[Xen-devel] [PATCH v2] x86: Fix Kconfig indentation

[Krzysztof Kozlowski <krzk@xxxxxxxxxx>]

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
        $ sed -e 's/^        /\t/' -i */Kconfig

Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>

---

Changes since v1:
1. Fix also 7-space and tab+1 space indentation issues.
---
 arch/x86/Kconfig     | 68 ++++++++++++++++++++++++++--------------------------
 arch/x86/xen/Kconfig |  8 +++----
 2 files changed, 38 insertions(+), 38 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 3fc6daff2109..1466c1b029e7 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -442,8 +442,8 @@ config X86_MPPARSE
          (esp with 64bit cpus) with acpi support, MADT and DSDT will override 
it
 
 config GOLDFISH
-       def_bool y
-       depends on X86_GOLDFISH
+       def_bool y
+       depends on X86_GOLDFISH
 
 config RETPOLINE
        bool "Avoid speculative indirect branches in kernel"
@@ -564,9 +564,9 @@ config X86_UV
 # Please maintain the alphabetic order if and when there are additions
 
 config X86_GOLDFISH
-       bool "Goldfish (Virtual Platform)"
-       depends on X86_EXTENDED_PLATFORM
-       ---help---
+       bool "Goldfish (Virtual Platform)"
+       depends on X86_EXTENDED_PLATFORM
+       ---help---
         Enable support for the Goldfish virtual platform used primarily
         for Android development. Unless you are building for the Android
         Goldfish emulator say N here.
@@ -809,9 +809,9 @@ config KVM_GUEST
          timing infrastructure such as time of day, and system time
 
 config ARCH_CPUIDLE_HALTPOLL
-        def_bool n
-        prompt "Disable host haltpoll when loading haltpoll driver"
-        help
+       def_bool n
+       prompt "Disable host haltpoll when loading haltpoll driver"
+       help
          If virtualized under KVM, disable host haltpoll.
 
 config PVH
@@ -890,16 +890,16 @@ config HPET_EMULATE_RTC
        depends on HPET_TIMER && (RTC=y || RTC=m || RTC_DRV_CMOS=m || 
RTC_DRV_CMOS=y)
 
 config APB_TIMER
-       def_bool y if X86_INTEL_MID
-       prompt "Intel MID APB Timer Support" if X86_INTEL_MID
-       select DW_APB_TIMER
-       depends on X86_INTEL_MID && SFI
-       help
-         APB timer is the replacement for 8254, HPET on X86 MID platforms.
-         The APBT provides a stable time base on SMP
-         systems, unlike the TSC, but it is more expensive to access,
-         as it is off-chip. APB timers are always running regardless of CPU
-         C states, they are used as per CPU clockevent device when possible.
+       def_bool y if X86_INTEL_MID
+       prompt "Intel MID APB Timer Support" if X86_INTEL_MID
+       select DW_APB_TIMER
+       depends on X86_INTEL_MID && SFI
+       help
+        APB timer is the replacement for 8254, HPET on X86 MID platforms.
+        The APBT provides a stable time base on SMP
+        systems, unlike the TSC, but it is more expensive to access,
+        as it is off-chip. APB timers are always running regardless of CPU
+        C states, they are used as per CPU clockevent device when possible.
 
 # Mark as expert because too many people got it wrong.
 # The code disables itself when not needed.
@@ -1038,8 +1038,8 @@ config SCHED_MC_PRIO
          If unsure say Y here.
 
 config UP_LATE_INIT
-       def_bool y
-       depends on !SMP && X86_LOCAL_APIC
+       def_bool y
+       depends on !SMP && X86_LOCAL_APIC
 
 config X86_UP_APIC
        bool "Local APIC support on uniprocessors" if !PCI_MSI
@@ -1188,8 +1188,8 @@ config X86_LEGACY_VM86
          If unsure, say N here.
 
 config VM86
-       bool
-       default X86_LEGACY_VM86
+       bool
+       default X86_LEGACY_VM86
 
 config X86_16BIT
        bool "Enable support for 16-bit segments" if EXPERT
@@ -1210,10 +1210,10 @@ config X86_ESPFIX64
        depends on X86_16BIT && X86_64
 
 config X86_VSYSCALL_EMULATION
-       bool "Enable vsyscall emulation" if EXPERT
-       default y
-       depends on X86_64
-       ---help---
+       bool "Enable vsyscall emulation" if EXPERT
+       default y
+       depends on X86_64
+       ---help---
         This enables emulation of the legacy vsyscall page.  Disabling
         it is roughly equivalent to booting with vsyscall=none, except
         that it will also disable the helpful warning if a program
@@ -1651,9 +1651,9 @@ config ARCH_PROC_KCORE_TEXT
        depends on X86_64 && PROC_KCORE
 
 config ILLEGAL_POINTER_VALUE
-       hex
-       default 0 if X86_32
-       default 0xdead000000000000 if X86_64
+       hex
+       default 0 if X86_32
+       default 0xdead000000000000 if X86_64
 
 config X86_PMEM_LEGACY_DEVICE
        bool
@@ -1994,11 +1994,11 @@ config EFI
          platforms.
 
 config EFI_STUB
-       bool "EFI stub support"
-       depends on EFI && !X86_USE_3DNOW
-       select RELOCATABLE
-       ---help---
-          This kernel feature allows a bzImage to be loaded directly
+       bool "EFI stub support"
+       depends on EFI && !X86_USE_3DNOW
+       select RELOCATABLE
+       ---help---
+         This kernel feature allows a bzImage to be loaded directly
          by EFI firmware without the use of a bootloader.
 
          See Documentation/admin-guide/efi-stub.rst for more information.
diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig
index ba5a41828e9d..1aded63a95cb 100644
--- a/arch/x86/xen/Kconfig
+++ b/arch/x86/xen/Kconfig
@@ -62,10 +62,10 @@ config XEN_512GB
          boot parameter "xen_512gb_limit".
 
 config XEN_SAVE_RESTORE
-       bool
-       depends on XEN
-       select HIBERNATE_CALLBACKS
-       default y
+       bool
+       depends on XEN
+       select HIBERNATE_CALLBACKS
+       default y
 
 config XEN_DEBUG_FS
        bool "Enable Xen debug and tuning parameters in debugfs"
-- 
2.7.4


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel