Re: [patch V2 43/46] genirq/msi: Provide and use msi_domain_set_default_info_flags()

[Marc Zyngier <maz@xxxxxxxxxx>]

On 2020-08-26 12:17, Thomas Gleixner wrote:
> MSI interrupts have some common flags which should be set not only for
> PCI/MSI interrupts.
>
> Move the PCI/MSI flag setting into a common function so it can be 
> reused.
> Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
> ---
> V2: New patch
> ---
>  drivers/pci/msi.c   |    7 +------
>  include/linux/msi.h |    1 +
>  kernel/irq/msi.c    |   24 ++++++++++++++++++++++++
>  3 files changed, 26 insertions(+), 6 deletions(-)
>
> --- a/drivers/pci/msi.c
> +++ b/drivers/pci/msi.c
> @@ -1469,12 +1469,7 @@ struct irq_domain *pci_msi_create_irq_do
>         if (info->flags & MSI_FLAG_USE_DEF_CHIP_OPS)
>                 pci_msi_domain_update_chip_ops(info);
>
> -       info->flags |= MSI_FLAG_ACTIVATE_EARLY;
> -       if (IS_ENABLED(CONFIG_GENERIC_IRQ_RESERVATION_MODE))
> -               info->flags |= MSI_FLAG_MUST_REACTIVATE;
> -
> -       /* PCI-MSI is oneshot-safe */
> -       info->chip->flags |= IRQCHIP_ONESHOT_SAFE;
> +       msi_domain_set_default_info_flags(info);
>
>         domain = msi_create_irq_domain(fwnode, info, parent);
>         if (!domain)
> --- a/include/linux/msi.h
> +++ b/include/linux/msi.h
> @@ -410,6 +410,7 @@ int platform_msi_domain_alloc(struct irq
>  void platform_msi_domain_free(struct irq_domain *domain, unsigned int 
> virq,
>                               unsigned int nvec);
>  void *platform_msi_get_host_data(struct irq_domain *domain);
> +void msi_domain_set_default_info_flags(struct msi_domain_info *info);
>  #endif /* CONFIG_GENERIC_MSI_IRQ_DOMAIN */
>
>  #ifdef CONFIG_PCI_MSI_IRQ_DOMAIN
> --- a/kernel/irq/msi.c
> +++ b/kernel/irq/msi.c
> @@ -70,6 +70,30 @@ void get_cached_msi_msg(unsigned int irq
>  EXPORT_SYMBOL_GPL(get_cached_msi_msg);
>
>  #ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN
> +void msi_domain_set_default_info_flags(struct msi_domain_info *info)
> +{
> +	/* Required so that a device latches a valid MSI message on startup 
> */
> +       info->flags |= MSI_FLAG_ACTIVATE_EARLY;
As far as I remember the story behind this flag (it's been a while),
it was working around a PCI-specific issue, hence being located in
the PCI code.

Now, the "program the MSI before enabling it" concept makes sense no 
matter
what bus this is on, and I wonder why we are even keeping this flag 
around.
Can't we just drop it together with the check in 
msi_domain_alloc_irqs()?
Thanks,

        M.
--
Jazz is not dead. It just smells funny...