/machine/unattached/device[0]", +# "type": "qemu-s390x-cpu", "vcpus-count": 1, +# "props": { "core-id": 0 } +# } +# ]} +# +## +{ 'command': 'query-hotpluggable-cpus', 'returns': ['HotpluggableCPU'] } + +## +# @GuidInfo: +# +# GUID information. +# +# @guid: the globally unique identifier +# +# Since: 2.9 +## +{ 'struct': 'GuidInfo', 'data': {'guid': 'str'} } + +## +# @query-vm-generation-id: +# +# Show Virtual Machine Generation ID +# +# Since: 2.9 +## +{ 'command': 'query-vm-generation-id', 'returns': 'GuidInfo' } diff --git a/include/hw/qdev-properties.h b/include/hw/qdev-properties.h index 40c2c8acb1a..b2ad8e9faa9 100644 --- a/include/hw/qdev-properties.h +++ b/include/hw/qdev-properties.h @@ -1,7 +1,8 @@ #ifndef QEMU_QDEV_PROPERTIES_H #define QEMU_QDEV_PROPERTIES_H -#include "qapi-types.h" +#include "qapi/qapi-types-block.h" +#include "qapi/qapi-types-misc.h" #include "hw/qdev-core.h" /*** qdev-properties.c ***/ diff --git a/include/monitor/monitor.h b/include/monitor/monitor.h index 50f7cea057d..d1024d4bdc3 100644 --- a/include/monitor/monitor.h +++ b/include/monitor/monitor.h @@ -3,7 +3,7 @@ #include "qemu-common.h" #include "block/block.h" -#include "qapi-types.h" +#include "qapi/qapi-types-misc.h" #include "qemu/readline.h" extern Monitor *cur_mon; diff --git a/include/sysemu/arch_init.h b/include/sysemu/arch_init.h index d40d882e383..cecd494159d 100644 --- a/include/sysemu/arch_init.h +++ b/include/sysemu/arch_init.h @@ -1,7 +1,7 @@ #ifndef QEMU_ARCH_INIT_H #define QEMU_ARCH_INIT_H -#include "qapi-types.h" +#include "qapi/qapi-types-misc.h" enum { QEMU_ARCH_ALL = -1, diff --git a/include/sysemu/balloon.h b/include/sysemu/balloon.h index af49e19c787..66543ae8f4b 100644 --- a/include/sysemu/balloon.h +++ b/include/sysemu/balloon.h @@ -14,7 +14,7 @@ #ifndef QEMU_BALLOON_H #define QEMU_BALLOON_H -#include "qapi-types.h" +#include "qapi/qapi-types-misc.h" typedef void (QEMUBalloonEvent)(void *opaque, ram_addr_t target); typedef void (QEMUBalloonStatus)(void *opaque, BalloonInfo *info); diff --git a/include/sysemu/dump.h b/include/sysemu/dump.h index 2424e314255..d824bc0941a 100644 --- a/include/sysemu/dump.h +++ b/include/sysemu/dump.h @@ -14,7 +14,7 @@ #ifndef DUMP_H #define DUMP_H -#include "qapi-types.h" +#include "qapi/qapi-types-misc.h" #define MAKEDUMPFILE_SIGNATURE "makedumpfile" #define MAX_SIZE_MDF_HEADER (4096) /* max size of makedumpfile_header */ diff --git a/include/sysemu/hostmem.h b/include/sysemu/hostmem.h index e1efaf04ac7..47bc9846aca 100644 --- a/include/sysemu/hostmem.h +++ b/include/sysemu/hostmem.h @@ -14,7 +14,7 @@ #define SYSEMU_HOSTMEM_H #include "sysemu/sysemu.h" /* for MAX_NODES */ -#include "qapi-types.h" +#include "qapi/qapi-types-misc.h" #include "qom/object.h" #include "exec/memory.h" #include "qemu/bitmap.h" diff --git a/include/sysemu/replay.h b/include/sysemu/replay.h index fb533ed9b6a..c0204e641c3 100644 --- a/include/sysemu/replay.h +++ b/include/sysemu/replay.h @@ -13,7 +13,8 @@ */ #include "sysemu.h" -#include "qapi-types.h" +#include "qapi/qapi-types-misc.h" +#include "qapi/qapi-types-ui.h" /* replay clock kinds */ enum ReplayClockKind { diff --git a/vl.c b/vl.c index 24d855a373c..cdba3a39975 100644 --- a/vl.c +++ b/vl.c @@ -100,7 +100,6 @@ int main(int argc, char **argv) #include "qemu/option.h" #include "qemu/config-file.h" #include "qemu-options.h" -#include "qmp-commands.h" #include "qemu/main-loop.h" #ifdef CONFIG_VIRTFS #include "fsdev/qemu-fsdev.h" @@ -126,6 +125,9 @@ int main(int argc, char **argv) #include "sysemu/replay.h" #include "qapi/qapi-events-run-state.h" #include "qapi/qapi-visit-block-core.h" +#include "qapi/qapi-commands-block-core.h" +#include "qapi/qapi-commands-misc.h" +#include "qapi/qapi-commands-run-state.h" #include "qapi/qmp/qerror.h" #include "sysemu/iothread.h" diff --git a/arch_init.c b/arch_init.c index 4c36f2b076d..46d03f550da 100644 --- a/arch_init.c +++ b/arch_init.c @@ -28,9 +28,9 @@ #include "sysemu/arch_init.h" #include "hw/pci/pci.h" #include "hw/audio/soundhw.h" +#include "qapi/qapi-commands-misc.h" #include "qemu/config-file.h" #include "qemu/error-report.h" -#include "qmp-commands.h" #include "hw/acpi/acpi.h" #include "qemu/help_option.h" diff --git a/balloon.c b/balloon.c index d8dd6fe7738..6bf0a968137 100644 --- a/balloon.c +++ b/balloon.c @@ -30,8 +30,8 @@ #include "sysemu/kvm.h" #include "sysemu/balloon.h" #include "trace-root.h" -#include "qmp-commands.h" #include "qapi/error.h" +#include "qapi/qapi-commands-misc.h" #include "qapi/qmp/qerror.h" static QEMUBalloonEvent *balloon_event_fn; diff --git a/block/iscsi.c b/block/iscsi.c index 421983dd6ff..d2b320ea41e 100644 --- a/block/iscsi.c +++ b/block/iscsi.c @@ -37,8 +37,8 @@ #include "qemu/iov.h" #include "qemu/option.h" #include "qemu/uuid.h" -#include "qmp-commands.h" #include "qapi/error.h" +#include "qapi/qapi-commands-misc.h" #include "qapi/qmp/qdict.h" #include "qapi/qmp/qstring.h" #include "crypto/secret.h" diff --git a/cpus.c b/cpus.c index ac5b21ef076..4f5f88edba9 100644 --- a/cpus.c +++ b/cpus.c @@ -27,6 +27,7 @@ #include "cpu.h" #include "monitor/monitor.h" #include "qapi/error.h" +#include "qapi/qapi-commands-misc.h" #include "qapi/qapi-events-run-state.h" #include "qapi/qmp/qerror.h" #include "qemu/error-report.h" @@ -39,7 +40,6 @@ #include "sysemu/hax.h" #include "sysemu/hvf.h" #include "sysemu/whpx.h" -#include "qmp-commands.h" #include "exec/exec-all.h" #include "qemu/thread.h" diff --git a/dump.c b/dump.c index 7b13baa4136..097e60b2b36 100644 --- a/dump.c +++ b/dump.c @@ -23,9 +23,9 @@ #include "sysemu/memory_mapping.h" #include "sysemu/cpus.h" #include "qapi/error.h" +#include "qapi/qapi-commands-misc.h" +#include "qapi/qapi-events-misc.h" #include "qapi/qmp/qerror.h" -#include "qmp-commands.h" -#include "qapi-event.h" #include "qemu/error-report.h" #include "hw/misc/vmcoreinfo.h" diff --git a/hmp.c b/hmp.c index cc35a787f94..8ea227dac4e 100644 --- a/hmp.c +++ b/hmp.c @@ -23,13 +23,21 @@ #include "qemu/config-file.h" #include "qemu/option.h" #include "qemu/timer.h" -#include "qmp-commands.h" #include "qemu/sockets.h" #include "monitor/monitor.h" #include "monitor/qdev.h" #include "qapi/error.h" #include "qapi/opts-visitor.h" #include "qapi-builtin-visit.h" +#include "qapi/qapi-commands-block.h" +#include "qapi/qapi-commands-char.h" +#include "qapi/qapi-commands-migration.h" +#include "qapi/qapi-commands-misc.h" +#include "qapi/qapi-commands-net.h" +#include "qapi/qapi-commands-rocker.h" +#include "qapi/qapi-commands-run-state.h" +#include "qapi/qapi-commands-tpm.h" +#include "qapi/qapi-commands-ui.h" #include "qapi/qmp/qdict.h" #include "qapi/qmp/qerror.h" #include "qapi/string-input-visitor.h" diff --git a/hw/acpi/core.c b/hw/acpi/core.c index 5d4ce925dcd..b8d39012cda 100644 --- a/hw/acpi/core.c +++ b/hw/acpi/core.c @@ -28,7 +28,7 @@ #include "qapi/error.h" #include "qapi/opts-visitor.h" #include "qapi/qapi-events-run-state.h" -#include "qapi-visit.h" +#include "qapi/qapi-visit-misc.h" #include "qemu/error-report.h" #include "qemu/option.h" diff --git a/hw/acpi/cpu.c b/hw/acpi/cpu.c index a233fe17cf2..5ae595ecbe6 100644 --- a/hw/acpi/cpu.c +++ b/hw/acpi/cpu.c @@ -2,7 +2,7 @@ #include "hw/boards.h" #include "hw/acpi/cpu.h" #include "qapi/error.h" -#include "qapi-event.h" +#include "qapi/qapi-events-misc.h" #include "trace.h" #include "sysemu/numa.h" diff --git a/hw/acpi/memory_hotplug.c b/hw/acpi/memory_hotplug.c index ea958a0e997..0ff1712c4cd 100644 --- a/hw/acpi/memory_hotplug.c +++ b/hw/acpi/memory_hotplug.c @@ -5,8 +5,8 @@ #include "hw/boards.h" #include "hw/qdev-core.h" #include "trace.h" -#include "qapi-event.h" #include "qapi/error.h" +#include "qapi/qapi-events-misc.h" #define MEMORY_SLOTS_NUMBER "MDNR" #define MEMORY_HOTPLUG_IO_REGION "HPMR" diff --git a/hw/acpi/vmgenid.c b/hw/acpi/vmgenid.c index f25eafc0eca..d78b579a201 100644 --- a/hw/acpi/vmgenid.c +++ b/hw/acpi/vmgenid.c @@ -12,7 +12,7 @@ #include "qemu/osdep.h" #include "qapi/error.h" -#include "qmp-commands.h" +#include "qapi/qapi-commands-misc.h" #include "hw/acpi/acpi.h" #include "hw/acpi/aml-build.h" #include "hw/acpi/vmgenid.h" diff --git a/hw/core/qdev.c b/hw/core/qdev.c index 7ed1f431f02..7635cf55fd0 100644 --- a/hw/core/qdev.c +++ b/hw/core/qdev.c @@ -29,6 +29,7 @@ #include "hw/qdev.h" #include "sysemu/sysemu.h" #include "qapi/error.h" +#include "qapi/qapi-events-misc.h" #include "qapi/qmp/qerror.h" #include "qapi/visitor.h" #include "qemu/error-report.h" @@ -36,7 +37,6 @@ #include "hw/hotplug.h" #include "hw/boards.h" #include "hw/sysbus.h" -#include "qapi-event.h" bool qdev_hotplug = false; static bool qdev_hot_added = false; diff --git a/hw/i386/xen/xen-hvm.c b/hw/i386/xen/xen-hvm.c index bfdbe555801..f24b7d4923b 100644 --- a/hw/i386/xen/xen-hvm.c +++ b/hw/i386/xen/xen-hvm.c @@ -16,8 +16,8 @@ #include "hw/i386/apic-msidef.h" #include "hw/xen/xen_common.h" #include "hw/xen/xen_backend.h" -#include "qmp-commands.h" #include "qapi/error.h" +#include "qapi/qapi-commands-misc.h" #include "qemu/error-report.h" #include "qemu/range.h" #include "sysemu/xen-mapcache.h" diff --git a/hw/ipmi/ipmi.c b/hw/ipmi/ipmi.c index adbbf6e4a63..9be281fd879 100644 --- a/hw/ipmi/ipmi.c +++ b/hw/ipmi/ipmi.c @@ -26,9 +26,9 @@ #include "hw/hw.h" #include "hw/ipmi/ipmi.h" #include "sysemu/sysemu.h" -#include "qmp-commands.h" #include "qom/object_interfaces.h" #include "qapi/error.h" +#include "qapi/qapi-commands-misc.h" #include "qapi/visitor.h" static uint32_t ipmi_current_uuid = 1; diff --git a/hw/pci/pci-stub.c b/hw/pci/pci-stub.c index 74ce7316da1..b941a0e842e 100644 --- a/hw/pci/pci-stub.c +++ b/hw/pci/pci-stub.c @@ -22,9 +22,9 @@ #include "sysemu/sysemu.h" #include "monitor/monitor.h" #include "qapi/error.h" +#include "qapi/qapi-commands-misc.h" #include "qapi/qmp/qerror.h" #include "hw/pci/pci.h" -#include "qmp-commands.h" #include "hw/pci/msi.h" bool msi_nonbroken; diff --git a/hw/pci/pci.c b/hw/pci/pci.c index e006b6ac715..2174c254ebf 100644 --- a/hw/pci/pci.c +++ b/hw/pci/pci.c @@ -34,7 +34,6 @@ #include "hw/loader.h" #include "qemu/error-report.h" #include "qemu/range.h" -#include "qmp-commands.h" #include "trace.h" #include "hw/pci/msi.h" #include "hw/pci/msix.h" @@ -42,6 +41,7 @@ #include "hw/hotplug.h" #include "hw/boards.h" #include "qapi/error.h" +#include "qapi/qapi-commands-misc.h" #include "qemu/cutils.h" //#define DEBUG_PCI diff --git a/hw/ppc/spapr_rtc.c b/hw/ppc/spapr_rtc.c index cfdb274bfdf..a37360537e0 100644 --- a/hw/ppc/spapr_rtc.c +++ b/hw/ppc/spapr_rtc.c @@ -30,8 +30,8 @@ #include "qemu/timer.h" #include "sysemu/sysemu.h" #include "hw/ppc/spapr.h" -#include "qapi-event.h" #include "qapi/error.h" +#include "qapi/qapi-events-misc.h" #include "qemu/cutils.h" void spapr_rtc_read(sPAPRRTCState *rtc, struct tm *tm, uint32_t *ns) diff --git a/hw/s390x/s390-skeys.c b/hw/s390x/s390-skeys.c index bdb6c18a0f9..76241c240e1 100644 --- a/hw/s390x/s390-skeys.c +++ b/hw/s390x/s390-skeys.c @@ -11,9 +11,9 @@ #include "qemu/osdep.h" #include "hw/boards.h" -#include "qmp-commands.h" #include "hw/s390x/storage-keys.h" #include "qapi/error.h" +#include "qapi/qapi-commands-misc.h" #include "qapi/qmp/qdict.h" #include "qemu/error-report.h" #include "sysemu/kvm.h" diff --git a/hw/timer/mc146818rtc.c b/hw/timer/mc146818rtc.c index 9d93a16e0fc..6f1f723b1f0 100644 --- a/hw/timer/mc146818rtc.c +++ b/hw/timer/mc146818rtc.c @@ -31,9 +31,9 @@ #include "sysemu/replay.h" #include "hw/timer/mc146818rtc.h" #include "qapi/error.h" +#include "qapi/qapi-commands-misc.h" +#include "qapi/qapi-events-misc.h" #include "qapi/visitor.h" -#include "qapi-event.h" -#include "qmp-commands.h" #ifdef TARGET_I386 #include "hw/i386/apic.h" diff --git a/hw/virtio/virtio-balloon.c b/hw/virtio/virtio-balloon.c index 48224493a0c..f456cea2e71 100644 --- a/hw/virtio/virtio-balloon.c +++ b/hw/virtio/virtio-balloon.c @@ -24,8 +24,8 @@ #include "sysemu/kvm.h" #include "exec/address-spaces.h" #include "qapi/error.h" +#include "qapi/qapi-events-misc.h" #include "qapi/visitor.h" -#include "qapi-event.h" #include "trace.h" #include "qemu/error-report.h" diff --git a/hw/watchdog/watchdog.c b/hw/watchdog/watchdog.c index c7843d5748a..6e8ba061d8e 100644 --- a/hw/watchdog/watchdog.c +++ b/hw/watchdog/watchdog.c @@ -24,12 +24,12 @@ #include "qemu/config-file.h" #include "qemu/queue.h" #include "qapi/error.h" +#include "qapi/qapi-commands-run-state.h" #include "qapi/qapi-events-run-state.h" #include "sysemu/sysemu.h" #include "sysemu/watchdog.h" #include "hw/nmi.h" #include "qemu/help_option.h" -#include "qmp-commands.h" static WatchdogAction watchdog_action = WATCHDOG_ACTION_RESET; static QLIST_HEAD(watchdog_list, WatchdogTimerModel) watchdog_list; diff --git a/iothread.c b/iothread.c index 4b9bbde4cdc..2ec5a3bffea 100644 --- a/iothread.c +++ b/iothread.c @@ -18,8 +18,8 @@ #include "block/aio.h" #include "block/block.h" #include "sysemu/iothread.h" -#include "qmp-commands.h" #include "qapi/error.h" +#include "qapi/qapi-commands-misc.h" #include "qemu/error-report.h" #include "qemu/rcu.h" #include "qemu/main-loop.h" diff --git a/migration/savevm.c b/migration/savevm.c index 8e6d8724524..358c5b51e2f 100644 --- a/migration/savevm.c +++ b/migration/savevm.c @@ -41,12 +41,13 @@ #include "savevm.h" #include "postcopy-ram.h" #include "qapi/error.h" +#include "qapi/qapi-commands-migration.h" +#include "qapi/qapi-commands-misc.h" #include "qapi/qmp/qerror.h" #include "qemu/error-report.h" #include "sysemu/cpus.h" #include "exec/memory.h" #include "exec/target_page.h" -#include "qmp-commands.h" #include "trace.h" #include "qemu/iov.h" #include "block/snapshot.h" diff --git a/numa.c b/numa.c index 7e0e789b02d..5d7529c1d90 100644 --- a/numa.c +++ b/numa.c @@ -29,12 +29,12 @@ #include "qemu/bitmap.h" #include "qom/cpu.h" #include "qemu/error-report.h" -#include "qapi-visit.h" #include "qapi/error.h" #include "qapi/opts-visitor.h" +#include "qapi/qapi-commands-misc.h" +#include "qapi/qapi-visit-misc.h" #include "hw/boards.h" #include "sysemu/hostmem.h" -#include "qmp-commands.h" #include "hw/mem/pc-dimm.h" #include "qemu/option.h" #include "qemu/config-file.h" diff --git a/qdev-monitor.c b/qdev-monitor.c index 846238175f3..b8f6bc3f7ed 100644 --- a/qdev-monitor.c +++ b/qdev-monitor.c @@ -22,9 +22,9 @@ #include "hw/sysbus.h" #include "monitor/monitor.h" #include "monitor/qdev.h" -#include "qmp-commands.h" #include "sysemu/arch_init.h" #include "qapi/error.h" +#include "qapi/qapi-commands-misc.h" #include "qapi/qmp/qdict.h" #include "qapi/qmp/qerror.h" #include "qemu/config-file.h" diff --git a/qmp.c b/qmp.c index 793f6f33230..a8d4eba973e 100644 --- a/qmp.c +++ b/qmp.c @@ -21,7 +21,6 @@ #include "sysemu/sysemu.h" #include "qemu/config-file.h" #include "qemu/uuid.h" -#include "qmp-commands.h" #include "chardev/char.h" #include "ui/qemu-spice.h" #include "ui/vnc.h" @@ -32,6 +31,9 @@ #include "sysemu/block-backend.h" #include "qom/qom-qobject.h" #include "qapi/error.h" +#include "qapi/qapi-commands-block-core.h" +#include "qapi/qapi-commands-misc.h" +#include "qapi/qapi-commands-ui.h" #include "qapi/qmp/qdict.h" #include "qapi/qmp/qerror.h" #include "qapi/qobject-input-visitor.h" diff --git a/stubs/uuid.c b/stubs/uuid.c index a880de8d61d..a802e9836bc 100644 --- a/stubs/uuid.c +++ b/stubs/uuid.c @@ -1,7 +1,7 @@ #include "qemu/osdep.h" #include "qemu-common.h" +#include "qapi/qapi-commands-misc.h" #include "qemu/uuid.h" -#include "qmp-commands.h" UuidInfo *qmp_query_uuid(Error **errp) { diff --git a/stubs/vmgenid.c b/stubs/vmgenid.c index 3c8fe55bdf3..568e42b0648 100644 --- a/stubs/vmgenid.c +++ b/stubs/vmgenid.c @@ -1,6 +1,6 @@ #include "qemu/osdep.h" -#include "qmp-commands.h" #include "qapi/error.h" +#include "qapi/qapi-commands-misc.h" #include "qapi/qmp/qerror.h" GuidInfo *qmp_query_vm_generation_id(Error **errp) diff --git a/stubs/xen-hvm.c b/stubs/xen-hvm.c index 3ca6c51b212..0067bcc6db7 100644 --- a/stubs/xen-hvm.c +++ b/stubs/xen-hvm.c @@ -12,7 +12,7 @@ #include "qemu-common.h" #include "hw/xen/xen.h" #include "exec/memory.h" -#include "qmp-commands.h" +#include "qapi/qapi-commands-misc.h" int xen_pci_slot_get_pirq(PCIDevice *pci_dev, int irq_num) { diff --git a/target/arm/monitor.c b/target/arm/monitor.c index 299cb80ae7d..4cdd2676ddc 100644 --- a/target/arm/monitor.c +++ b/target/arm/monitor.c @@ -19,10 +19,11 @@ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ + #include "qemu/osdep.h" -#include "qmp-commands.h" #include "hw/boards.h" #include "kvm_arm.h" +#include "qapi/qapi-commands-misc.h" static GICCapability *gic_cap_new(int version) { diff --git a/target/i386/cpu.c b/target/i386/cpu.c index b5e431e769d..2c04645ceac 100644 --- a/target/i386/cpu.c +++ b/target/i386/cpu.c @@ -31,10 +31,10 @@ #include "qemu/option.h" #include "qemu/config-file.h" #include "qapi/error.h" +#include "qapi/qapi-visit-misc.h" +#include "qapi/qapi-visit-run-state.h" #include "qapi/qmp/qdict.h" #include "qapi/qmp/qerror.h" - -#include "qapi-visit.h" #include "qapi/visitor.h" #include "qom/qom-qobject.h" #include "sysemu/arch_init.h" diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c index 627002b2256..c2b775f4eb2 100644 --- a/target/s390x/cpu.c +++ b/target/s390x/cpu.c @@ -35,7 +35,8 @@ #include "qemu/error-report.h" #include "trace.h" #include "qapi/visitor.h" -#include "qapi-visit.h" +#include "qapi/qapi-visit-misc.h" +#include "qapi/qapi-visit-run-state.h" #include "sysemu/hw_accel.h" #include "exec/exec-all.h" #include "hw/qdev-properties.h" diff --git a/target/s390x/sigp.c b/target/s390x/sigp.c index 92b2830940c..aff1530c82b 100644 --- a/target/s390x/sigp.c +++ b/target/s390x/sigp.c @@ -17,7 +17,7 @@ #include "exec/exec-all.h" #include "sysemu/sysemu.h" #include "trace.h" -#include "qapi-types.h" +#include "qapi/qapi-types-misc.h" QemuMutex qemu_sigp_mutex; diff --git a/tests/qmp-test.c b/tests/qmp-test.c index 580848307ad..22445d9ec25 100644 --- a/tests/qmp-test.c +++ b/tests/qmp-test.c @@ -12,8 +12,9 @@ #include "qemu/osdep.h" #include "libqtest.h" -#include "qapi-visit.h" #include "qapi/error.h" +#include "qapi/qapi-visit-introspect.h" +#include "qapi/qapi-visit-misc.h" #include "qapi/qmp/qdict.h" #include "qapi/qmp/qlist.h" #include "qapi/qobject-input-visitor.h" diff --git a/tests/test-qobject-input-visitor.c b/tests/test-qobject-input-visitor.c index 3900be26101..d3a56bd0712 100644 --- a/tests/test-qobject-input-visitor.c +++ b/tests/test-qobject-input-visitor.c @@ -15,6 +15,7 @@ #include "qemu-common.h" #include "qapi/error.h" +#include "qapi/qapi-visit-introspect.h" #include "qapi/qobject-input-visitor.h" #include "test-qapi-visit.h" #include "qapi/qmp/qbool.h" @@ -25,7 +26,6 @@ #include "qapi/qmp/qjson.h" #include "test-qmp-introspect.h" #include "qmp-introspect.h" -#include "qapi-visit.h" typedef struct TestInputVisitorData { QObject *obj; diff --git a/tests/test-visitor-serialization.c b/tests/test-visitor-serialization.c index dd7e51d4f5d..438c18a0d64 100644 --- a/tests/test-visitor-serialization.c +++ b/tests/test-visitor-serialization.c @@ -23,7 +23,6 @@ #include "qapi/qobject-output-visitor.h" #include "qapi/string-input-visitor.h" #include "qapi/string-output-visitor.h" -#include "qapi-visit.h" #include "qapi/dealloc-visitor.h" enum PrimitiveTypeKind { diff --git a/ui/gtk.c b/ui/gtk.c index ab646b70e17..0750262ca8f 100644 --- a/ui/gtk.c +++ b/ui/gtk.c @@ -37,6 +37,7 @@ #include "qemu/osdep.h" #include "qemu-common.h" #include "qapi/error.h" +#include "qapi/qapi-commands-misc.h" #include "qemu/cutils.h" #include "ui/console.h" @@ -52,7 +53,6 @@ #include "trace.h" #include "ui/input.h" #include "sysemu/sysemu.h" -#include "qmp-commands.h" #include "keymaps.h" #include "chardev/char.h" #include "qom/object.h" diff --git a/util/qemu-config.c b/util/qemu-config.c index 10cae120cca..c651c4826e7 100644 --- a/util/qemu-config.c +++ b/util/qemu-config.c @@ -1,12 +1,12 @@ #include "qemu/osdep.h" #include "qapi/error.h" +#include "qapi/qapi-commands-misc.h" #include "qapi/qmp/qdict.h" #include "qapi/qmp/qlist.h" #include "qemu-common.h" #include "qemu/error-report.h" #include "qemu/option.h" #include "qemu/config-file.h" -#include "qmp-commands.h" static QemuOptsList *vm_config_groups[48]; static QemuOptsList *drive_config_groups[5]; diff --git a/.gitignore b/.gitignore index 42c57998fd5..7f162e862fe 100644 --- a/.gitignore +++ b/.gitignore @@ -38,6 +38,7 @@ /qapi/qapi-commands-crypto.[ch] /qapi/qapi-commands-introspect.[ch] /qapi/qapi-commands-migration.[ch] +/qapi/qapi-commands-misc.[ch] /qapi/qapi-commands-net.[ch] /qapi/qapi-commands-rocker.[ch] /qapi/qapi-commands-run-state.[ch] @@ -53,6 +54,7 @@ /qapi/qapi-events-crypto.[ch] /qapi/qapi-events-introspect.[ch] /qapi/qapi-events-migration.[ch] +/qapi/qapi-events-misc.[ch] /qapi/qapi-events-net.[ch] /qapi/qapi-events-rocker.[ch] /qapi/qapi-events-run-state.[ch] @@ -68,6 +70,7 @@ /qapi/qapi-types-crypto.[ch] /qapi/qapi-types-introspect.[ch] /qapi/qapi-types-migration.[ch] +/qapi/qapi-types-misc.[ch] /qapi/qapi-types-net.[ch] /qapi/qapi-types-rocker.[ch] /qapi/qapi-types-run-state.[ch] @@ -84,6 +87,7 @@ /qapi/qapi-visit-crypto.[ch] /qapi/qapi-visit-introspect.[ch] /qapi/qapi-visit-migration.[ch] +/qapi/qapi-visit-misc.[ch] /qapi/qapi-visit-net.[ch] /qapi/qapi-visit-rocker.[ch] /qapi/qapi-visit-run-state.[ch] -- 2.14.3 _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxxx https://lists.xenproject.org/mailman/listinfo/xen-devel

©2013 Xen Project, A Linux Foundation Collaborative Project. All Rights Reserved.
Linux Foundation is a registered trademark of The Linux Foundation.
Xen Project is a trademark of The Linux Foundation.

[Xen-devel] [PULL v2 25/30] qapi: Empty out qapi-schema.json