[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v1] Use XEN_SCRIPT_DIR to refer to /etc/xen/scripts



Now that scripts are stored in libexec, replace all hardcoded paths to
use XEN_SCRIPT_DIR to expand the actual location.

Update .gitignore.

Signed-off-by: Olaf Hering <olaf@xxxxxxxxx>
---
 .gitignore                                                          | 3 +++
 docs/configure.ac                                                   | 3 +++
 .../{xl-disk-configuration.5.pod => xl-disk-configuration.5.pod.in} | 2 +-
 ...etwork-configuration.5.pod => xl-network-configuration.5.pod.in} | 4 ++--
 docs/man/xl.1.pod.in                                                | 2 +-
 docs/man/{xl.conf.5.pod => xl.conf.5.pod.in}                        | 6 +++---
 docs/misc/block-scripts.txt                                         | 2 +-
 tools/xl/xl_cmdtable.c                                              | 2 +-
 8 files changed, 15 insertions(+), 9 deletions(-)
 rename docs/man/{xl-disk-configuration.5.pod => 
xl-disk-configuration.5.pod.in} (99%)
 rename docs/man/{xl-network-configuration.5.pod => 
xl-network-configuration.5.pod.in} (98%)
 rename docs/man/{xl.conf.5.pod => xl.conf.5.pod.in} (97%)

diff --git a/.gitignore b/.gitignore
index a77cbff02c..78577857ea 100644
--- a/.gitignore
+++ b/.gitignore
@@ -47,7 +47,10 @@ dist/*
 docs/tmp.*
 docs/html/
 docs/man/xl.cfg.5.pod
+docs/man/xl-disk-configuration.5.pod
+docs/man/xl-network-configuration.5.pod
 docs/man/xl.1.pod
+docs/man/xl.conf.5.pod
 docs/man1/
 docs/man5/
 docs/man7/
diff --git a/docs/configure.ac b/docs/configure.ac
index e795bec04c..169480da6c 100644
--- a/docs/configure.ac
+++ b/docs/configure.ac
@@ -9,6 +9,9 @@ AC_CONFIG_FILES([
 ../config/Docs.mk
 man/xl.cfg.5.pod
 man/xl.1.pod
+man/xl-disk-configuration.5.pod
+man/xl-network-configuration.5.pod
+man/xl.conf.5.pod
 ])
 AC_CONFIG_AUX_DIR([../])
 
diff --git a/docs/man/xl-disk-configuration.5.pod 
b/docs/man/xl-disk-configuration.5.pod.in
similarity index 99%
rename from docs/man/xl-disk-configuration.5.pod
rename to docs/man/xl-disk-configuration.5.pod.in
index 7965d5dd73..95c23b4a92 100644
--- a/docs/man/xl-disk-configuration.5.pod
+++ b/docs/man/xl-disk-configuration.5.pod.in
@@ -257,7 +257,7 @@ automatically determine the most suitable backend.
 
 Specifies that B<target> is not a normal host path, but rather
 information to be interpreted by the executable program I<SCRIPT>,
-(looked for in F</etc/xen/scripts>, if it doesn't contain a slash).
+(looked for in F<@XEN_SCRIPT_DIR@>, if it doesn't contain a slash).
 
 These scripts are normally called "block-I<SCRIPT>".
 
diff --git a/docs/man/xl-network-configuration.5.pod 
b/docs/man/xl-network-configuration.5.pod.in
similarity index 98%
rename from docs/man/xl-network-configuration.5.pod
rename to docs/man/xl-network-configuration.5.pod.in
index e9ac3c5b9e..c3467c6e76 100644
--- a/docs/man/xl-network-configuration.5.pod
+++ b/docs/man/xl-network-configuration.5.pod.in
@@ -169,8 +169,8 @@ number. Likewise the default tap name is 
C<vifDOMID.DEVID-emu>.
 
 Specifies the hotplug script to run to configure this device (e.g. to
 add it to the relevant bridge). Defaults to
-C<XEN_SCRIPT_DIR/vif-bridge> but can be set to any script. Some example
-scripts are installed in C<XEN_SCRIPT_DIR>.
+C<@XEN_SCRIPT_DIR@/vif-bridge> but can be set to any script. Some example
+scripts are installed in C<@XEN_SCRIPT_DIR@>.
 
 
 =head2 ip
diff --git a/docs/man/xl.1.pod.in b/docs/man/xl.1.pod.in
index 2f7375ed0a..3d64eaa5b2 100644
--- a/docs/man/xl.1.pod.in
+++ b/docs/man/xl.1.pod.in
@@ -571,7 +571,7 @@ See the corresponding option of the I<create> subcommand.
 =item B<-N> I<netbufscript>
 
 Use <netbufscript> to setup network buffering instead of the
-default script (/etc/xen/scripts/remus-netbuf-setup).
+default script (@XEN_SCRIPT_DIR@/remus-netbuf-setup).
 
 =item B<-F>
 
diff --git a/docs/man/xl.conf.5.pod b/docs/man/xl.conf.5.pod.in
similarity index 97%
rename from docs/man/xl.conf.5.pod
rename to docs/man/xl.conf.5.pod.in
index b1bde7d657..2beb2119a8 100644
--- a/docs/man/xl.conf.5.pod
+++ b/docs/man/xl.conf.5.pod.in
@@ -95,7 +95,7 @@ Configures the default hotplug script used by virtual network 
devices.
 
 The old B<vifscript> option is deprecated and should not be used.
 
-Default: C</etc/xen/scripts/vif-bridge>
+Default: C<@XEN_SCRIPT_DIR@/vif-bridge>
 
 =item B<vif.default.bridge="NAME">
 
@@ -121,13 +121,13 @@ Default: C<None>
 
 Configures the default script used by Remus to setup network buffering.
 
-Default: C</etc/xen/scripts/remus-netbuf-setup>
+Default: C<@XEN_SCRIPT_DIR@/remus-netbuf-setup>
 
 =item B<colo.default.proxyscript="PATH">
 
 Configures the default script used by COLO to setup colo-proxy.
 
-Default: C</etc/xen/scripts/colo-proxy-setup>
+Default: C<@XEN_SCRIPT_DIR@/colo-proxy-setup>
 
 =item B<output_format="json|sxp">
 
diff --git a/docs/misc/block-scripts.txt b/docs/misc/block-scripts.txt
index eabab100a8..8020787a52 100644
--- a/docs/misc/block-scripts.txt
+++ b/docs/misc/block-scripts.txt
@@ -18,7 +18,7 @@ Setup
 
 It is highly recommended that custom hotplug scripts as much as
 possible include and use the common Xen functionality.  If the script
-is run from the normal block script location (/etc/xen/scripts by
+is run from the normal block script location (/usr/lib/xen/scripts by
 default), then this can be done by adding the following to the top of
 the script:
 
diff --git a/tools/xl/xl_cmdtable.c b/tools/xl/xl_cmdtable.c
index 5baa6023aa..21620222cd 100644
--- a/tools/xl/xl_cmdtable.c
+++ b/tools/xl/xl_cmdtable.c
@@ -518,7 +518,7 @@ struct cmd_spec cmd_table[] = {
       "-e                      Do not wait in the background (on <host>) for 
the death\n"
       "                        of the domain.\n"
       "-N <netbufscript>       Use netbufscript to setup network buffering 
instead of the\n"
-      "                        default script 
(/etc/xen/scripts/remus-netbuf-setup).\n"
+      "                        default script (" XEN_SCRIPT_DIR 
"/remus-netbuf-setup).\n"
       "-F                      Enable unsafe configurations [-b|-n|-d flags]. 
Use this option\n"
       "                        with caution as failover may not work as 
intended.\n"
       "-b                      Replicate memory checkpoints to /dev/null 
(blackhole).\n"

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.