[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v6 1/8] xen/arm: introduce handle_device_interrupts



Move the interrupt handling code out of handle_device to a new function
so that it can be reused for dom0less VMs (it will be used in later
patches).

Signed-off-by: Stefano Stabellini <stefanos@xxxxxxxxxx>
Acked-by: Julien Grall <julien.grall@xxxxxxx>
---
Changes in v4:
- rename handle_interrupts to handle_device_interrupts
- improve in-code comment
- remove return 1 if mapping is done
- use unsigned

Changes in v3:
- add patch

The diff is hard to read but I just moved the interrupts related code
from handle_devices to a new function handle_device_interrupts, and very
little else.
---
 xen/arch/arm/domain_build.c | 80 +++++++++++++++++++++++--------------
 1 file changed, 51 insertions(+), 29 deletions(-)

diff --git a/xen/arch/arm/domain_build.c b/xen/arch/arm/domain_build.c
index a0fee1ef13..21985628f0 100644
--- a/xen/arch/arm/domain_build.c
+++ b/xen/arch/arm/domain_build.c
@@ -1239,41 +1239,22 @@ static int __init map_device_children(struct domain *d,
 }
 
 /*
- * For a given device node:
- *  - Give permission to the guest to manage IRQ and MMIO range
- *  - Retrieve the IRQ configuration (i.e edge/level) from device tree
- * When the device is not marked for guest passthrough:
- *  - Assign the device to the guest if it's protected by an IOMMU
- *  - Map the IRQs and iomem regions to DOM0
+ * handle_device_interrupts retrieves the interrupts configuration from
+ * a device tree node and maps those interrupts to the target domain.
+ *
+ * Returns:
+ *   < 0 error
+ *   0   success
  */
-static int __init handle_device(struct domain *d, struct dt_device_node *dev,
-                                p2m_type_t p2mt)
+static int __init handle_device_interrupts(struct domain *d,
+                                           struct dt_device_node *dev,
+                                           bool need_mapping)
 {
-    unsigned int nirq;
-    unsigned int naddr;
-    unsigned int i;
+    unsigned int i, nirq;
     int res;
     struct dt_raw_irq rirq;
-    u64 addr, size;
-    bool need_mapping = !dt_device_for_passthrough(dev);
 
     nirq = dt_number_of_irq(dev);
-    naddr = dt_number_of_address(dev);
-
-    dt_dprintk("%s passthrough = %d nirq = %d naddr = %u\n",
-               dt_node_full_name(dev), need_mapping, nirq, naddr);
-
-    if ( dt_device_is_protected(dev) && need_mapping )
-    {
-        dt_dprintk("%s setup iommu\n", dt_node_full_name(dev));
-        res = iommu_assign_dt_device(d, dev);
-        if ( res )
-        {
-            printk(XENLOG_ERR "Failed to setup the IOMMU for %s\n",
-                   dt_node_full_name(dev));
-            return res;
-        }
-    }
 
     /* Give permission and map IRQs */
     for ( i = 0; i < nirq; i++ )
@@ -1310,6 +1291,47 @@ static int __init handle_device(struct domain *d, struct 
dt_device_node *dev,
             return res;
     }
 
+    return 0;
+}
+
+/*
+ * For a given device node:
+ *  - Give permission to the guest to manage IRQ and MMIO range
+ *  - Retrieve the IRQ configuration (i.e edge/level) from device tree
+ * When the device is not marked for guest passthrough:
+ *  - Assign the device to the guest if it's protected by an IOMMU
+ *  - Map the IRQs and iomem regions to DOM0
+ */
+static int __init handle_device(struct domain *d, struct dt_device_node *dev,
+                                p2m_type_t p2mt)
+{
+    unsigned int naddr;
+    unsigned int i;
+    int res;
+    u64 addr, size;
+    bool need_mapping = !dt_device_for_passthrough(dev);
+
+    naddr = dt_number_of_address(dev);
+
+    dt_dprintk("%s passthrough = %d naddr = %u\n",
+               dt_node_full_name(dev), need_mapping, naddr);
+
+    if ( dt_device_is_protected(dev) && need_mapping )
+    {
+        dt_dprintk("%s setup iommu\n", dt_node_full_name(dev));
+        res = iommu_assign_dt_device(d, dev);
+        if ( res )
+        {
+            printk(XENLOG_ERR "Failed to setup the IOMMU for %s\n",
+                   dt_node_full_name(dev));
+            return res;
+        }
+    }
+
+    res = handle_device_interrupts(d, dev, need_mapping);
+    if ( res < 0 )
+        return res;
+
     /* Give permission and map MMIOs */
     for ( i = 0; i < naddr; i++ )
     {
-- 
2.17.1


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.