|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [libvirt test] 131287: regressions - FAIL
flight 131287 libvirt real [real] http://logs.test-lab.xenproject.org/osstest/logs/131287/ Regressions :-( Tests which did not succeed and are blocking, including tests which could not be run: build-i386-libvirt 6 libvirt-build fail REGR. vs. 131219 test-amd64-amd64-libvirt-vhd 11 guest-start fail REGR. vs. 131219 Tests which did not succeed, but are not blocking: test-amd64-i386-libvirt 1 build-check(1) blocked n/a test-amd64-i386-libvirt-xsm 1 build-check(1) blocked n/a test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm 1 build-check(1) blocked n/a test-amd64-i386-libvirt-pair 1 build-check(1) blocked n/a test-armhf-armhf-libvirt-raw 13 saverestore-support-check fail like 131219 test-armhf-armhf-libvirt 14 saverestore-support-check fail like 131219 test-amd64-amd64-libvirt 13 migrate-support-check fail never pass test-amd64-amd64-libvirt-xsm 13 migrate-support-check fail never pass test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm 11 migrate-support-check fail never pass test-armhf-armhf-libvirt-raw 12 migrate-support-check fail never pass test-armhf-armhf-libvirt 13 migrate-support-check fail never pass version targeted for testing: libvirt 3972a25f1d4f9c75d73faaac9106fc16037de645 baseline version: libvirt fa30ee04a2a7205c3d664c67b88dd8df9cb1fb40 Last test of basis 131219 2018-12-11 04:19:05 Z 3 days Failing since 131256 2018-12-12 04:19:19 Z 2 days 2 attempts Testing same since 131287 2018-12-13 04:53:27 Z 1 days 1 attempts ------------------------------------------------------------ People who touched revisions under test: Daniel P. Berrangé <berrange@xxxxxxxxxx> Erik Skultety <eskultet@xxxxxxxxxx> John Ferlan <jferlan@xxxxxxxxxx> Julio Faracco <jcfaracco@xxxxxxxxx> Michal Privoznik <mprivozn@xxxxxxxxxx> Nikolay Shirokovskiy <nshirokovskiy@xxxxxxxxxxxxx> jobs: build-amd64-xsm pass build-i386-xsm pass build-amd64 pass build-armhf pass build-i386 pass build-amd64-libvirt pass build-armhf-libvirt pass build-i386-libvirt fail build-amd64-pvops pass build-armhf-pvops pass build-i386-pvops pass test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm pass test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm blocked test-amd64-amd64-libvirt-xsm pass test-amd64-i386-libvirt-xsm blocked test-amd64-amd64-libvirt pass test-armhf-armhf-libvirt pass test-amd64-i386-libvirt blocked test-amd64-amd64-libvirt-pair pass test-amd64-i386-libvirt-pair blocked test-armhf-armhf-libvirt-raw pass test-amd64-amd64-libvirt-vhd fail ------------------------------------------------------------ sg-report-flight on osstest.test-lab.xenproject.org logs: /home/logs/logs images: /home/logs/images Logs, config files, etc. are available at http://logs.test-lab.xenproject.org/osstest/logs Explanation of these reports, and of osstest in general, is at http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README.email;hb=master http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README;hb=master Test harness code can be found at http://xenbits.xen.org/gitweb?p=osstest.git;a=summary Not pushing. ------------------------------------------------------------ commit 3972a25f1d4f9c75d73faaac9106fc16037de645 Author: John Ferlan <jferlan@xxxxxxxxxx> Date: Fri Dec 7 09:46:48 2018 -0500 conf: Add check/error for domain supports cold/hotplug https://bugzilla.redhat.com/show_bug.cgi?id=1624336 Add a check during virDomainDefCompatibleDevice whether the domain supports cold/hotplug of a memory module even though this duplicates the qemuDomainDefValidateMemoryHotplug check. Without this check, the cold/hot plug would fail on the subsequent mem_memory check (since it's 0). Adding a check for max_memory > 0 would allow the subsequent hotplug check to fail, but would cause coldplug to fail with the somewhat opaque message "no free memory device slot available". Signed-off-by: John Ferlan <jferlan@xxxxxxxxxx> ACKed-by: Michal Privoznik <mprivozn@xxxxxxxxxx> commit 4f0854e7dfdd4f7206008439f3a8d15bd373a776 Author: John Ferlan <jferlan@xxxxxxxxxx> Date: Fri Dec 7 11:07:32 2018 -0500 conf: Add the size of failed max_memory in error If virDomainDefCompatibleDevice fails because there is insufficient domain def->mem.max_memory, then let's also print out that value in the error message. Signed-off-by: John Ferlan <jferlan@xxxxxxxxxx> ACKed-by: Michal Privoznik <mprivozn@xxxxxxxxxx> commit dd45c2710f6fd2d4f8a47f97960532d0e0091e7d Author: Erik Skultety <eskultet@xxxxxxxxxx> Date: Fri Dec 7 14:53:46 2018 +0100 conf: domain: gfx: Iterate over graphics devices when doing validation The QEMU validation code for graphics has been in place for a while, but because it is only executed from virDomainDeviceInfoIterateInternal, it was never run, since the iterator expects the device to have boot info which graphics don't have. The unfortunate side effect of this whole mess was that a few capabilities were missing from the test suite (as commit d8266ebe1 demonstrated with graphics-spice-invalid-egl-headless test), which in turn meant that a few graphics tests which expected a failure happily accepted any failure the test runtime returned which made them succeed. The impact of this was that we then allowed to start a domain with multiple OpenGL-enabled graphics devices. This patch enables iteration over graphics devices. Unsurprisingly, a few tests started to fail as a result, so fix those too. Signed-off-by: Erik Skultety <eskultet@xxxxxxxxxx> Reviewed-by: John Ferlan <jferlan@xxxxxxxxxx> commit 0d5244cc867155f7548e568f298799d639017698 Author: Erik Skultety <eskultet@xxxxxxxxxx> Date: Fri Dec 7 13:13:58 2018 +0100 tests: Introduce negative versions of DO_TEST_CAPS_LATEST It's fairly easy to forget to add a capability to the list of capabilities for a negative test case which might yield (for us) very unfortunate results. Therefore, introduce negative versions of DO_TEST_CAPS_LATEST macros, so that real QEMU caps can be used with tests that expect a failure too. Signed-off-by: Erik Skultety <eskultet@xxxxxxxxxx> Reviewed-by: John Ferlan <jferlan@xxxxxxxxxx> commit 88d24aaccc1e31ff1ce682f9496cf08cc7f7c216 Author: Erik Skultety <eskultet@xxxxxxxxxx> Date: Fri Dec 7 13:13:03 2018 +0100 conf: domain: Introduce virDomainDeviceIterateFlags Validation of domain devices is accomplished via a generic device iterator which takes a callback, iterates over all kinds of supported device types and invokes the callback on every single device. However, there might be cases when we need to alter the behaviour of the iteration (most notably skip or include a group of devices). Therefore, this patch introduces iterator flags. Signed-off-by: Erik Skultety <eskultet@xxxxxxxxxx> Reviewed-by: John Ferlan <jferlan@xxxxxxxxxx> commit 414c51b7a11cc52c4276c7220d0b973c57c725d6 Author: Erik Skultety <eskultet@xxxxxxxxxx> Date: Fri Dec 7 15:07:37 2018 +0100 qemu: domain: gfx: Fix shadowing of a function argument in validation Since the code was never run, it would have been very hard to spot this mistake, especially since the compiler can't really warn about it. Signed-off-by: Erik Skultety <eskultet@xxxxxxxxxx> Reviewed-by: John Ferlan <jferlan@xxxxxxxxxx> commit daf4e2abca914fd8340d2243e2cb070a43dd7149 Author: Julio Faracco <jcfaracco@xxxxxxxxx> Date: Fri Nov 30 20:43:37 2018 +0800 tests: Adding test case to include multiple network definitions. This commit includes a test case for multiple network definitions. It is useful right now, but it will be more useful when the index used by LXC version 3.X is implemented to support this new settings. The version 3.X is using indexes to specify each network settings. Signed-off-by: Julio Faracco <jcfaracco@xxxxxxxxx> ACKed-by: Michal Privoznik <mprivozn@xxxxxxxxxx> commit 53762677a84c7bf124714d9e607da8c115084775 Author: Julio Faracco <jcfaracco@xxxxxxxxx> Date: Fri Nov 30 20:43:36 2018 +0800 lxc: Initializing IPv6 and IPv4 gateway to overwrite old settings. This commit fixes a bug when you have multiple network settings defined. Basically, if you set an IPv6 or IPv4 gateway, it carries on next network settings. It is happening because the data is not being initialized when a new network type is defined. So, the old data still persists into the pointer. Another way to initialized the data was introduced using memset() to avoid missing attributes from the struct. Signed-off-by: Julio Faracco <jcfaracco@xxxxxxxxx> Reviewed-by: John Ferlan <jferlan@xxxxxxxxxx> commit 34eca98522c1bd39e18f1eceee4f888dad173e5e Author: Daniel P. Berrangé <berrange@xxxxxxxxxx> Date: Tue Dec 11 14:58:43 2018 +0000 tools: rename S_ORG to C_ORG in virt-pki-validate Rename a variable to make it clear that it holds the client organization rather than the server organization. Signed-off-by: Daniel P. Berrangé <berrange@xxxxxxxxxx> commit ecf8619430f78b8b2beeb57c239cc78f6e3907bd Author: Daniel P. Berrangé <berrange@xxxxxxxxxx> Date: Mon Dec 10 16:50:10 2018 +0000 tools: relax x509 Subject regexes to allow numbers and more The virt-pki-validate tool is extracting components in the x509 certificate Subject field. Unfortunately the regex it is is using is far too strict, and so truncating valid data. It needs to consider ',' as a field separator, and if that's not there take all data until the EOL. With the broken regex: $ echo " Subject: O=Test,CN=guestHyp1ver" | sed 's+.*CN=\(.[a-zA-Z \._-]*\).*+\1+' guestHyp And with the fixed regex $ echo "Subject: O=Test,CN=guestHyp1ver" | sed 's+.*CN=\([^,]*\).*+\1+' guestHyp1ver Reported-by: Kashyap Chamarthy <kchamart@xxxxxxxxxx> Reviewed-by: Kashyap Chamarthy <kchamart@xxxxxxxxxx> Signed-off-by: Daniel P. Berrangé <berrange@xxxxxxxxxx> commit 1215195fd882efac47c07c16bfff0ad9a33c45a3 Author: Erik Skultety <eskultet@xxxxxxxxxx> Date: Thu Dec 6 16:12:14 2018 +0100 domain: conf: graphics: Fix picking DRI renderer automatically for SPICE Commit 255e0732 introduced a few graphics-related helpers. The problem is that virDomainGraphicsNeedsAutoRenderNode returns true if it gets NULL as a response from virDomainGraphicsNeedsAutoRenderNode. That's okay for egl-headless because that one always needs a DRM render node, the same is not true for SPICE though, and unless the XML specifies <gl enable='yes'> for SPICE, there's no need for any renderer. Signed-off-by: Erik Skultety <eskultet@xxxxxxxxxx> Reviewed-by: Ján Tomko <jtomko@xxxxxxxxxx> commit 067aad26befafb446e8a0d5c83d1a4d3b7f704d9 Author: Nikolay Shirokovskiy <nshirokovskiy@xxxxxxxxxxxxx> Date: Fri Nov 9 10:50:47 2018 +0300 qemu: disable external snapshot of readonly disk Disable external snapshot of a readonly disk for domains as this operation is not very useful. Such a snapshot is not possible for active domains but the error message from QEMU is more cryptic: error: internal error: unable to execute QEMU command 'transaction': Could not create file: Permission denied This error at least makes the error more understandable for active domains and disallows for inactive domains as well. Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@xxxxxxxxxxxxx> Reviewed-by: John Ferlan <jferlan@xxxxxxxxxx> _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxxx https://lists.xenproject.org/mailman/listinfo/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |