[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH V2 6/6] iommu/arm: Add Renesas IPMMU-VMSA support





Hi,

Hi, Julien.



Sorry for the possible format issues.


     > No, it is not disabled. But, ipmmu_irq() uses another mmu->lock. So, I
     > think, there won't be a deadlock.
     >
     > Or I really missed something?
     >
     > If we worry about ipmmu_tlb_invalidate() which is called here (to
     > perform a flush by request from P2M code, which manages a page table)
     > and from the irq handler (to perform a flush to resume address
     > translation), I could use a tasklet to schedule ipmmu_tlb_invalidate()      > from the irq handler then. This way we would get this serialized. What
     > do you think?

    I am afraid a tasklet is not an option. You need to perform the TLB
    flush when requested otherwise you are introducing a security issue.

    This is because as soon as a region is unmapped in the page table, we     remove the drop the reference on any page backing that region. When the
    reference is dropped to zero, the page can be reallocated to another
    domain or even Xen. If the TLB flush happen after, then the guest may     still be able to access the page for a short time if the translation has
    been cached by the any TLB (IOMMU, Processor).



I understand this. I am not proposing to delay a requested by P2M code TLB flush in any case. I just propose to issue TLB flush (which we have to perform in case of page faults, to resolve error condition and resume translations) from a tasklet rather than from interrupt handler directly. This is the TLB flush I am speaking about:

https://github.com/otyshchenko1/xen/blob/ipmmu_upstream2/xen/drivers/passthrough/arm/ipmmu-vmsa.c#L598

Sorry if I was unclear.

My mistake, I misread what you wrote.

I found the flush in the renesas-bsp and not Linux upstream but it is not clear why this is actually required. You are not fixing any translation error. So what this flush will do?

Regarding the placement of the flush, then if you execute in a tasklet it will likely be done later on when the IRQ has been acknowledge. What's the implication to delay it?


Looks like, there is no need to put this flush into a tasklet. As I understand from Shimoda-san's answer it is OK to call flush here.

So, my worry about calling ipmmu_tlb_invalidate() directly from the interrupt handler is not actual anymore.
----------
This is my understanding regarding the flush purpose here. This code, just follows the TRM, no more no less, which mentions about a need to flush TLB after clearing error status register and updating a page table entries (which, I assume, means to resolve a reason why translation/page fault error actually have happened) to resume address translation request.

But, with one remark, as you have already noted, we are not trying to handle/fix this fault (update page table entries), driver doesn't manage page table and is not aware what the page table is. What is more, it is unclear what actually need to be fixed in the page table which is a CPU page table as the same time.

I have heard there is a break-before-make sequence when updating the page table. So, if device in a domain is issuing DMA somewhere in the middle of updating a page table, theoretically, we might hit into this fault. In this case the page table is correct and we don't need to fix anything...   Being honest, I have never seen a fault caused by break-before-make sequence.


Cheers,

--
Regards,

Oleksandr Tyshchenko


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.