|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH 16/18] xen/arm: Save/restore context on suspend/resume
The context of CPU general purpose and system control registers
has to be saved on suspend and restored on resume. This is
implemented in hyp_suspend and before the return from hyp_resume
function. The hyp_suspend is invoked just before the PSCI system
suspend call is issued to the ATF. The hyp_suspend has to return a
non-zero value so that the calling 'if' statement evaluates to true,
causing the system suspend to be invoked. Upon the resume, context
saved on suspend will be restored, including the link register.
Therefore, after restoring the context the control flow will
return to the address pointed by the saved link register, which
is the place from which the hyp_suspend was called. To ensure
that the calling 'if' statement doesn't again evaluate to true
and initiate system suspend, hyp_resume has to return a zero value
after restoring the context.
Note that the order of saving register context into cpu_context
structure has to match the order of restoring.
Since the suspend/resume is supported only for arm64, we define
a null cpu_context structure so arm32 could compile.
Signed-off-by: Mirela Simonovic <mirela.simonovic@xxxxxxxxxx>
Signed-off-by: Saeed Nowshadi <saeed.nowshadi@xxxxxxxxxx>
---
xen/arch/arm/arm64/entry.S | 89 ++++++++++++++++++++++++++++++++++++++++++-
xen/arch/arm/suspend.c | 28 ++++++++++++--
xen/include/asm-arm/suspend.h | 22 +++++++++++
3 files changed, 135 insertions(+), 4 deletions(-)
diff --git a/xen/arch/arm/arm64/entry.S b/xen/arch/arm/arm64/entry.S
index 5efa30e8ee..861a401b18 100644
--- a/xen/arch/arm/arm64/entry.S
+++ b/xen/arch/arm/arm64/entry.S
@@ -534,6 +534,52 @@ ENTRY(__context_switch)
mov sp, x9
ret
+/*
+ * void hyp_suspend(struct cpu_context *ptr)
+ *
+ * x0 - pointer to the storage where callee's context will be saved
+ *
+ * CPU context saved here will be restored on resume in hyp_resume function.
+ * hyp_suspend shall return a non-zero value. Upon restoring context
+ * hyp_resume shall return value zero instead. From C code that invokes
+ * hyp_suspend, the return value is interpreted to determine whether the
context
+ * is saved (hyp_suspend) or restored (hyp_resume).
+ */
+ENTRY(hyp_suspend)
+ /* Store callee-saved registers */
+ stp x19, x20, [x0], #16
+ stp x21, x22, [x0], #16
+ stp x23, x24, [x0], #16
+ stp x25, x26, [x0], #16
+ stp x27, x28, [x0], #16
+ stp x29, lr, [x0], #16
+
+ /* Store stack-pointer */
+ mov x2, sp
+ str x2, [x0], #8
+
+ /* Store system control registers */
+ mrs x2, VBAR_EL2
+ str x2, [x0], #8
+ mrs x2, VTCR_EL2
+ str x2, [x0], #8
+ mrs x2, VTTBR_EL2
+ str x2, [x0], #8
+ mrs x2, TPIDR_EL2
+ str x2, [x0], #8
+ mrs x2, MDCR_EL2
+ str x2, [x0], #8
+ mrs x2, HSTR_EL2
+ str x2, [x0], #8
+ mrs x2, CPTR_EL2
+ str x2, [x0], #8
+ mrs x2, HCR_EL2
+ str x2, [x0], #8
+
+ /* hyp_suspend must return a non-zero value */
+ mov x0, #1
+ ret
+
ENTRY(hyp_resume)
msr DAIFSet, 0xf /* Disable all interrupts */
@@ -622,7 +668,48 @@ mmu_resumed:
tlbi alle2
dsb sy /* Ensure completion of TLB flush */
isb
- b .
+
+ /* Now we can access the cpu_context, so restore the context here */
+ ldr x0, =cpu_context
+
+ /* Restore callee-saved registers */
+ ldp x19, x20, [x0], #16
+ ldp x21, x22, [x0], #16
+ ldp x23, x24, [x0], #16
+ ldp x25, x26, [x0], #16
+ ldp x27, x28, [x0], #16
+ ldp x29, lr, [x0], #16
+
+ /* Restore stack pointer */
+ ldr x2, [x0], #8
+ mov sp, x2
+
+ /* Restore system control registers */
+ ldr x2, [x0], #8
+ msr VBAR_EL2, x2
+ ldr x2, [x0], #8
+ msr VTCR_EL2, x2
+ ldr x2, [x0], #8
+ msr VTTBR_EL2, x2
+ ldr x2, [x0], #8
+ msr TPIDR_EL2, x2
+ ldr x2, [x0], #8
+ msr MDCR_EL2, x2
+ ldr x2, [x0], #8
+ msr HSTR_EL2, x2
+ ldr x2, [x0], #8
+ msr CPTR_EL2, x2
+ ldr x2, [x0], #8
+ msr HCR_EL2, x2
+ isb
+
+ /* Since context is restored return from this function will appear as
+ * return from hyp_suspend. To distinguish a return from hyp_suspend
+ * which is called upon finalizing the suspend, as opposed to return
+ * from this function which executes on resume, we need to return zero
+ * value here. */
+ mov x0, #0
+ ret
/*
* Local variables:
diff --git a/xen/arch/arm/suspend.c b/xen/arch/arm/suspend.c
index 365c32ec3c..423d9c0e90 100644
--- a/xen/arch/arm/suspend.c
+++ b/xen/arch/arm/suspend.c
@@ -3,6 +3,9 @@
#include <asm/cpufeature.h>
#include <asm/event.h>
#include <asm/psci.h>
+#include <asm/suspend.h>
+
+struct cpu_context cpu_context;
/* Reset values of VCPU architecture specific registers */
static void vcpu_arch_reset(struct vcpu *v)
@@ -113,6 +116,11 @@ static void vcpu_suspend(register_t epoint, register_t cid)
_arch_set_info_guest(v, &ctxt);
}
+#ifndef CONFIG_ARM_64
+/* not supported on ARM_32 */
+int32_t hyp_suspend(struct cpu_context *ptr) { return 1; }
+#endif
+
/* Xen suspend. Note: data is not used (suspend is the suspend to RAM) */
static long system_suspend(void *data)
{
@@ -141,9 +149,23 @@ static long system_suspend(void *data)
goto resume_irqs;
}
- status = call_psci_system_suspend();
- if ( status )
- dprintk(XENLOG_ERR, "PSCI system suspend failed, err=%d\n", status);
+ if ( hyp_suspend(&cpu_context) )
+ {
+ status = call_psci_system_suspend();
+ /*
+ * If suspend is finalized properly by above system suspend PSCI call,
+ * the code below in this 'if' branch will never execute. Execution
+ * will continue from hyp_resume which is the hypervisor's resume
point.
+ * In hyp_resume CPU context will be restored and since link-register
is
+ * restored as well, it will appear to return from hyp_suspend. The
+ * difference in returning from hyp_suspend on system suspend versus
+ * resume is in function's return value: on suspend, the return value
is
+ * a non-zero value, on resume it is zero. That is why the control flow
+ * will not re-enter this 'if' branch on resume.
+ */
+ if ( status )
+ dprintk(XENLOG_ERR, "PSCI system suspend failed, err=%d\n",
status);
+ }
system_state = SYS_STATE_resume;
diff --git a/xen/include/asm-arm/suspend.h b/xen/include/asm-arm/suspend.h
index 7604e2e2e2..a39071566a 100644
--- a/xen/include/asm-arm/suspend.h
+++ b/xen/include/asm-arm/suspend.h
@@ -1,8 +1,30 @@
#ifndef __ASM_ARM_SUSPEND_H__
#define __ASM_ARM_SUSPEND_H__
+#ifdef CONFIG_ARM_64
+struct cpu_context {
+ uint64_t callee_regs[12];
+ uint64_t sp;
+ uint64_t vbar_el2;
+ uint64_t vtcr_el2;
+ uint64_t vttbr_el2;
+ uint64_t tpidr_el2;
+ uint64_t mdcr_el2;
+ uint64_t hstr_el2;
+ uint64_t cptr_el2;
+ uint64_t hcr_el2;
+} __aligned(16);
+#else
+struct cpu_context {
+ uint8_t pad;
+};
+#endif
+
+extern struct cpu_context cpu_context;
+
int32_t domain_suspend(register_t epoint, register_t cid);
void hyp_resume(void);
+int32_t hyp_suspend(struct cpu_context *ptr);
#endif
--
2.13.0
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |