|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [xen-unstable-smoke test] 121953: regressions - FAIL
flight 121953 xen-unstable-smoke real [real] http://logs.test-lab.xenproject.org/osstest/logs/121953/ Regressions :-( Tests which did not succeed and are blocking, including tests which could not be run: build-arm64-xsm 6 xen-build fail REGR. vs. 121876 build-armhf 6 xen-build fail REGR. vs. 121876 Tests which did not succeed, but are not blocking: test-armhf-armhf-xl 1 build-check(1) blocked n/a test-arm64-arm64-xl-xsm 1 build-check(1) blocked n/a test-amd64-amd64-libvirt 13 migrate-support-check fail never pass version targeted for testing: xen 18d12056ccea435dca7fcbe2085fff15bca19046 baseline version: xen 451004603247205467ec34b366b4cfa3814a5d95 Last test of basis 121876 2018-04-05 10:04:25 Z 0 days Failing since 121889 2018-04-05 13:02:10 Z 0 days 6 attempts Testing same since 121920 2018-04-05 19:01:57 Z 0 days 4 attempts ------------------------------------------------------------ People who touched revisions under test: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> George Dunlap <george.dunlap@xxxxxxxxxx> Jan Beulich <jbeulich@xxxxxxxx> Juergen Gross <jgross@xxxxxxxx> Julien Grall <julien.grall@xxxxxxx> Kevin Tian <kevin.tian@xxxxxxxxx> Wei Liu <wei.liu2@xxxxxxxxxx> jobs: build-arm64-xsm fail build-amd64 pass build-armhf fail build-amd64-libvirt pass test-armhf-armhf-xl blocked test-arm64-arm64-xl-xsm blocked test-amd64-amd64-xl-qemuu-debianhvm-i386 pass test-amd64-amd64-libvirt pass ------------------------------------------------------------ sg-report-flight on osstest.test-lab.xenproject.org logs: /home/logs/logs images: /home/logs/images Logs, config files, etc. are available at http://logs.test-lab.xenproject.org/osstest/logs Explanation of these reports, and of osstest in general, is at http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README.email;hb=master http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README;hb=master Test harness code can be found at http://xenbits.xen.org/gitweb?p=osstest.git;a=summary Not pushing. ------------------------------------------------------------ commit 18d12056ccea435dca7fcbe2085fff15bca19046 Author: Julien Grall <julien.grall@xxxxxxx> Date: Wed Feb 21 13:46:25 2018 +0000 xen/pdx: Introduce helper to convert MFN <-> PDX This will avoid use of pfn_to_pdx(mfn_x(mfn)) over the code base. Signed-off-by: Julien Grall <julien.grall@xxxxxxx> Reviewed-by: Wei Liu <wei.liu2@xxxxxxxxxx> Acked-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> commit cf2239a6288c7095583d3351f5024ab8c1e37f87 Author: Julien Grall <julien.grall@xxxxxxx> Date: Wed Feb 21 13:46:24 2018 +0000 xen/x86: mm: Switch x86/mm.c to use typesafe for virt_to_mfn No functional change intended. While we are here, use PFN_DOWN() rather than open coding it. Signed-off Julien Grall <julien.grall@xxxxxxx> Acked-by: Jan Beulich <jbeulich@xxxxxxxx> commit da588a0dbe76c52fdfd90582bf560643a1f9eb20 Author: Julien Grall <julien.grall@xxxxxxx> Date: Wed Feb 21 13:46:24 2018 +0000 xen/x86: Remove unused override of page_to_mfn/mfn_to_page A few files override page_to_mfn/mfn_to_page but actually never use those macros. So drop them. Signed-off-by: Julien Grall <julien.grall@xxxxxxx> Acked-by: George Dunlap <george.dunlap@xxxxxxxxxx> Acked-by: Jan Beulich <jbeulich@xxxxxxxx> commit acf92c83b58e404374300397801deb80fb8d883e Author: Wei Liu <wei.liu2@xxxxxxxxxx> Date: Fri Mar 9 17:20:14 2018 +0000 x86/mm: skip incrementing mfn if it is not a valid mfn In a follow-up patch, some callers will be switched to pass INVALID_MFN instead of zero for non-present mappings. So skip incrementing mfn if it is not a valid one. Signed-off-by: Wei Liu <wei.liu2@xxxxxxxxxx> Signed-off-by: Julien Grall <julien.grall@xxxxxxx> Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx> commit 454efb2a31b64b98e3dd55c083ce41b87375faa6 Author: Jan Beulich <JBeulich@xxxxxxxx> Date: Mon Mar 19 07:40:12 2018 -0600 x86/XPTI: reduce .text.entry This exposes less code pieces and at the same time reduces the range covered from slightly above 3 pages to a little below 2 of them. The code being moved is unchanged, except for the removal of trailing blanks, insertion of blanks between operands, and a pointless q suffix from "retq". A few more small pieces could be moved, but it seems better to me to leave them where they are to not make it overly hard to follow code paths. Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Reviewed-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> commit 442b303cdaf7d774c0be8096fe5dbab68701abd3 Author: Jan Beulich <JBeulich@xxxxxxxx> Date: Mon Mar 19 07:39:04 2018 -0600 x86: log XPTI enabled status At the same time also report the state of the two defined ARCH_CAPABILITIES MSR bits. To avoid further complicating the conditional around that printk(), drop it (it's a debug level one only anyway). Issue the main message without any XENLOG_*, and also drop XENLOG_INFO from the respective BTI message, to make sure they're visible at default log level also in release builds. Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Tested-by: Juergen Gross <jgross@xxxxxxxx> Reviewed-by: Juergen Gross <jgross@xxxxxxxx> Reviewed-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Reviewed-by: Wei Liu <wei.liu2@xxxxxxxxxx> commit bee0732d2066691d8204e418d10110930ee4d4f8 Author: Jan Beulich <JBeulich@xxxxxxxx> Date: Mon Mar 19 07:37:54 2018 -0600 x86: disable XPTI when RDCL_NO Use the respective ARCH_CAPABILITIES MSR bit, but don't expose the MSR to guests yet. Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Tested-by: Juergen Gross <jgross@xxxxxxxx> Reviewed-by: Juergen Gross <jgross@xxxxxxxx> Reviewed-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Acked-by: Wei Liu <wei.liu2@xxxxxxxxxx> commit c0d98b35714fb707217c9062b6518e158cd72eea Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Date: Thu Jan 25 15:45:37 2018 +0000 x86/vtx: Introduce a typed union for CR access exit information This reduces code volume, and has a minor improvement on compiled size, probably due to the removal of several temporary variables. add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-50 (-50) function old new delta vmx_vmexit_handler 6881 6878 -3 nvmx_n2_vmexit_handler 3473 3426 -47 Take the opportunity to make some style corrections, and add some ASSERT_UNREACHABLE()s in appropriate places. No functional change. Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Acked-by: Kevin Tian <kevin.tian@xxxxxxxxx> commit 36bc5fc631b08bcf03c6977e79f026a459d76302 Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Date: Fri Mar 16 16:57:18 2018 +0000 xen/public: Rename xen_domctl_createdomain.config to arch This is a tools only hypercall so fine to change. Altering the name avoids having confusing code such as config->config all over the hypervisor and toolstack. Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Acked-by: Jan Beulich <jbeulich@xxxxxxxx> Acked-by: Julien Grall <julien.grall@xxxxxxx> Acked-by: Wei Liu <wei.liu2@xxxxxxxxxx> commit 2649612686f968a52ce53d173f5c2a3088ad17dd Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Date: Fri Mar 9 13:03:26 2018 +0000 tools/libxl: Don't prepare or save xc_config when soft resetting a domain xc_config is only used by xc_domain_create(), but by calling libxl__arch_domain_{prepare,save}_config() we clobber the real settings with the default settings. Move all data and calls relating to xc_domain_create() into the path which calls it. As far as I can tell, soft_reset has always been broken for ARM domains using LIBXL_GIC_VERSION_DEFAULT, which elicits a hard error out of libxl__arch_domain_save_config(), and only works on x86 because this function is a no-op. Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Reviewed-by: Roger Pau Monné <roger.pau@xxxxxxxxxx> Acked-by: Wei Liu <wei.liu2@xxxxxxxxxx> commit 74fd984ae699727ae98f4fc36450ff76c8fc7ff3 Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Date: Fri Mar 9 12:24:13 2018 +0000 tools/libxl: Drop xc_domain_configuration_t from libxl__domain_build_state The data it stores is initialised and exclusively used within libxl__domain_make(), with the important details written back elsewhere by libxl__arch_domain_save_config(). Prepare xc_config on libxl__domain_make()'s stack, and drop the parameter. Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Reviewed-by: Roger Pau Monné <roger.pau@xxxxxxxxxx> Acked-by: Wei Liu <wei.liu2@xxxxxxxxxx> (qemu changes not included) _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxxx https://lists.xenproject.org/mailman/listinfo/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |