[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [cubieboard2] Bringing up dom0



On 28/04/18 18:12, Ajay Garg wrote:
Hi All.

We have brought up the cubieboard2 from almost scratch, following are the steps done :

<snip>

== getting xen ready ==

i)
Compiled xen on cubieboard itself, via :

   * git clone git://xenbits.xen.org/xen.git
   * cd xen
.  * ./configure --libdir=/usr/lib
   * make debball CONFIG_EARLY_PRINTK=sun7i -j4
   * sudo dpkg -i dist/xen-upstream-4.11-unstable.deb
   * sudo reboot

ii)
Upon reboot, "sudo xl list" gives following :

##################################################################
debian@debian-armhf:~$ sudo  xl list
[sudo] password for debian:
xencall: error: Could not obtain handle on privileged command interface: No such file or directory
libxl: error: libxl.c:102:libxl_ctx_alloc: cannot open libxc handle: No such file or directory
cannot init xl context
##################################################################

This means that /dev/xen/privcmd (or the legacy /proc/xen/privcmd) device isn't available.

First check that you have actually booted Xen with Linux as dom0.  You don't show any logs in this final section, and simply installing the debball and rebooting won't typically cause Xen to be the head of the boot list.

Beyond that, double check your Linux kernel configuration options when it comes to Xen support.

~Andrew
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.