|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [RFC PATCH 06/12] hvmloader: add basic Q35 support
This patch does following:
1. Move PCI-device specific initialization out of pci_setup function
to the newly created class_specific_pci_device_setup function to simplify
code.
2. PCI-device specific initialization extended with LPC controller
initialization
3. Initialize PIRQA...{PIRQD, PIRQH} routing accordingly to the emulated
south bridge (either located on PCI_ISA_DEVFN or PCI_ICH9_LPC_DEVFN).
Signed-off-by: Alexey Gerasimenko <x1917x@xxxxxxxxx>
---
tools/firmware/hvmloader/config.h | 1 +
tools/firmware/hvmloader/pci.c | 162 ++++++++++++++++++++++++--------------
2 files changed, 104 insertions(+), 59 deletions(-)
diff --git a/tools/firmware/hvmloader/config.h
b/tools/firmware/hvmloader/config.h
index 6e00413f2e..6fde6b7b60 100644
--- a/tools/firmware/hvmloader/config.h
+++ b/tools/firmware/hvmloader/config.h
@@ -52,6 +52,7 @@ extern uint8_t ioapic_version;
#define PCI_ISA_DEVFN 0x08 /* dev 1, fn 0 */
#define PCI_ISA_IRQ_MASK 0x0c20U /* ISA IRQs 5,10,11 are PCI connected */
+#define PCI_ICH9_LPC_DEVFN 0xf8 /* dev 31, fn 0 */
/* MMIO hole: Hardcoded defaults, which can be dynamically expanded. */
#define PCI_MEM_END 0xfc000000
diff --git a/tools/firmware/hvmloader/pci.c b/tools/firmware/hvmloader/pci.c
index 0b708bf578..033bd20992 100644
--- a/tools/firmware/hvmloader/pci.c
+++ b/tools/firmware/hvmloader/pci.c
@@ -35,6 +35,7 @@ unsigned long pci_mem_end = PCI_MEM_END;
uint64_t pci_hi_mem_start = 0, pci_hi_mem_end = 0;
enum virtual_vga virtual_vga = VGA_none;
+uint32_t vga_devfn = 256;
unsigned long igd_opregion_pgbase = 0;
/* Check if the specified range conflicts with any reserved device memory. */
@@ -76,14 +77,93 @@ static int find_next_rmrr(uint32_t base)
return next_rmrr;
}
+#define SCI_EN_IOPORT (ACPI_PM1A_EVT_BLK_ADDRESS_V1 + 0x30)
+#define GBL_SMI_EN (1 << 0)
+#define APMC_EN (1 << 5)
+
+static void class_specific_pci_device_setup(uint16_t vendor_id,
+ uint16_t device_id,
+ uint8_t bus, uint8_t devfn)
+{
+ uint16_t class;
+
+ class = pci_readw(devfn, PCI_CLASS_DEVICE);
+
+ switch ( class )
+ {
+ case 0x0300:
+ /* If emulated VGA is found, preserve it as primary VGA. */
+ if ( (vendor_id == 0x1234) && (device_id == 0x1111) )
+ {
+ vga_devfn = devfn;
+ virtual_vga = VGA_std;
+ }
+ else if ( (vendor_id == 0x1013) && (device_id == 0xb8) )
+ {
+ vga_devfn = devfn;
+ virtual_vga = VGA_cirrus;
+ }
+ else if ( virtual_vga == VGA_none )
+ {
+ vga_devfn = devfn;
+ virtual_vga = VGA_pt;
+ if ( vendor_id == 0x8086 )
+ {
+ igd_opregion_pgbase = mem_hole_alloc(IGD_OPREGION_PAGES);
+ /*
+ * Write the the OpRegion offset to give the opregion
+ * address to the device model. The device model will trap
+ * and map the OpRegion at the give address.
+ */
+ pci_writel(vga_devfn, PCI_INTEL_OPREGION,
+ igd_opregion_pgbase << PAGE_SHIFT);
+ }
+ }
+ break;
+
+ case 0x0680:
+ /* PIIX4 ACPI PM. Special device with special PCI config space. */
+ ASSERT((vendor_id == 0x8086) && (device_id == 0x7113));
+ pci_writew(devfn, 0x20, 0x0000); /* No smb bus IO enable */
+ pci_writew(devfn, 0xd2, 0x0000); /* No smb bus IO enable */
+ pci_writew(devfn, 0x22, 0x0000);
+ pci_writew(devfn, 0x3c, 0x0009); /* Hardcoded IRQ9 */
+ pci_writew(devfn, 0x3d, 0x0001);
+ pci_writel(devfn, 0x40, ACPI_PM1A_EVT_BLK_ADDRESS_V1 | 1);
+ pci_writeb(devfn, 0x80, 0x01); /* enable PM io space */
+ break;
+
+ case 0x0601:
+ /* LPC bridge */
+ if (vendor_id == 0x8086 && device_id == 0x2918)
+ {
+ pci_writeb(devfn, 0x3c, 0x09); /* Hardcoded IRQ9 */
+ pci_writeb(devfn, 0x3d, 0x01);
+ pci_writel(devfn, 0x40, ACPI_PM1A_EVT_BLK_ADDRESS_V1 | 1);
+ pci_writeb(devfn, 0x44, 0x80); /* enable PM io space */
+ outl(SCI_EN_IOPORT, inl(SCI_EN_IOPORT) | GBL_SMI_EN | APMC_EN);
+ }
+ break;
+
+ case 0x0101:
+ if ( vendor_id == 0x8086 )
+ {
+ /* Intel ICHs since PIIX3: enable IDE legacy mode. */
+ pci_writew(devfn, 0x40, 0x8000); /* enable IDE0 */
+ pci_writew(devfn, 0x42, 0x8000); /* enable IDE1 */
+ }
+ break;
+ }
+}
+
void pci_setup(void)
{
uint8_t is_64bar, using_64bar, bar64_relocate = 0;
uint32_t devfn, bar_reg, cmd, bar_data, bar_data_upper;
uint64_t base, bar_sz, bar_sz_upper, mmio_total = 0;
- uint32_t vga_devfn = 256;
- uint16_t class, vendor_id, device_id;
+ uint16_t vendor_id, device_id;
unsigned int bar, pin, link, isa_irq;
+ int is_running_on_q35 = 0;
/* Resources assignable to PCI devices via BARs. */
struct resource {
@@ -130,13 +210,28 @@ void pci_setup(void)
if ( s )
mmio_hole_size = strtoll(s, NULL, 0);
+ /* check if we are on Q35 and set the flag if it is the case */
+ is_running_on_q35 = get_pc_machine_type() == MACHINE_TYPE_Q35;
+
/* Program PCI-ISA bridge with appropriate link routes. */
isa_irq = 0;
for ( link = 0; link < 4; link++ )
{
do { isa_irq = (isa_irq + 1) & 15;
} while ( !(PCI_ISA_IRQ_MASK & (1U << isa_irq)) );
- pci_writeb(PCI_ISA_DEVFN, 0x60 + link, isa_irq);
+
+ if (is_running_on_q35)
+ {
+ pci_writeb(PCI_ICH9_LPC_DEVFN, 0x60 + link, isa_irq);
+
+ /* PIRQE..PIRQH are unused */
+ pci_writeb(PCI_ICH9_LPC_DEVFN, 0x68 + link, 0x80);
+ }
+ else
+ {
+ pci_writeb(PCI_ISA_DEVFN, 0x60 + link, isa_irq);
+ }
+
printf("PCI-ISA link %u routed to IRQ%u\n", link, isa_irq);
}
@@ -147,66 +242,13 @@ void pci_setup(void)
/* Scan the PCI bus and map resources. */
for ( devfn = 0; devfn < 256; devfn++ )
{
- class = pci_readw(devfn, PCI_CLASS_DEVICE);
vendor_id = pci_readw(devfn, PCI_VENDOR_ID);
device_id = pci_readw(devfn, PCI_DEVICE_ID);
if ( (vendor_id == 0xffff) && (device_id == 0xffff) )
continue;
- ASSERT((devfn != PCI_ISA_DEVFN) ||
- ((vendor_id == 0x8086) && (device_id == 0x7000)));
-
- switch ( class )
- {
- case 0x0300:
- /* If emulated VGA is found, preserve it as primary VGA. */
- if ( (vendor_id == 0x1234) && (device_id == 0x1111) )
- {
- vga_devfn = devfn;
- virtual_vga = VGA_std;
- }
- else if ( (vendor_id == 0x1013) && (device_id == 0xb8) )
- {
- vga_devfn = devfn;
- virtual_vga = VGA_cirrus;
- }
- else if ( virtual_vga == VGA_none )
- {
- vga_devfn = devfn;
- virtual_vga = VGA_pt;
- if ( vendor_id == 0x8086 )
- {
- igd_opregion_pgbase = mem_hole_alloc(IGD_OPREGION_PAGES);
- /*
- * Write the the OpRegion offset to give the opregion
- * address to the device model. The device model will trap
- * and map the OpRegion at the give address.
- */
- pci_writel(vga_devfn, PCI_INTEL_OPREGION,
- igd_opregion_pgbase << PAGE_SHIFT);
- }
- }
- break;
- case 0x0680:
- /* PIIX4 ACPI PM. Special device with special PCI config space. */
- ASSERT((vendor_id == 0x8086) && (device_id == 0x7113));
- pci_writew(devfn, 0x20, 0x0000); /* No smb bus IO enable */
- pci_writew(devfn, 0xd2, 0x0000); /* No smb bus IO enable */
- pci_writew(devfn, 0x22, 0x0000);
- pci_writew(devfn, 0x3c, 0x0009); /* Hardcoded IRQ9 */
- pci_writew(devfn, 0x3d, 0x0001);
- pci_writel(devfn, 0x40, ACPI_PM1A_EVT_BLK_ADDRESS_V1 | 1);
- pci_writeb(devfn, 0x80, 0x01); /* enable PM io space */
- break;
- case 0x0101:
- if ( vendor_id == 0x8086 )
- {
- /* Intel ICHs since PIIX3: enable IDE legacy mode. */
- pci_writew(devfn, 0x40, 0x8000); /* enable IDE0 */
- pci_writew(devfn, 0x42, 0x8000); /* enable IDE1 */
- }
- break;
- }
+ class_specific_pci_device_setup(vendor_id, device_id,
+ 0 /* virt_bus support TBD */, devfn);
/* Map the I/O memory and port resources. */
for ( bar = 0; bar < 7; bar++ )
@@ -283,7 +325,9 @@ void pci_setup(void)
{
/* This is the barber's pole mapping used by Xen. */
link = ((pin - 1) + (devfn >> 3)) & 3;
- isa_irq = pci_readb(PCI_ISA_DEVFN, 0x60 + link);
+ isa_irq = pci_readb(is_running_on_q35 ?
+ PCI_ICH9_LPC_DEVFN : PCI_ISA_DEVFN,
+ 0x60 + link);
pci_writeb(devfn, PCI_INTERRUPT_LINE, isa_irq);
printf("pci dev %02x:%x INT%c->IRQ%u\n",
devfn>>3, devfn&7, 'A'+pin-1, isa_irq);
--
2.11.0
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |