[Xen-devel] [PATCH v7 08/20] xen: add PVH specific defines to offset.h

[Juergen Gross <jgross@xxxxxxxx>]

include/grub/offsets.h needs some defines for Xen PVH mode.

Add them. While at it line up the values in the surrounding lines to
start at the same column.

Signed-off-by: Juergen Gross <jgross@xxxxxxxx>
Reviewed-by: Daniel Kiper <daniel.kiper@xxxxxxxxxx>
---
V3: XENPVH->XEN_PVH (Daniel Kiper)
---
 include/grub/offsets.h | 21 ++++++++++++---------
 1 file changed, 12 insertions(+), 9 deletions(-)

diff --git a/include/grub/offsets.h b/include/grub/offsets.h
index 330e4c707..871e1cd4c 100644
--- a/include/grub/offsets.h
+++ b/include/grub/offsets.h
@@ -36,9 +36,10 @@
 #define GRUB_DECOMPRESSOR_I386_PC_MAX_DECOMPRESSOR_SIZE (0x9000-0x8200)
 
 /* The segment where the kernel is loaded.  */
-#define GRUB_BOOT_I386_PC_KERNEL_SEG   0x800
+#define GRUB_BOOT_I386_PC_KERNEL_SEG           0x800
 
-#define GRUB_KERNEL_I386_PC_LINK_ADDR  0x9000
+#define GRUB_KERNEL_I386_PC_LINK_ADDR          0x9000
+#define GRUB_KERNEL_I386_XEN_PVH_LINK_ADDR     0x100000
 
 /* The upper memory area (starting at 640 kiB).  */
 #define GRUB_MEMORY_I386_PC_UPPER              0xa0000
@@ -101,15 +102,17 @@
 #define GRUB_KERNEL_I386_MULTIBOOT_MOD_ALIGN   
GRUB_KERNEL_I386_COREBOOT_MOD_ALIGN
 
 #define GRUB_KERNEL_X86_64_XEN_MOD_ALIGN       0x8
-#define GRUB_KERNEL_I386_XEN_MOD_ALIGN 0x8
+#define GRUB_KERNEL_I386_XEN_MOD_ALIGN         0x8
+#define GRUB_KERNEL_I386_XEN_PVH_MOD_ALIGN     0x8
 
 /* Non-zero value is only needed for PowerMacs.  */
-#define GRUB_KERNEL_X86_64_XEN_MOD_GAP 0x0
-#define GRUB_KERNEL_I386_XEN_MOD_GAP 0x0
-#define GRUB_KERNEL_I386_IEEE1275_MOD_GAP 0x0
-#define GRUB_KERNEL_I386_COREBOOT_MOD_GAP 0x0
-#define GRUB_KERNEL_SPARC64_IEEE1275_MOD_GAP 0x0
-#define GRUB_KERNEL_ARM_UBOOT_MOD_GAP 0x0
+#define GRUB_KERNEL_X86_64_XEN_MOD_GAP         0x0
+#define GRUB_KERNEL_I386_XEN_MOD_GAP           0x0
+#define GRUB_KERNEL_I386_XEN_PVH_MOD_GAP       0x0
+#define GRUB_KERNEL_I386_IEEE1275_MOD_GAP      0x0
+#define GRUB_KERNEL_I386_COREBOOT_MOD_GAP      0x0
+#define GRUB_KERNEL_SPARC64_IEEE1275_MOD_GAP   0x0
+#define GRUB_KERNEL_ARM_UBOOT_MOD_GAP          0x0
 
 #define GRUB_KERNEL_POWERPC_IEEE1275_MOD_ALIGN 0x1000
 #define GRUB_KERNEL_SPARC64_IEEE1275_LOG_MOD_ALIGN 3
-- 
2.16.4


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel