[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v4 7/8] xen/arm32: head: Introduce macros to create table and mapping entry



At the moment, any update to the boot-pages are open-coded. This is
making more difficult to understand the logic of a function as each
update roughly requires 6 instructions.

To ease the readability, two new macros are introduced:
    - create_table_entry: Create a page-table entry in a given table.
    This can work at any level.
    - create_mapping_entry: Create a mapping entry in a given table.
    None of the users will require to map at any other level than 3rd
    (i.e page granularity). So the macro is only supporting 3rd level
    mapping.

Unlike arm64, there are no easy way to have a PC relative address within
the range -/+4GB. In order to have the possibility to use the macro in
context with MMU on/off, the user needs to tell the state of the MMU.

Lastly, take the opportunity to replace open-coded version in
setup_fixmap() by the two new macros. The ones in create_page_tables()
will be replaced in a follow-up patch.

Signed-off-by: Julien Grall <julien.grall@xxxxxxx>

---
    The adr_l hack is a bit ugly, but I can't find nicer way to avoid
    code duplication and improve readability.

    Changes in v4:
        - Fix typo
        - s/tlb/ptlb/ in create_mapping_entry macro
        - Expand comment on top of addr_l macro
        - Re-order code in create_mapping_entry

    Changes in v3:
        - Patch added
---
 xen/arch/arm/arm32/head.S | 111 ++++++++++++++++++++++++++++++++++++++--------
 1 file changed, 92 insertions(+), 19 deletions(-)

diff --git a/xen/arch/arm/arm32/head.S b/xen/arch/arm/arm32/head.S
index f58d0fcb80..175f0c9760 100644
--- a/xen/arch/arm/arm32/head.S
+++ b/xen/arch/arm/arm32/head.S
@@ -50,6 +50,23 @@
 .endm
 
 /*
+ * There are no easy way to have a PC relative address within the range
+ * +/- 4GB of the PC.
+ *
+ * This macro workaround it by asking the user to tell whether the MMU
+ * has been turned on or not.
+ *
+ * When the MMU is turned off, we need to apply the physical offset
+ * (r10) in order to find the associated physical address.
+ */
+.macro adr_l, dst, sym, mmu
+        ldr   \dst, =\sym
+        .if \mmu == 0
+        add   \dst, \dst, r10
+        .endif
+.endm
+
+/*
  * Common register usage in this file:
  *   r0  -
  *   r1  -
@@ -342,6 +359,76 @@ cpu_init_done:
 ENDPROC(cpu_init)
 
 /*
+ * Macro to create a page table entry in \ptbl to \tbl
+ *
+ * ptbl:    table symbol where the entry will be created
+ * tbl:     table symbol to point to
+ * virt:    virtual address
+ * shift:   #imm page table shift
+ * mmu:     Is the MMU turned on/off. If not specified it will be off
+ *
+ * Preserves \virt
+ * Clobbers r1 - r4
+ *
+ * Also use r10 for the phys offset.
+ *
+ * Note that \virt should be in a register other than r1 - r4
+ */
+.macro create_table_entry, ptbl, tbl, virt, shift, mmu=0
+        lsr   r1, \virt, #\shift
+        mov_w r2, LPAE_ENTRY_MASK
+        and   r1, r1, r2             /* r1 := slot in \tlb */
+        lsl   r1, r1, #3             /* r1 := slot offset in \tlb */
+
+        ldr   r4, =\tbl
+        add   r4, r4, r10            /* r4 := paddr(\tlb) */
+
+        mov   r2, #PT_PT             /* r2:r3 := right for linear PT */
+        orr   r2, r2, r4             /*           + \tlb paddr */
+        mov   r3, #0
+
+        adr_l r4, \ptbl, \mmu
+
+        strd  r2, r3, [r4, r1]
+.endm
+
+/*
+ * Macro to create a mapping entry in \tbl to \paddr. Only mapping in 3rd
+ * level table (i.e page granularity) is supported.
+ *
+ * ptbl:     table symbol where the entry will be created
+ * virt:    virtual address
+ * phys:    physical address
+ * type:    mapping type. If not specified it will be normal memory (PT_MEM_L3)
+ * mmu:     Is the MMU turned on/off. If not specified it will be off
+ *
+ * Preserves \virt, \phys
+ * Clobbers r1 - r4
+ *
+ * * Also use r10 for the phys offset.
+ *
+ * Note that \virt and \paddr should be in other registers than r1 - r4
+ * and be distinct.
+ */
+.macro create_mapping_entry, ptbl, virt, phys, type=PT_MEM_L3, mmu=0
+        mov_w r2, LPAE_ENTRY_MASK
+        lsr   r1, \virt, #THIRD_SHIFT
+        and   r1, r1, r2             /* r1 := slot in \tlb */
+        lsl   r1, r1, #3             /* r1 := slot offset in \tlb */
+
+        lsr   r4, \phys, #THIRD_SHIFT
+        lsl   r4, r4, #THIRD_SHIFT   /* r4 := PAGE_ALIGNED(phys) */
+
+        mov   r2, #\type             /* r2:r3 := right for section PT */
+        orr   r2, r2, r4             /*          + PAGE_ALIGNED(phys) */
+        mov   r3, #0
+
+        adr_l r4, \ptbl, \mmu
+
+        strd  r2, r3, [r4, r1]
+.endm
+
+/*
  * Rebuild the boot pagetable's first-level entries. The structure
  * is described in mm.c.
  *
@@ -557,31 +644,17 @@ ENDPROC(remove_identity_mapping)
  *   r10: Physical offset
  *   r11: Early UART base physical address
  *
- * Clobbers r1 - r4
+ * Clobbers r0 - r4
  */
 setup_fixmap:
 #if defined(CONFIG_EARLY_PRINTK)
         /* Add UART to the fixmap table */
-        ldr   r1, =xen_fixmap        /* r1 := vaddr (xen_fixmap) */
-        lsr   r2, r11, #THIRD_SHIFT
-        lsl   r2, r2, #THIRD_SHIFT   /* 4K aligned paddr of UART */
-        orr   r2, r2, #PT_UPPER(DEV_L3)
-        orr   r2, r2, #PT_LOWER(DEV_L3) /* r2:r3 := 4K dev map including UART 
*/
-        mov   r3, #0x0
-        strd  r2, r3, [r1, #(FIXMAP_CONSOLE*8)] /* Map it in the first 
fixmap's slot */
+        ldr   r0, =EARLY_UART_VIRTUAL_ADDRESS
+        create_mapping_entry xen_fixmap, r0, r11, type=PT_DEV_L3, mmu=1
 #endif
-
         /* Map fixmap into boot_second */
-        ldr   r1, =boot_second       /* r1 := vaddr (boot_second) */
-        ldr   r2, =xen_fixmap
-        add   r2, r2, r10            /* r2 := paddr (xen_fixmap) */
-        orr   r2, r2, #PT_UPPER(PT)
-        orr   r2, r2, #PT_LOWER(PT)  /* r2:r3 := table map of xen_fixmap */
-        ldr   r4, =FIXMAP_ADDR(0)
-        mov   r4, r4, lsr #(SECOND_SHIFT - 3)   /* r4 := Slot for FIXMAP(0) */
-        mov   r3, #0x0
-        strd  r2, r3, [r1, r4]       /* Map it in the fixmap's slot */
-
+        mov_w r0, FIXMAP_ADDR(0)
+        create_table_entry boot_second, xen_fixmap, r0, SECOND_SHIFT, mmu=1
         /* Ensure any page table updates made above have occurred. */
         dsb   nshst
 
-- 
2.11.0


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.