[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v6 09/10] tools/arm: tee: add "tee" option for xl.cfg



This enumeration controls TEE type for a domain. Currently there is
two possible options: either 'none' or 'optee'.

'none' is the default value and it basically disables TEE support at
all.

'optee' enables access to the OP-TEE running on a host machine. This
requires special OP-TEE build with virtualization support enabled.

Signed-off-by: Volodymyr Babchuk <volodymyr_babchuk@xxxxxxxx>

---
 All the patches to optee.c should be merged together. They were
 split to ease up review. But they depend heavily on each other.

 Changes from v5:
  - Replaced "native" with "optee" in the commit description.
  - Updated and extended documentation based on Julien Grall's
    and Ian Jackson's suggestions.

 Changes from v4:
  - "native" option was replaced with "optee"
  - "tee" property was moved from arch-specific section to the
     global one. Documentation moved inside "Devices" section.

 Changes from v3:
  - tee_enabled renamed to tee_type. Currently two types are supported
    as described in the commit message
  - Add LIBXL_HAVE_BUILDINFO_ARCH_ARM_TEE definition

 Changes from v2:
  - Use arch.tee_enabled instead of separate domctl
---
 docs/man/xl.cfg.5.pod.in    | 21 +++++++++++++++++++++
 tools/libxl/libxl.h         |  5 +++++
 tools/libxl/libxl_arm.c     | 13 +++++++++++++
 tools/libxl/libxl_types.idl |  6 ++++++
 tools/xl/xl_parse.c         |  9 +++++++++
 5 files changed, 54 insertions(+)

diff --git a/docs/man/xl.cfg.5.pod.in b/docs/man/xl.cfg.5.pod.in
index c99d40307e..e65ab6111f 100644
--- a/docs/man/xl.cfg.5.pod.in
+++ b/docs/man/xl.cfg.5.pod.in
@@ -1544,6 +1544,27 @@ Set maximum height for pointer device.
 
 =back
 
+=item B<tee="STRING">
+
+B<Arm only.> Set TEE type for the guest. TEE is a Trusted Execution
+Environment -- separate secure OS found on some platforms. B<STRING> can be 
one of the:
+
+=over 4
+
+=item B<none>
+
+Disable TEE support at all. This is the default value.
+
+=item B<optee>
+
+Allow a guest to use OP-TEE. Note that a virtualization-aware OP-TEE
+is required for this. If this option is selected, guest will be able
+to access to the real OP-TEE OS running on the host. Guest creation
+will fail if OP-TEE have no resources for a new guest. Number of supported
+guests depends on OP-TEE configuration.
+
+=back
+
 =back
 
 =head2 Paravirtualised (PV) Guest Specific Options
diff --git a/tools/libxl/libxl.h b/tools/libxl/libxl.h
index 9bacfb97f0..1fe6ea2bd8 100644
--- a/tools/libxl/libxl.h
+++ b/tools/libxl/libxl.h
@@ -273,6 +273,11 @@
  */
 #define LIBXL_HAVE_BUILDINFO_ARM_GIC_VERSION 1
 
+/*
+ * libxl_domain_build_info has the arch_arm.tee field.
+ */
+#define LIBXL_HAVE_BUILDINFO_ARCH_ARM_TEE 1
+
 /*
  * LIBXL_HAVE_SOFT_RESET indicates that libxl supports performing
  * 'soft reset' for domains and there is 'soft_reset' shutdown reason
diff --git a/tools/libxl/libxl_arm.c b/tools/libxl/libxl_arm.c
index 141e159043..6b72c00960 100644
--- a/tools/libxl/libxl_arm.c
+++ b/tools/libxl/libxl_arm.c
@@ -89,6 +89,19 @@ int libxl__arch_domain_prepare_config(libxl__gc *gc,
         return ERROR_FAIL;
     }
 
+    switch (d_config->b_info.tee) {
+    case LIBXL_TEE_TYPE_NONE:
+        config->arch.tee_type = XEN_DOMCTL_CONFIG_TEE_NONE;
+        break;
+    case LIBXL_TEE_TYPE_OPTEE:
+        config->arch.tee_type = XEN_DOMCTL_CONFIG_TEE_OPTEE;
+        break;
+    default:
+        LOG(ERROR, "Unknown TEE type %d",
+            d_config->b_info.tee);
+        return ERROR_FAIL;
+    }
+
     return 0;
 }
 
diff --git a/tools/libxl/libxl_types.idl b/tools/libxl/libxl_types.idl
index b61399ce36..fa5ee65463 100644
--- a/tools/libxl/libxl_types.idl
+++ b/tools/libxl/libxl_types.idl
@@ -460,6 +460,11 @@ libxl_gic_version = Enumeration("gic_version", [
     (0x30, "v3")
     ], init_val = "LIBXL_GIC_VERSION_DEFAULT")
 
+libxl_tee_type = Enumeration("tee_type", [
+    (0, "none"),
+    (1, "optee")
+    ], init_val = "LIBXL_TEE_TYPE_NONE")
+
 libxl_rdm_reserve = Struct("rdm_reserve", [
     ("strategy",    libxl_rdm_reserve_strategy),
     ("policy",      libxl_rdm_reserve_policy),
@@ -537,6 +542,7 @@ libxl_domain_build_info = Struct("domain_build_info",[
     ("nested_hvm",       libxl_defbool),
     ("apic",             libxl_defbool),
     ("dm_restrict",      libxl_defbool),
+    ("tee",              libxl_tee_type),
     ("u", KeyedUnion(None, libxl_domain_type, "type",
                 [("hvm", Struct(None, [("firmware",         string),
                                        ("bios",             libxl_bios_type),
diff --git a/tools/xl/xl_parse.c b/tools/xl/xl_parse.c
index e105bda2bb..0604374ef3 100644
--- a/tools/xl/xl_parse.c
+++ b/tools/xl/xl_parse.c
@@ -2691,6 +2691,15 @@ skip_usbdev:
         }
     }
 
+    if (!xlu_cfg_get_string (config, "tee", &buf, 1)) {
+        e = libxl_tee_type_from_string(buf, &b_info->tee);
+        if (e) {
+            fprintf(stderr,
+                    "Unknown tee \"%s\" specified\n", buf);
+            exit(-ERROR_FAIL);
+        }
+    }
+
     parse_vkb_list(config, d_config);
 
     xlu_cfg_destroy(config);
-- 
2.21.0

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.