Re: [Xen-devel] xen-block: race condition when stopping the device (WAS: Re: [xen-4.13-testing test] 144736: regressions - FAIL)

["Durrant, Paul" <pdurrant@xxxxxxxxxx>]

> -----Original Message-----
> From: Xen-devel <xen-devel-bounces@xxxxxxxxxxxxxxxxxxxx> On Behalf Of
> Durrant, Paul
> Sent: 16 December 2019 09:34
> To: Julien Grall <julien@xxxxxxx>; Ian Jackson <ian.jackson@xxxxxxxxxx>
> Cc: Jürgen Groß <jgross@xxxxxxxx>; Stefano Stabellini
> <sstabellini@xxxxxxxxxx>; qemu-devel@xxxxxxxxxx; osstest service owner
> <osstest-admin@xxxxxxxxxxxxxx>; Anthony Perard
> <anthony.perard@xxxxxxxxxx>; xen-devel@xxxxxxxxxxxxxxxxxxxx
> Subject: Re: [Xen-devel] xen-block: race condition when stopping the
> device (WAS: Re: [xen-4.13-testing test] 144736: regressions - FAIL)
> 
> > -----Original Message-----
> [snip]
> > >>
> > >> This feels like a race condition between the init/free code with
> > >> handler. Anthony, does it ring any bell?
> > >>
> > >
> > >  From that stack bt it looks like an iothread managed to run after the
> > sring was NULLed. This should not be able happen as the dataplane should
> > have been moved back onto QEMU's main thread context before the ring is
> > unmapped.
> >
> > My knowledge of this code is fairly limited, so correct me if I am
> wrong.
> >
> > blk_set_aio_context() would set the context for the block aio. AFAICT,
> > the only aio for the block is xen_block_complete_aio().
> 
> Not quite. xen_block_dataplane_start() calls
> xen_device_bind_event_channel() and that will add an event channel fd into
> the aio context, so the shared ring is polled by the iothread as well as
> block i/o completion.
> 
> >
> > In the stack above, we are not dealing with a block aio but an aio tie
> > to the event channel (see the call from xen_device_poll). So I don't
> > think the blk_set_aio_context() would affect the aio.
> >
> 
> For the reason I outline above, it does.
> 
> > So it would be possible to get the iothread running because we received
> > a notification on the event channel while we are stopping the block (i.e
> > xen_block_dataplane_stop()).
> >
> 
> We should assume an iothread can essentially run at any time, as it is a
> polling entity. It should eventually block polling on fds assign to its
> aio context but I don't think the abstraction guarantees that it cannot be
> awoken for other reasons (e.g. off a timeout). However and event from the
> frontend will certainly cause the evtchn fd poll to wake up.
> 
> > If xen_block_dataplane_stop() grab the context lock first, then the
> > iothread dealing with the event may wait on the lock until its released.
> >
> > By the time the lock is grabbed, we may have free all the resources
> > (including srings). So the event iothread will end up to dereference a
> > NULL pointer.
> >
> 
> I think the problem may actually be that xen_block_dataplane_event() does
> not acquire the context and thus is not synchronized with
> xen_block_dataplane_stop(). The documentation in multiple-iothreads.txt is
> not clear whether a poll handler called by an iothread needs to acquire
> the context though; TBH I would not have thought it necessary.
> 
> > It feels to me we need a way to quiesce all the iothreads (blk,
> > event,...) before continuing. But I am a bit unsure how to do this in
> > QEMU.
> >
> 
> Looking at virtio-blk.c I see that it does seem to close off its evtchn
> equivalent from iothread context via aio_wait_bh_oneshot(). So I wonder
> whether the 'right' thing to do is to call
> xen_device_unbind_event_channel() using the same mechanism to ensure
> xen_block_dataplane_event() can't race.

Digging around the virtio-blk history I see:

commit 1010cadf62332017648abee0d7a3dc7f2eef9632
Author: Stefan Hajnoczi <stefanha@xxxxxxxxxx>
Date:   Wed Mar 7 14:42:03 2018 +0000

    virtio-blk: fix race between .ioeventfd_stop() and vq handler

    If the main loop thread invokes .ioeventfd_stop() just as the vq handler
    function begins in the IOThread then the handler may lose the race for
    the AioContext lock.  By the time the vq handler is able to acquire the
    AioContext lock the ioeventfd has already been removed and the handler
    isn't supposed to run anymore!

    Use the new aio_wait_bh_oneshot() function to perform ioeventfd removal
    from within the IOThread.  This way no races with the vq handler are
    possible.

    Signed-off-by: Stefan Hajnoczi <stefanha@xxxxxxxxxx>
    Reviewed-by: Fam Zheng <famz@xxxxxxxxxx>
    Acked-by: Paolo Bonzini <pbonzini@xxxxxxxxxx>
    Message-id: 20180307144205.20619-3-stefanha@xxxxxxxxxx
    Signed-off-by: Stefan Hajnoczi <stefanha@xxxxxxxxxx>

...so I think xen-block has exactly the same problem. I think we may also be 
missing a qemu_bh_cancel() to make sure block aio completions are stopped. I'll 
prep a patch.

  Paul

> 
>   Paul
> 
> > Cheers,
> >
> > --
> > Julien Grall
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxxx
> https://lists.xenproject.org/mailman/listinfo/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel