[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH V2 3/3] xen/arm: Add SCIFA UART support for early printk




On 18.02.19 16:05, Julien Grall wrote:
Hi,


Hi



On 01/02/2019 12:37, Oleksandr Tyshchenko wrote:
From: Oleksandr Tyshchenko <oleksandr_tyshchenko@xxxxxxxx>

Add support for Renesas "Stout" development board based on
R-Car H2 SoC which has SCIFA compatible UART.

Actually existing SCIF UART support (debug-scif.inc) and
newly added SCIFA UART support (debug-scifa.inc) differ only
in registers offsets.

Can we try to merge the two then? One solution is to provide another options similar to how we deal with REG_SHIFT on the 8250.


Actually, the main difference for the "early printk" support is in two reg offsets:

+#define SCIFA_SCASSR   0x14    /* Serial status register */
+#define SCIFA_SCAFTDR  0x20    /* Transmit FIFO data register */

+#define SCIF_SCFSR             0x10    /* Serial status register */
+#define SCIF_SCFTDR            0x0c    /* Transmit FIFO data register */


I am not mistaken, we will have to introduce two options to cover this case, as the offsets are not correlated with each other, no?



Cheers,

--
Regards,

Oleksandr Tyshchenko


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.