Re: [Xen-devel] XEN on R-CAR H3

[Oleksandr <olekstysh@xxxxxxxxx>]

On 05.03.19 18:50, Amit Tomer wrote:
> Hi,

Hi, Amit

> > The proper command is:
> >
> > mkimage -A arm64 -C none -T kernel -a 0x78080000 -e 0x78080000 -n "XEN"
> > -d xen/xen xen-uImage
> Yeah but it didn't boot it up :(
Have you tried to enable early_prink?


AFAIR, I tested that branch (ipmmu_v2) before submitting RFC patch 
series [1] and it was functional.
But, I don't quite remember what the BSP version (U-Boot/ARM-TF) I had 
based on.

[1] 
https://lists.xenproject.org/archives/html/xen-devel/2017-07/msg02679.html
> [   16.991035] => setenv ipaddr 10.105.2.28;setenv serverip
> 10.105.2.27;ping 10.105.2.27
> [   18.791456] ravb Waiting for PHY auto negotiation to complete... done
> [   21.506184] ravb: 1000Base/Full
> [   21.514787] Using ravb device
> [   26.518321] host 10.105.2.27 is alive
> [   26.522064] => tftp 0x48080000 xen-uImage
> [   32.859274] ravb:0 is connected to ravb.  Reconnecting to ravb
> [   32.866626] ravb Waiting for PHY auto negotiation to complete... done
> [   35.936229] ravb: 1000Base/Full
> [   35.944824] Using ravb device
> [   35.947840] TFTP from server 10.105.2.27; our IP address is 10.105.2.28
> [   35.954733] Filename 'xen-uImage'.
> [   35.958271] Load address: 0x48080000
> [   35.961990] Loading:
> #################################################################
> [   41.049127]
> #################################################################
> [   41.131627]   ##################
> [   41.154635]   141.6 KiB/s
> [   41.157357] done
> [   41.159264] Bytes transferred = 754064 (b8190 hex)
> [   41.164605] => bootm 0x48080000
> [   48.511339] ## Booting kernel from Legacy Image at 48080000 ...
> [   48.517501]    Image Name:   XEN
> [   48.520855]    Image Type:   AArch64 Linux Kernel Image (uncompressed)
> [   48.527659]    Data Size:    754000 Bytes = 736.3 KiB
> [   48.532921]    Load Address: 48080000
> [   48.536731]    Entry Point:  48080000
> [   48.540541]    Verifying Checksum ... OK
> [   48.548190]    Loading Kernel Image ... OK
> [   48.554182]
> [   48.555635] Starting kernel ...
> [   48.558901]
>
> We even tried loading it to 0x78080000.
>
> Thanks
> -Amit
--
Regards,

Oleksandr Tyshchenko


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel