[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH v8 1/7] xen/pvh: Split CONFIG_XEN_PVH into CONFIG_PVH and CONFIG_XEN_PVH


  • To: Boris Ostrovsky <boris.ostrovsky@xxxxxxxxxx>, Maran Wilson <maran.wilson@xxxxxxxxxx>, x86@xxxxxxxxxx, linux-kernel@xxxxxxxxxxxxxxx, xen-devel@xxxxxxxxxxxxxxxxxxxx, kvm@xxxxxxxxxxxxxxx, jgross@xxxxxxxx
  • From: Paolo Bonzini <pbonzini@xxxxxxxxxx>
  • Date: Fri, 7 Dec 2018 00:30:44 +0100
  • Autocrypt: addr=pbonzini@xxxxxxxxxx; prefer-encrypt=mutual; keydata= xsEhBFRCcBIBDqDGsz4K0zZun3jh+U6Z9wNGLKQ0kSFyjN38gMqU1SfP+TUNQepFHb/Gc0E2 CxXPkIBTvYY+ZPkoTh5xF9oS1jqI8iRLzouzF8yXs3QjQIZ2SfuCxSVwlV65jotcjD2FTN04 hVopm9llFijNZpVIOGUTqzM4U55sdsCcZUluWM6x4HSOdw5F5Utxfp1wOjD/v92Lrax0hjiX DResHSt48q+8FrZzY+AUbkUS+Jm34qjswdrgsC5uxeVcLkBgWLmov2kMaMROT0YmFY6A3m1S P/kXmHDXxhe23gKb3dgwxUTpENDBGcfEzrzilWueOeUWiOcWuFOed/C3SyijBx3Av/lbCsHU Vx6pMycNTdzU1BuAroB+Y3mNEuW56Yd44jlInzG2UOwt9XjjdKkJZ1g0P9dwptwLEgTEd3Fo UdhAQyRXGYO8oROiuh+RZ1lXp6AQ4ZjoyH8WLfTLf5g1EKCTc4C1sy1vQSdzIRu3rBIjAvnC tGZADei1IExLqB3uzXKzZ1BZ+Z8hnt2og9hb7H0y8diYfEk2w3R7wEr+Ehk5NQsT2MPI2QBd wEv1/Aj1DgUHZAHzG1QN9S8wNWQ6K9DqHZTBnI1hUlkp22zCSHK/6FwUCuYp1zcAEQEAAc0f UGFvbG8gQm9uemluaSA8Ym9uemluaUBnbnUub3JnPsLBTQQTAQIAIwUCVEJ7AwIbAwcLCQgH AwIBBhUIAgkKCwQWAgMBAh4BAheAAAoJEH4VEAzNNmmxNcwOniaZVLsuy1lW/ntYCA0Caz0i sHpmecK8aWlvL9wpQCk4GlOX9L1emyYXZPmzIYB0IRqmSzAlZxi+A2qm9XOxs5gJ2xqMEXX5 FMtUH3kpkWWJeLqe7z0EoQdUI4EG988uv/tdZyqjUn2XJE+K01x7r3MkUSFz/HZKZiCvYuze VlS0NTYdUt5jBXualvAwNKfxEkrxeHjxgdFHjYWhjflahY7TNRmuqPM/Lx7wAuyoDjlYNE40 Z+Kun4/KjMbjgpcF4Nf3PJQR8qXI6p3so2qsSn91tY7DFSJO6v2HwFJkC2jU95wxfNmTEUZc znXahYbVOwCDJRuPrE5GKFd/XJU9u5hNtr/uYipHij01WXal2cce1S5mn1/HuM1yo1u8xdHy IupCd57EWI948e8BlhpujUCU2tzOb2iYS0kpmJ9/oLVZrOcSZCcCl2P0AaCAsj59z2kwQS9D du0WxUs8waso0Qq6tDEHo8yLCOJDzSz4oojTtWe4zsulVnWV+wu70AioemAT8S6JOtlu60C5 dHgQUD1Tp+ReXpDKXmjbASJx4otvW0qah3o6JaqO79tbDqIvncu3tewwp6c85uZd48JnIOh3 utBAu684nJakbbvZUGikJfxd887ATQRUQnHuAQgAx4dxXO6/Zun0eVYOnr5GRl76+2UrAAem Vv9Yfn2PbDIbxXqLff7oyVJIkw4WdhQIIvvtu5zH24iYjmdfbg8iWpP7NqxUQRUZJEWbx2CR wkMHtOmzQiQ2tSLjKh/cHeyFH68xjeLcinR7jXMrHQK+UCEw6jqi1oeZzGvfmxarUmS0uRuf fAb589AJW50kkQK9VD/9QC2FJISSUDnRC0PawGSZDXhmvITJMdD4TjYrePYhSY4uuIV02v02 8TVAaYbIhxvDY0hUQE4r8ZbGRLn52bEzaIPgl1p/adKfeOUeMReg/CkyzQpmyB1TSk8lDMxQ zCYHXAzwnGi8WU9iuE1P0wARAQABwsEzBBgBAgAJBQJUQnHuAhsMAAoJEH4VEAzNNmmxp1EO oJy0uZggJm7gZKeJ7iUpeX4eqUtqelUw6gU2daz2hE/jsxsTbC/w5piHmk1H1VWDKEM4bQBT uiJ0bfo55SWsUNN+c9hhIX+Y8LEe22izK3w7mRpvGcg+/ZRG4DEMHLP6JVsv5GMpoYwYOmHn plOzCXHvmdlW0i6SrMsBDl9rw4AtIa6bRwWLim1lQ6EM3PWifPrWSUPrPcw4OLSwFk0CPqC4 HYv/7ZnASVkR5EERFF3+6iaaVi5OgBd81F1TCvCX2BEyIDRZLJNvX3TOd5FEN+lIrl26xecz 876SvcOb5SL5SKg9/rCBufdPSjojkGFWGziHiFaYhbuI2E+NfWLJtd+ZvWAAV+O0d8vFFSvr iy9enJ8kxJwhC0ECbSKFY+W1eTIhMD3aeAKY90drozWEyHhENf4l/V+Ja5vOnW+gCDQkGt2Y 1lJAPPSIqZKvHzGShdh8DduC0U3xYkfbGAUvbxeepjgzp0uEnBXfPTy09JGpgWbg0w91GyfT /ujKaGd4vxG2Ei+MMNDmS1SMx7wu0evvQ5kT9NPzyq8R2GIhVSiAd2jioGuTjX6AZCFv3ToO 53DliFMkVTecLptsXaesuUHgL9dKIfvpm+rNXRn9wAwGjk0X/A==
  • Cc: thomas.lendacky@xxxxxxx, dave.hansen@xxxxxxxxxxxxxxx, rkrcmar@xxxxxxxxxx, hpa@xxxxxxxxx, mingo@xxxxxxxxxx, rdunlap@xxxxxxxxxxxxx, luto@xxxxxxxxxx, jpoimboe@xxxxxxxxxx, tglx@xxxxxxxxxxxxx, bp@xxxxxxx, kirill.shutemov@xxxxxxxxxxxxxxx, roger.pau@xxxxxxxxxx
  • Delivery-date: Thu, 06 Dec 2018 23:31:03 +0000
  • List-id: Xen developer discussion <xen-devel.lists.xenproject.org>
  • Openpgp: preference=signencrypt

On 07/12/18 00:11, Boris Ostrovsky wrote:
> On 12/6/18 5:49 PM, Paolo Bonzini wrote:
>> On 06/12/18 23:34, Boris Ostrovsky wrote:
>>> On 12/6/18 5:11 PM, Paolo Bonzini wrote:
>>>
>>>> and also
>>>>
>>>>    depends on !EFI
>>>>
>>>> because even though in principle it would be possible to write a PVH
>>>> loader for UEFI, PVH's start info does not support the EFI handover
>>>> protocol.
>>> But we should be able to build the binary with both EFI and PVH?
>> Can you?  It's a completely different binary format, the EFI handover
>> protocol is invoked via a special entry point and needs the Linux header
>> format, not ELF.
> 
> Right, but I think it is desirable to be able to build both from the
> same config file.

Ah, "make bzImage" and use the vmlinux for PVH, because PVH fetches the
entry point from the special note.  That's clever. :)

I don't see why it should not work, and if so the "depends on !EFI" is
indeed unnecessary.

Paolo


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.