[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH v1 1/2] x86/mm: Add mem access rights to NPT



>>> On 30.05.18 at 11:04, <aisaila@xxxxxxxxxxxxxxx> wrote:
> Sorry for the misunderstanding, I wanted to clarify if the 59:56 bits
> are fully ok to be used or if not then where should I use 4 bits to
> store the mem access info?

I thought I had sufficiently explained this - you have two options:
1) Make sure (via some prereq patch(es)) bit 59 has no other use, and
   then use 59:56.
2) Use another range that's provably having no other use, e.g.
   58:55.

Jan



_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.