[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [PATCH v3 23/39] ARM: new VGIC: Add CONFIG registers handlers
On Wed, 21 Mar 2018, Andre Przywara wrote: > The config register handlers are shared between the v2 and v3 emulation, > so their implementation goes into vgic-mmio.c, to be easily referenced > from the v3 emulation as well later. > > This is based on Linux commit 79717e4ac09c, written by Andre Przywara. > > Signed-off-by: Andre Przywara <andre.przywara@xxxxxxxxxx> > Reviewed-by: Julien Grall <julien.grall@xxxxxxx> > --- > xen/arch/arm/vgic/vgic-mmio-v2.c | 2 +- > xen/arch/arm/vgic/vgic-mmio.c | 54 > ++++++++++++++++++++++++++++++++++++++++ > xen/arch/arm/vgic/vgic-mmio.h | 7 ++++++ > 3 files changed, 62 insertions(+), 1 deletion(-) > > diff --git a/xen/arch/arm/vgic/vgic-mmio-v2.c > b/xen/arch/arm/vgic/vgic-mmio-v2.c > index d2d6a07e1b..a28d0e459b 100644 > --- a/xen/arch/arm/vgic/vgic-mmio-v2.c > +++ b/xen/arch/arm/vgic/vgic-mmio-v2.c > @@ -113,7 +113,7 @@ static const struct vgic_register_region > vgic_v2_dist_registers[] = { > vgic_mmio_read_raz, vgic_mmio_write_wi, 8, > VGIC_ACCESS_32bit | VGIC_ACCESS_8bit), > REGISTER_DESC_WITH_BITS_PER_IRQ(GICD_ICFGR, > - vgic_mmio_read_raz, vgic_mmio_write_wi, 2, > + vgic_mmio_read_config, vgic_mmio_write_config, 2, > VGIC_ACCESS_32bit), > REGISTER_DESC_WITH_LENGTH(GICD_SGIR, > vgic_mmio_read_raz, vgic_mmio_write_wi, 4, > diff --git a/xen/arch/arm/vgic/vgic-mmio.c b/xen/arch/arm/vgic/vgic-mmio.c > index 14b69d80d4..5bcb02e8c6 100644 > --- a/xen/arch/arm/vgic/vgic-mmio.c > +++ b/xen/arch/arm/vgic/vgic-mmio.c > @@ -419,6 +419,60 @@ void vgic_mmio_write_priority(struct vcpu *vcpu, > } > } > > +unsigned long vgic_mmio_read_config(struct vcpu *vcpu, > + paddr_t addr, unsigned int len) > +{ > + uint32_t intid = VGIC_ADDR_TO_INTID(addr, 2); > + uint32_t value = 0; > + int i; > + > + for ( i = 0; i < len * 4; i++ ) > + { > + struct vgic_irq *irq = vgic_get_irq(vcpu->domain, vcpu, intid + i); > + > + if ( irq->config == VGIC_CONFIG_EDGE ) > + value |= (2U << (i * 2)); same question Everything else looks good > + vgic_put_irq(vcpu->domain, irq); > + } > + > + return value; > +} > + > +void vgic_mmio_write_config(struct vcpu *vcpu, > + paddr_t addr, unsigned int len, > + unsigned long val) > +{ > + uint32_t intid = VGIC_ADDR_TO_INTID(addr, 2); > + int i; > + unsigned long flags; > + > + for ( i = 0; i < len * 4; i++ ) > + { > + struct vgic_irq *irq; > + > + /* > + * The configuration cannot be changed for SGIs in general, > + * for PPIs this is IMPLEMENTATION DEFINED. The arch timer > + * code relies on PPIs being level triggered, so we also > + * make them read-only here. > + */ > + if ( intid + i < VGIC_NR_PRIVATE_IRQS ) > + continue; > + > + irq = vgic_get_irq(vcpu->domain, vcpu, intid + i); > + spin_lock_irqsave(&irq->irq_lock, flags); > + > + if ( test_bit(i * 2 + 1, &val) ) > + irq->config = VGIC_CONFIG_EDGE; > + else > + irq->config = VGIC_CONFIG_LEVEL; > + > + spin_unlock_irqrestore(&irq->irq_lock, flags); > + vgic_put_irq(vcpu->domain, irq); > + } > +} > + > static int match_region(const void *key, const void *elt) > { > const unsigned int offset = (unsigned long)key; > diff --git a/xen/arch/arm/vgic/vgic-mmio.h b/xen/arch/arm/vgic/vgic-mmio.h > index b2d572d562..3566cf237c 100644 > --- a/xen/arch/arm/vgic/vgic-mmio.h > +++ b/xen/arch/arm/vgic/vgic-mmio.h > @@ -126,6 +126,13 @@ void vgic_mmio_write_priority(struct vcpu *vcpu, > paddr_t addr, unsigned int len, > unsigned long val); > > +unsigned long vgic_mmio_read_config(struct vcpu *vcpu, > + paddr_t addr, unsigned int len); > + > +void vgic_mmio_write_config(struct vcpu *vcpu, > + paddr_t addr, unsigned int len, > + unsigned long val); > + > unsigned int vgic_v2_init_dist_iodev(struct vgic_io_device *dev); > > #endif > -- > 2.14.1 > _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxxx https://lists.xenproject.org/mailman/listinfo/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |