[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH 3/4] xen/interface: don't discard pending work in FRONT/BACK_RING_ATTACH



> -----Original Message-----
> From: Jürgen Groß <jgross@xxxxxxxx>
> Sent: 09 December 2019 13:55
> To: Durrant, Paul <pdurrant@xxxxxxxxxx>; linux-kernel@xxxxxxxxxxxxxxx;
> xen-devel@xxxxxxxxxxxxxxxxxxxx
> Cc: Boris Ostrovsky <boris.ostrovsky@xxxxxxxxxx>; Stefano Stabellini
> <sstabellini@xxxxxxxxxx>
> Subject: Re: [PATCH 3/4] xen/interface: don't discard pending work in
> FRONT/BACK_RING_ATTACH
> 
> On 05.12.19 15:01, Paul Durrant wrote:
> > Currently these macros will skip over any requests/responses that are
> > added to the shared ring whilst it is detached. This, in general, is not
> > a desirable semantic since most frontend implementations will eventually
> > block waiting for a response which would either never appear or never be
> > processed.
> >
> > NOTE: These macros are currently unused. BACK_RING_ATTACH(), however,
> will
> >        be used in a subsequent patch.
> >
> > Signed-off-by: Paul Durrant <pdurrant@xxxxxxxxxx>
> > ---
> > Cc: Boris Ostrovsky <boris.ostrovsky@xxxxxxxxxx>
> > Cc: Juergen Gross <jgross@xxxxxxxx>
> > Cc: Stefano Stabellini <sstabellini@xxxxxxxxxx>
> > ---
> >   include/xen/interface/io/ring.h | 4 ++--
> >   1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/include/xen/interface/io/ring.h
> b/include/xen/interface/io/ring.h
> > index 3f40501fc60b..405adfed87e6 100644
> > --- a/include/xen/interface/io/ring.h
> > +++ b/include/xen/interface/io/ring.h
> > @@ -143,14 +143,14 @@ struct __name##_back_ring {
>               \
> >   #define FRONT_RING_ATTACH(_r, _s, __size) do {                            
> > \
> >       (_r)->sring = (_s);                                                   
> > \
> >       (_r)->req_prod_pvt = (_s)->req_prod;                          \
> > -    (_r)->rsp_cons = (_s)->rsp_prod;                                       
> > \
> > +    (_r)->rsp_cons = (_s)->req_prod;                                       
> > \
> >       (_r)->nr_ents = __RING_SIZE(_s, __size);                              
> > \
> >   } while (0)
> >
> >   #define BACK_RING_ATTACH(_r, _s, __size) do {                             
> > \
> >       (_r)->sring = (_s);                                                   
> > \
> >       (_r)->rsp_prod_pvt = (_s)->rsp_prod;                          \
> > -    (_r)->req_cons = (_s)->req_prod;                                       
> > \
> > +    (_r)->req_cons = (_s)->rsp_prod;                                       
> > \
> >       (_r)->nr_ents = __RING_SIZE(_s, __size);                              
> > \
> >   } while (0)
> 
> Lets look at all possible scenarios where BACK_RING_ATTACH()
> might happen:
> 
> Initially (after [FRONT|BACK]_RING_INIT(), leaving _pvt away):
> req_prod=0, rsp_cons=0, rsp_prod=0, req_cons=0
> Using BACK_RING_ATTACH() is fine (no change)
> 
> Request queued:
> req_prod=1, rsp_cons=0, rsp_prod=0, req_cons=0
> Using BACK_RING_ATTACH() is fine (no change)
> 
> and taken by backend:
> req_prod=1, rsp_cons=0, rsp_prod=0, req_cons=1
> Using BACK_RING_ATTACH() is resetting req_cons to 0, will result
> in redoing request (for blk this is fine, other devices like SCSI
> tapes will have issues with that). One possible solution would be
> to ensure all taken requests are either stopped or the response
> is queued already.

Yes, it is the assumption that a backend will drain and complete any requests 
it is handling, but it will not deal with new ones being posted by the 
frontend. This does appear to be the case for blkback.

> 
> Response queued:
> req_prod=1, rsp_cons=0, rsp_prod=1, req_cons=1
> Using BACK_RING_ATTACH() is fine (no change)
> 
> Response taken:
> req_prod=1, rsp_cons=1, rsp_prod=1, req_cons=1
> Using BACK_RING_ATTACH() is fine (no change)
> 
> In general I believe the [FRONT|BACK]_RING_ATTACH() macros are not
> fine to be used in the current state, as the *_pvt fields normally not
> accessible by the other end are initialized using the (possibly
> untrusted) values from the shared ring. There needs at least to be a
> test for the values to be sane, and your change should not result in the
> same value to be read twice, as it could have changed in between.

What test would you apply to sanitize the value of the pvt pointer? Another 
option would be to have a backend write its pvt value into the xenstore backend 
area when the ring is unmapped, so that a new instance definitely resumes where 
the old one left off. The value of rsp_prod could, of course, be overwritten by 
the guest at any time and so there's little point in attempting sanitize it.

> 
> As this is an error which can happen in other OS's, too, I'd recommend
> to add the adapted macros (plus a comment regarding the possible
> problem noted above for special devices like tapes) to the Xen variant
> of ring.h.
> 

I can certainly send a patch to Xen once we agree on the final definition.

  Paul

> 
> Juergen
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.