|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] Xen-4.10 Domain-0 crashes at bootup
On Wed, 4 Apr 2018, Ajay Garg wrote: > Since I failed to get a single reply on my original issue as per > https://lists.xenproject.org/archives/html/minios-devel/2018-04/msg00004.html, > so I had no option but to try on a newer xen version. > > So, I created a new virtualbox-guest, and followed the steps as per > https://blog.werk21.de/en/2018/02/08/build-xen-hypervisor-410-and-xen-tools-ubuntu-1604-pvh > > Now, when start the guest with Xen-hypervisor enabled, it does not come up. > I took serial-logs at bootup time, they are as follows : > > ############################################################################# > Xen 4.10.1-pre > (XEN) Xen version 4.10.1-pre (ajay@) (gcc (Ubuntu > 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609) debug=n Wed Apr 4 12:54:58 > IST 2018 > (XEN) Latest ChangeSet: Tue Mar 20 14:23:14 2018 +0100 git:0f92968 > (XEN) Bootloader: GRUB 2.02~beta2-36ubuntu3.17 > (XEN) Command line: placeholder console=com1 com1=115200,8n1 > loglvl=all guest_loglvl=all > (XEN) Xen image load base address: 0 > (XEN) Video information: > (XEN) VGA is text mode 80x25, font 8x16 > (XEN) Disc information: > (XEN) Found 1 MBR signatures > (XEN) Found 1 EDD information structures > (XEN) Xen-e820 RAM map: > (XEN) 0000000000000000 - 000000000009fc00 (usable) > (XEN) 000000000009fc00 - 00000000000a0000 (reserved) > (XEN) 00000000000f0000 - 0000000000100000 (reserved) > (XEN) 0000000000100000 - 00000000bfff0000 (usable) > (XEN) 00000000bfff0000 - 00000000c0000000 (ACPI data) > (XEN) 00000000fec00000 - 00000000fec01000 (reserved) > (XEN) 00000000fee00000 - 00000000fee01000 (reserved) > (XEN) 00000000fffc0000 - 0000000100000000 (reserved) > (XEN) New Xen image base address: 0xbf800000 > (XEN) System RAM: 3071MB (3145276kB) > (XEN) ACPI: RSDP 000E0000, 0024 (r2 VBOX ) > (XEN) ACPI: XSDT BFFF0030, 003C (r1 VBOX VBOXXSDT 1 ASL 61) > (XEN) ACPI: FACP BFFF00F0, 00F4 (r4 VBOX VBOXFACP 1 ASL 61) > (XEN) ACPI: DSDT BFFF0470, 21FF (r2 VBOX VBOXBIOS 2 INTL 20160108) > (XEN) ACPI: FACS BFFF0200, 0040 > (XEN) ACPI: APIC BFFF0240, 0054 (r2 VBOX VBOXAPIC 1 ASL 61) > (XEN) ACPI: SSDT BFFF02A0, 01CC (r1 VBOX VBOXCPUT 2 INTL 20160108) > (XEN) No NUMA configuration found > (XEN) Faking a node at 0000000000000000-00000000bfff0000 > (XEN) Domain heap initialised > (XEN) CPU Vendor: Intel, Family 6 (0x6), Model 142 (0x8e), Stepping 9 > (raw 000806e9) > (XEN) found SMP MP-table at 0009fff0 > (XEN) DMI 2.5 present. > (XEN) Using APIC driver default > (XEN) ACPI: PM-Timer IO Port: 0x4008 (32 bits) > (XEN) ACPI: SLEEP INFO: pm1x_cnt[1:4004,1:0], pm1x_evt[1:4000,1:0] > (XEN) ACPI: wakeup_vec[bfff020c], vec_size[20] > (XEN) ACPI: Local APIC address 0xfee00000 > (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > (XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) > (XEN) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > (XEN) ACPI: IRQ0 used by override. > (XEN) ACPI: IRQ2 used by override. > (XEN) ACPI: IRQ9 used by override. > (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs > (XEN) ERST table was not found > (XEN) Using ACPI (MADT) for SMP configuration information > (XEN) SMP: Allowing 1 CPUs (0 hotplug CPUs) > (XEN) IRQ limits: 24 GSI, 184 MSI/MSI-X > (XEN) Not enabling x2APIC: depends on iommu_supports_eim. > (XEN) xstate: size: 0x440 and states: 0x7 > (XEN) CPU0: No MCE banks present. Machine check support disabled > (XEN) Speculative mitigation facilities: > (XEN) Compiled-in support: INDIRECT_THUNK > (XEN) BTI mitigations: Thunk RETPOLINE, Others: RSB_NATIVE RSB_VMEXIT > (XEN) Using scheduler: SMP Credit Scheduler (credit) > (XEN) Platform timer is 3.579MHz ACPI PM Timer > (XEN) Detected 2712.035 MHz processor. > (XEN) Initing memory sharing. > (XEN) alt table ffff82d080421798 -> ffff82d080423244 > (XEN) I/O virtualisation disabled > (XEN) nr_sockets: 1 > (XEN) ENABLING IO-APIC IRQs > (XEN) -> Using new ACK method > (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 > (XEN) Allocated console ring of 16 KiB. > (XEN) Brought up 1 CPUs > (XEN) build-id: 0734050809e0cb9f52e65322a0d3911d082e348b > (XEN) CPUIDLE: disabled due to no HPET. Force enable with 'cpuidle'. > (XEN) ACPI sleep modes: S3 > (XEN) VPMU: disabled > (XEN) xenoprof: Initialization failed. Intel processor family 6 model > 142 is not supported > (XEN) Dom0 has maximum 208 PIRQs > (XEN) NX (Execute Disable) protection active > (XEN) *** LOADING DOMAIN 0 *** > (XEN) Xen kernel: 64-bit, lsb, compat32 > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x2957000 > (XEN) PHYSICAL MEMORY ARRANGEMENT: > (XEN) Dom0 alloc.: 00000000b4000000->00000000b8000000 (715309 pages > to be allocated) > (XEN) Init. ramdisk: 00000000bc915000->00000000bf7ffed9 > (XEN) VIRTUAL MEMORY ARRANGEMENT: > (XEN) Loaded kernel: ffffffff81000000->ffffffff82957000 > (XEN) Init. ramdisk: 0000000000000000->0000000000000000 > (XEN) Phys-Mach map: 0000008000000000->00000080005ac8c0 > (XEN) Start info: ffffffff82957000->ffffffff829574b4 > (XEN) Xenstore ring: 0000000000000000->0000000000000000 > (XEN) Console ring: 0000000000000000->0000000000000000 > (XEN) Page tables: ffffffff82958000->ffffffff82971000 > (XEN) Boot stack: ffffffff82971000->ffffffff82972000 > (XEN) TOTAL: ffffffff80000000->ffffffff82c00000 > (XEN) ENTRY ADDRESS: ffffffff824a4180 > (XEN) Dom0 has maximum 1 VCPUs > (XEN) Initial low memory virq threshold set at 0x4000 pages. > (XEN) Scrubbing Free RAM on 1 nodes using 1 CPUs > (XEN) ........................done. > (XEN) Std. Loglevel: All > (XEN) Guest Loglevel: All > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch > input to Xen) > (XEN) Freed 468kB init memory > mapping kernel into physical memory > about to get started... > (XEN) d0v0 Unhandled invalid opcode fault/trap [#6, ec=ffffffff] > (XEN) domain_crash_sync called from entry.S: fault at ffff82d08035501f > x86_64/entry.S#create_bounce_frame+0x135/0x166 > (XEN) Domain 0 (vcpu#0) crashed on cpu#0: > (XEN) ----[ Xen-4.10.1-pre x86_64 debug=n Not tainted ]---- > (XEN) CPU: 0 > (XEN) RIP: e033:[<ffffffff824b49cd>] > (XEN) RFLAGS: 0000000000000286 EM: 1 CONTEXT: pv guest (d0v0) > (XEN) rax: 0000000000000029 rbx: 000000000000000a rcx: ffffffff822611c8 > (XEN) rdx: 0000000000000000 rsi: 0000000000000000 rdi: 0000000000000000 > (XEN) rbp: ffffffff82203e00 rsp: ffffffff82203d68 r8: 657661656c20676e > (XEN) r9: 0000000000000007 r10: ffffffff82203d84 r11: 0000000000000029 > (XEN) r12: 0000000000000100 r13: 0000000000000340 r14: 0000000000000440 > (XEN) r15: ffffffff82203dc0 cr0: 0000000080050033 cr4: 00000000000406a0 > (XEN) cr3: 00000000b620a000 cr2: 0000000000000000 > (XEN) fsb: 0000000000000000 gsb: ffffffff82480000 gss: 0000000000000000 > (XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: e02b cs: e033 > (XEN) Guest stack trace from rsp=ffffffff82203d68: > (XEN) ffffffff822611c8 0000000000000029 ffffffff824b49cd 000000010000e030 > (XEN) 0000000000010086 ffffffff82203da0 000000000000e02b 0000044000000007 > (XEN) 0000000000000340 0000000000000020 ffffffff82203df0 0000024000000100 > (XEN) 0000000000000000 a6f6a292a6f6a200 ffffffff82203e28 ffffffff81e08d80 > (XEN) 0000000000000000 0000000000000000 0000000000000000 ffffffff82203e60 > (XEN) ffffffff824b4342 ffffffff82203e28 ffffffff8101f2a6 ffffffff82203e28 > (XEN) ffffffff81040900 ffffffff81040ae2 00000800000806e9 0789dbf5def82203 > (XEN) a6f6a292a6f6a200 0000000000000018 ffffffff82203e78 ffffffff82203e88 > (XEN) ffffffff824b56b0 ffffffff824b56b0 0000000001000000 ffffffff82203f00 > (XEN) ffffffff82203ef0 ffffffff824b07aa ffffffff00000010 ffffffff82203f00 > (XEN) ffffffff82203eb8 a6f6a292a6f6a200 ffffffff82203e68 a6f6a292a6f6a200 > (XEN) ffffffff82203f60 ffffffff82203f5c 0000000000000000 0000000000000000 > (XEN) 0000000000000000 ffffffff82203f30 ffffffff824a4d0c a6f6a292a6f6a200 > (XEN) 0000000000000000 ffffffff82203f60 ffffffff82203f5c 0000000000000000 > (XEN) 0000000000000000 ffffffff82203f40 ffffffff824a42d5 ffffffff82203ff8 > (XEN) ffffffff824ad145 000806e900000000 0000000100000800 0300000100000032 > (XEN) 0000000000000005 0000000000000000 0000000000000000 0000000000000000 > (XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > (XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > (XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > (XEN) Hardware Dom0 crashed: rebooting machine in 5 seconds. > (XEN) Resetting with ACPI MEMORY or I/O RESET_REG. > ############################################################################# > > > One thing is for sure, that there is no virtualization-related issue, > as xen-dom0 is starting in PV mode only. It is a kernel problem under some compile conditions. See for example https://lists.xenproject.org/archives/html/xen-devel/2018-02/msg00010.html and the patch at https://lists.xenproject.org/archives/html/xen-devel/2018-02/msg00045.html Michael Young _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxxx https://lists.xenproject.org/mailman/listinfo/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |