[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH v2 1/2] x86: respect memory size limiting via mem= parameter



* Juergen Gross <jgross@xxxxxxxx> wrote:

> When limiting memory size via kernel parameter "mem=" this should be
> respected even in case of memory made accessible via a PCI card.
> 
> Today this kind of memory won't be made usable in initial memory
> setup as the memory won't be visible in E820 map, but it might be
> added when adding PCI devices due to corresponding ACPI table entries.
> 
> Not respecting "mem=" can be corrected by adding a global max_mem_size
> variable set by parse_memopt() which will result in rejecting adding
> memory areas resulting in a memory size above the allowed limit.

So historically 'mem=xxxM' was a way to quickly limit RAM.

If PCI devices had physical mmio memory areas above this range, we'd 
still expect them to work - the option was really only meant to limit 
RAM.

So I'm wondering what the new logic is here - why should an iomem 
resource from a PCI device be ignored? It's a completely separate area 
that might or might not be enumerated in the e820 table - the only 
requirement we have here I think is that it not overlap RAM areas or each 
other (obviously).

So if I understood this new restriction you want mem= to imply, devices 
would start failing to initialize on bare metal when mem= is used?

Thanks,

        Ingo

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.