|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH v2 35/35] xen/arm: Zero BSS after the MMU and D-cache is turned on
At the moment BSS is zeroed before the MMU and D-Cache is turned on.
In other words, the cache will be bypassed when zeroing the BSS section.
On Arm64, per the Image protocol [1], the state of the cache for BSS region
is not known because it is not part of the "loaded kernel image".
On Arm32, the boot protocol [2] does not mention anything about the
state of the cache. Therefore, it should be assumed that it is not known
for BSS region.
This means that the cache will need to be invalidated twice for the BSS
region:
1) Before zeroing to remove any dirty cache line. Otherwise they may
get evicted while zeroing and therefore overriding the value.
2) After zeroing to remove any cache line that may have been
speculated. Otherwise when turning on MMU and D-Cache, the CPU may
see old values.
At the moment, the only reason to have BSS zeroed early is because the
boot page tables are part of it. To avoid the two cache invalidations,
it would be better if the boot page tables are part of the "loaded
kernel image" and therefore be zeroed when loading the image into
memory. A good candidate is the section .data.page_aligned.
A new macro DEFINE_BOOT_PAGE_TABLE is introduced to create and mark
page-tables used before BSS is zeroed. This includes all boot_* but also
xen_fixmap as zero_bss() will print a message when earlyprintk is
enabled.
[1] linux/Documentation/arm64/booting.txt
[2] linux/Documentation/arm/Booting
Signed-off-by: Julien Grall <julien.grall@xxxxxxx>
---
Changes in v2:
- Add missing signed-off
- Clarify commit message
- Add arm32 parts
---
xen/arch/arm/arm32/head.S | 11 +++--------
xen/arch/arm/arm64/head.S | 7 +++----
xen/arch/arm/mm.c | 23 +++++++++++++++++------
3 files changed, 23 insertions(+), 18 deletions(-)
diff --git a/xen/arch/arm/arm32/head.S b/xen/arch/arm/arm32/head.S
index 8a1e272aab..48cad6103f 100644
--- a/xen/arch/arm/arm32/head.S
+++ b/xen/arch/arm/arm32/head.S
@@ -149,7 +149,6 @@ past_zImage:
mov r12, #0 /* r12 := is_secondary_cpu */
bl check_cpu_mode
- bl zero_bss
bl cpu_init
bl create_page_tables
bl enable_mmu
@@ -170,6 +169,7 @@ primary_switched:
/* Use a virtual address to access the UART. */
mov_w r11, EARLY_UART_VIRTUAL_ADDRESS
#endif
+ bl zero_bss
PRINT("- Ready -\r\n")
/* Setup the arguments for start_xen and jump to C world */
mov r0, r10 /* r0 := Physical offset */
@@ -280,17 +280,12 @@ ENDPROC(check_cpu_mode)
/*
* Zero BSS
*
- * Inputs:
- * r10: Physical offset
- *
* Clobbers r0 - r3
*/
zero_bss:
PRINT("- Zero BSS -\r\n")
- ldr r0, =__bss_start /* Load start & end of bss */
- ldr r1, =__bss_end
- add r0, r0, r10 /* Apply physical offset */
- add r1, r1, r10
+ ldr r0, =__bss_start /* r0 := vaddr(__bss_start) */
+ ldr r1, =__bss_end /* r1 := vaddr(__bss_start) */
mov r2, #0
1: str r2, [r0], #4
diff --git a/xen/arch/arm/arm64/head.S b/xen/arch/arm/arm64/head.S
index 2287f3ce48..b671e0e59f 100644
--- a/xen/arch/arm/arm64/head.S
+++ b/xen/arch/arm/arm64/head.S
@@ -303,7 +303,6 @@ real_start_efi:
mov x22, #0 /* x22 := is_secondary_cpu */
bl check_cpu_mode
- bl zero_bss
bl cpu_init
bl create_page_tables
bl enable_mmu
@@ -324,6 +323,7 @@ primary_switched:
/* Use a virtual address to access the UART. */
ldr x23, =EARLY_UART_VIRTUAL_ADDRESS
#endif
+ bl zero_bss
PRINT("- Ready -\r\n")
/* Setup the arguments for start_xen and jump to C world */
mov x0, x20 /* x0 := Physical offset */
@@ -426,7 +426,6 @@ ENDPROC(check_cpu_mode)
* Zero BSS
*
* Inputs:
- * x20: Physical offset
* x26: Do we need to zero BSS?
*
* Clobbers x0 - x3
@@ -436,8 +435,8 @@ zero_bss:
cbnz x26, skip_bss
PRINT("- Zero BSS -\r\n")
- load_paddr x0, __bss_start /* Load paddr of start & end of bss */
- load_paddr x1, __bss_end
+ ldr x0, =__bss_start /* x0 := vaddr(__bss_start) */
+ ldr x1, =__bss_end /* x1 := vaddr(__bss_start) */
1: str xzr, [x0], #8
cmp x0, x1
diff --git a/xen/arch/arm/mm.c b/xen/arch/arm/mm.c
index 44258ad89c..670a3089ea 100644
--- a/xen/arch/arm/mm.c
+++ b/xen/arch/arm/mm.c
@@ -62,6 +62,17 @@ mm_printk(const char *fmt, ...) {}
} while (0);
#endif
+/*
+ * Macros to define page-tables:
+ * - DEFINE_BOOT_PAGE_TABLE is used to define page-table that are used
+ * in assembly code before BSS is zeroed.
+ * - DEFINE_PAGE_TABLE{,S} are used to define one or multiple
+ * page-tables to be used after BSS is zeroed (typically they are only used
+ * in C).
+ */
+#define DEFINE_BOOT_PAGE_TABLE(name) \
+lpae_t __aligned(PAGE_SIZE) __section(".data.page_aligned") name[LPAE_ENTRIES]
+
#define DEFINE_PAGE_TABLES(name, nr) \
lpae_t __aligned(PAGE_SIZE) name[LPAE_ENTRIES * (nr)]
@@ -90,13 +101,13 @@ lpae_t __aligned(PAGE_SIZE) name[LPAE_ENTRIES * (nr)]
* Finally, if EARLY_PRINTK is enabled then xen_fixmap will be mapped
* by the CPU once it has moved off the 1:1 mapping.
*/
-DEFINE_PAGE_TABLE(boot_pgtable);
+DEFINE_BOOT_PAGE_TABLE(boot_pgtable);
#ifdef CONFIG_ARM_64
-DEFINE_PAGE_TABLE(boot_first);
-DEFINE_PAGE_TABLE(boot_first_id);
+DEFINE_BOOT_PAGE_TABLE(boot_first);
+DEFINE_BOOT_PAGE_TABLE(boot_first_id);
#endif
-DEFINE_PAGE_TABLE(boot_second);
-DEFINE_PAGE_TABLE(boot_third);
+DEFINE_BOOT_PAGE_TABLE(boot_second);
+DEFINE_BOOT_PAGE_TABLE(boot_third);
/* Main runtime page tables */
@@ -149,7 +160,7 @@ static __initdata int xenheap_first_first_slot = -1;
*/
static DEFINE_PAGE_TABLES(xen_second, 2);
/* First level page table used for fixmap */
-DEFINE_PAGE_TABLE(xen_fixmap);
+DEFINE_BOOT_PAGE_TABLE(xen_fixmap);
/* First level page table used to map Xen itself with the XN bit set
* as appropriate. */
static DEFINE_PAGE_TABLE(xen_xenmap);
--
2.11.0
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |