Re: [Xen-devel] [PATCH v8 3/6] xen/arm: zynqmp: introduce zynqmp specific defines

[Julien Grall <julien.grall@xxxxxxx>]

Hi Stefano,

On 18/12/2018 23:32, Stefano Stabellini wrote:
> From: "Edgar E. Iglesias" <edgar.iglesias@xxxxxxxxxx>
>
> Introduce zynqmp specific defines for the firmware calls.
> See EEMI:
> https://www.xilinx.com/support/documentation/user_guides/ug1200-eemi-api.pdf
>
> The error codes are described, under XIlPM Error Codes:
> https://www.xilinx.com/support/documentation/user_guides/ug1137-zynq-ultrascale-mpsoc-swdev.pdf
>
> - pm_api_id
> These are the EEMI function IDs. Unavoidable.
>
> - pm_ret_status
> These are the EEMI return statuses. Unavoidable.
>
> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xxxxxxxxxx> > Signed-off-by: Stefano 
> Stabellini <stefanos@xxxxxxxxxx>
Acked-by: Julien Grall <julien.grall@xxxxxxx>

Cheers,

> ---
>
> Changes in v8:
> - move PM_GET_TRUSTZONE_VERSION to enum
> - remove redundant ZYNQMP_SIP_SVC_* definitions
>
> Changes in v7:
> - introduce EEMI_FID
> - remove tabs
>
> Changes in v6:
> - improve commit message
> - remove MM_*, node ids and reset ids
>
> Changes in v5:
> - remove MMIO access related definitions
>
> Changes in v4:
> - define PM_MMIO_SHIFT
> ---
>   xen/include/asm-arm/platforms/xilinx-zynqmp-eemi.h | 83 ++++++++++++++++++++++
>   1 file changed, 83 insertions(+)
>
> diff --git a/xen/include/asm-arm/platforms/xilinx-zynqmp-eemi.h 
> b/xen/include/asm-arm/platforms/xilinx-zynqmp-eemi.h
> index 43cefb5..2fbf150 100644
> --- a/xen/include/asm-arm/platforms/xilinx-zynqmp-eemi.h
> +++ b/xen/include/asm-arm/platforms/xilinx-zynqmp-eemi.h
> @@ -15,6 +15,89 @@
>   #define __ASM_ASM_PLATFORMS_ZYNQMP_H
>   
>   #include <asm/processor.h>
> +#include <asm/smccc.h>
> +
> +#define EEMI_FID(fid) ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, \
> +                                         ARM_SMCCC_CONV_64,   \
> +                                         ARM_SMCCC_OWNER_SIP, \
> +                                         fid)
> +
> +enum pm_api_id {
> +    /* Miscellaneous API functions: */
> +    PM_GET_API_VERSION = 1, /* Do not change or move */
> +    PM_SET_CONFIGURATION,
> +    PM_GET_NODE_STATUS,
> +    PM_GET_OP_CHARACTERISTIC,
> +    PM_REGISTER_NOTIFIER,
> +    /* API for suspending of PUs: */
> +    PM_REQ_SUSPEND,
> +    PM_SELF_SUSPEND,
> +    PM_FORCE_POWERDOWN,
> +    PM_ABORT_SUSPEND,
> +    PM_REQ_WAKEUP,
> +    PM_SET_WAKEUP_SOURCE,
> +    PM_SYSTEM_SHUTDOWN,
> +    /* API for managing PM slaves: */
> +    PM_REQ_NODE,
> +    PM_RELEASE_NODE,
> +    PM_SET_REQUIREMENT,
> +    PM_SET_MAX_LATENCY,
> +    /* Direct control API functions: */
> +    PM_RESET_ASSERT,
> +    PM_RESET_GET_STATUS,
> +    PM_MMIO_WRITE,
> +    PM_MMIO_READ,
> +    PM_INIT,
> +    PM_FPGA_LOAD,
> +    PM_FPGA_GET_STATUS,
> +    PM_GET_CHIPID,
> +    /* ID 25 is been used by U-boot to process secure boot images */
> +    /* Secure library generic API functions */
> +    PM_SECURE_SHA = 26,
> +    PM_SECURE_RSA,
> +    /* Pin control API functions */
> +    PM_PINCTRL_REQUEST,
> +    PM_PINCTRL_RELEASE,
> +    PM_PINCTRL_GET_FUNCTION,
> +    PM_PINCTRL_SET_FUNCTION,
> +    PM_PINCTRL_CONFIG_PARAM_GET,
> +    PM_PINCTRL_CONFIG_PARAM_SET,
> +    /* PM IOCTL API */
> +    PM_IOCTL,
> +    /* API to query information from firmware */
> +    PM_QUERY_DATA,
> +    /* Clock control API functions */
> +    PM_CLOCK_ENABLE,
> +    PM_CLOCK_DISABLE,
> +    PM_CLOCK_GETSTATE,
> +    PM_CLOCK_SETDIVIDER,
> +    PM_CLOCK_GETDIVIDER,
> +    PM_CLOCK_SETRATE,
> +    PM_CLOCK_GETRATE,
> +    PM_CLOCK_SETPARENT,
> +    PM_CLOCK_GETPARENT,
> +    PM_GET_TRUSTZONE_VERSION = 2563,
> +    PM_API_MAX
> +};
> +
> +/**
> + * @XST_PM_SUCCESS:            Success
> + * @XST_PM_INTERNAL:   Unexpected error
> + * @XST_PM_CONFLICT:   Conflicting requirements
> + * @XST_PM_NO_ACCESS:  Access rights violation
> + * @XST_PM_INVALID_NODE:       Does not apply to node passed as argument
> + * @XST_PM_DOUBLE_REQ: Duplicate request
> + * @XST_PM_ABORT_SUSPEND:      Target has aborted suspend
> + */
> +enum pm_ret_status {
> +    XST_PM_SUCCESS = 0,
> +    XST_PM_INTERNAL = 2000,
> +    XST_PM_CONFLICT,
> +    XST_PM_NO_ACCESS,
> +    XST_PM_INVALID_NODE,
> +    XST_PM_DOUBLE_REQ,
> +    XST_PM_ABORT_SUSPEND,
> +};
>   
>   extern bool zynqmp_eemi(struct cpu_user_regs *regs);
>   
--
Julien Grall

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel