[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH] x86/stackframe/32: repair 32-bit Xen PV



On 25.10.19 08:06, Jan Beulich wrote:
On 24.10.2019 18:11, Andy Lutomirski wrote:
On Mon, Oct 7, 2019 at 3:41 AM Jan Beulich <jbeulich@xxxxxxxx> wrote:

Once again RPL checks have been introduced which don't account for a
32-bit kernel living in ring 1 when running in a PV Xen domain. The
case in FIXUP_FRAME has been preventing boot; adjust BUG_IF_WRONG_CR3
as well just in case.

I'm okay with the generated code, but IMO the macro is too indirect
for something that's trivial.


Fixes: 3c88c692c287 ("x86/stackframe/32: Provide consistent pt_regs")
Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx>

--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -48,6 +48,17 @@

   #include "calling.h"

+#ifndef CONFIG_XEN_PV
+# define USER_SEGMENT_RPL_MASK SEGMENT_RPL_MASK
+#else
+/*
+ * When running paravirtualized on Xen the kernel runs in ring 1, and hence
+ * simple mask based tests (i.e. ones not comparing against USER_RPL) have to
+ * ignore bit 0. See also the C-level get_kernel_rpl().
+ */

How about:

/*
   * When running on Xen PV, the actual %cs register in the kernel is 1, not 0.
   * If we need to distinguish between a %cs from kernel mode and a %cs from
   * user mode, we can do test $2 instead of test $3.
   */
#define USER_SEGMENT_RPL_MASK 2

I.e. you're fine using just the single bit in all configurations?

+# define USER_SEGMENT_RPL_MASK (SEGMENT_RPL_MASK & ~1)
+#endif
+
          .section .entry.text, "ax"

   /*
@@ -172,7 +183,7 @@
          ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI
          .if \no_user_check == 0
          /* coming from usermode? */
-       testl   $SEGMENT_RPL_MASK, PT_CS(%esp)
+       testl   $USER_SEGMENT_RPL_MASK, PT_CS(%esp)

Shouldn't PT_CS(%esp) be 0 if we came from the kernel?  I'm guessing
the actual bug is in whatever code put 1 in here in the first place.

In other words, I'm having trouble understanding why there is any
context in which some value would be 3 for user mode and 1 for kernel
mode.  Obviously if we're manually IRETing to kernel mode, we need to
set CS to 1, but if we're filling in our own PT_CS, we should just
write 0.

The supposedly offending commit (""x86/stackframe/32: Provide
consistent pt_regs") looks correct to me, so I suspect that the
problem is elsewhere.  Or is it intentional that Xen PV's asm
(arch/x86/xen/whatever) sticks 1 into the CS field on the stack?

Manually created / updated frames _could_ in principle modify the
RPL, but ones coming from hardware (old 32-bit hypervisors) or Xen
(64-bit hypervisors) will have an RPL of 1, as already said by
Andrew. We could in principle also add a VM assist for the
hypervisor to store an RPL of 0, but I'd expect this to require
further kernel changes, and together with the old behavior still
being required to support I'm unconvinced this would be worth it.

Also, why are we supporting 32-bit Linux PV guests at all?  Can we
just delete this code instead?

This was already suggested by Jürgen (now also CC-ed), but in reply
it was pointed out that the process would be to first deprecate the
code, and remove it only a couple of releases later if no-one comes
up with a reason to retain it.

Thanks for the reminder.

I'll send a patch with the deprecation warning for 32-bit PV.


Juergen

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.