[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [RFC PATCH 1/1] xen: Use a global mapping for runstate



On 28.05.2020 20:54, Julien Grall wrote:
> On 28/05/2020 16:25, Bertrand Marquis wrote:
>> At the moment on Arm, a Linux guest running with KTPI enabled will
>> cause the following error when a context switch happens in user mode:
>> (XEN) p2m.c:1890: d1v0: Failed to walk page-table va 0xffffff837ebe0cd0
>>
>> This patch is modifying runstate handling to map the area given by the
>> guest inside Xen during the hypercall.
>> This is removing the guest virtual to physical conversion during context
>> switches which removes the bug
> 
> It would be good to spell out that a virtual address is not stable. So 
> relying on it is wrong.

Guests at present are permitted to change the mapping underneath the
virtual address provided (this may not be the best idea, but the
interface is like it is). Therefore I don't think the present
interface can be changed like this. Instead a new interface will need
adding which takes a guest physical address instead. (Which, in the
end, will merely be one tiny step towards making the hypercall
interfaces use guest physical addresses. And it would be nice if an
overall concept was hashed out first how that conversion should
occur, such that the change here could at least be made fit that
planned model. For example, an option might be to retain all present
hypercall numbering and simply dedicate a bit in the top level
hypercall numbers indicating whether _all_ involved addresses for
that operation are physical vs virtual ones.)

Jan



 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.