Re: [PATCH v4 3/3] ns16550: Gate all PCI code with CONFIG_X86

[Rahul Singh <Rahul.Singh@xxxxxxx>]

Hello Julien,

> On 25 Nov 2020, at 6:16 pm, Rahul Singh <rahul.singh@xxxxxxx> wrote:
> 
> The NS16550 driver is assuming that NS16550 PCI card are usable if the
> architecture supports PCI (i.e. CONFIG_HAS_PCI=y). However, the code is
> very x86 focus and will fail to build on Arm (/!\ it is not all the
> errors):
> 
> ns16550.c: In function ‘ns16550_init_irq’:
> ns16550.c:726:21: error: implicit declaration of function ‘create_irq’;
> did you mean ‘release_irq’? [-Werror=implicit-function-declaration]
>          uart->irq = create_irq(0, false);
>                      ^~~~~~~~~~
>                      release_irq
> ns16550.c:726:21: error: nested extern declaration of ‘create_irq’
> [-Werror=nested-externs]
> ns16550.c: In function ‘ns16550_init_postirq’:
> ns16550.c:768:33: error: ‘mmio_ro_ranges’ undeclared (first use in this
> function); did you mean ‘mmio_handler’?
>               rangeset_add_range(mmio_ro_ranges, uart->io_base,
>                                  ^~~~~~~~~~~~~~
>                                  mmio_handler
> ns16550.c:768:33: note: each undeclared identifier is reported only once
> for each function it appears in
> ns16550.c:780:20: error: variable ‘msi’ has initializer but incomplete
> type
>              struct msi_info msi = {
>                     ^~~~~~~~
> 
> Enabling support for NS16550 PCI card on Arm would require more plumbing
> in addition to fixing the compilation error.
> 
> Arm systems tend to have platform UART available such as NS16550, PL011.
> So there are limited reasons to get NS16550 PCI support for now on Arm.
> 
> Guard all remaining PCI code that is not under x86 flag with CONFIG_X86.
> 
> No functional change intended.
> 
> Signed-off-by: Rahul Singh <rahul.singh@xxxxxxx>

Sorry I missed to add the signed off for the commit msg. I will send the next 
version once reviewed done.
Signed-off-by: Julien Grall <jgrall@xxxxxxxxxx>

Regards,
Rahul
> ---
> 
> Changes in v4:
> - As per the discussion guard all remaining PCI code with CONFIG_X86
> 
> ---
> xen/drivers/char/ns16550.c | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/xen/drivers/char/ns16550.c b/xen/drivers/char/ns16550.c
> index 9235d854fe..26e601857a 100644
> --- a/xen/drivers/char/ns16550.c
> +++ b/xen/drivers/char/ns16550.c
> @@ -16,7 +16,7 @@
> #include <xen/timer.h>
> #include <xen/serial.h>
> #include <xen/iocap.h>
> -#ifdef CONFIG_HAS_PCI
> +#if defined(CONFIG_X86) && defined(CONFIG_HAS_PCI)
> #include <xen/pci.h>
> #include <xen/pci_regs.h>
> #include <xen/pci_ids.h>
> @@ -51,7 +51,7 @@ static struct ns16550 {
>     unsigned int timeout_ms;
>     bool_t intr_works;
>     bool_t dw_usr_bsy;
> -#ifdef CONFIG_HAS_PCI
> +#if defined(CONFIG_X86) && defined(CONFIG_HAS_PCI)
>     /* PCI card parameters. */
>     bool_t pb_bdf_enable;   /* if =1, pb-bdf effective, port behind bridge */
>     bool_t ps_bdf_enable;   /* if =1, ps_bdf effective, port on pci card */
> @@ -66,7 +66,7 @@ static struct ns16550 {
> #endif
> } ns16550_com[2] = { { 0 } };
> 
> -#ifdef CONFIG_HAS_PCI
> +#if defined(CONFIG_X86) && defined(CONFIG_HAS_PCI)
> struct ns16550_config {
>     u16 vendor_id;
>     u16 dev_id;
> @@ -256,7 +256,7 @@ static int ns16550_getc(struct serial_port *port, char 
> *pc)
> 
> static void pci_serial_early_init(struct ns16550 *uart)
> {
> -#ifdef CONFIG_HAS_PCI
> +#if defined(CONFIG_X86) && defined(CONFIG_HAS_PCI)
>     if ( !uart->ps_bdf_enable || uart->io_base >= 0x10000 )
>         return;
> 
> @@ -355,7 +355,7 @@ static void __init ns16550_init_preirq(struct serial_port 
> *port)
> 
> static void __init ns16550_init_irq(struct serial_port *port)
> {
> -#ifdef CONFIG_HAS_PCI
> +#if defined(CONFIG_X86) && defined(CONFIG_HAS_PCI)
>     struct ns16550 *uart = port->uart;
> 
>     if ( uart->msi )
> @@ -397,7 +397,7 @@ static void __init ns16550_init_postirq(struct 
> serial_port *port)
>     uart->timeout_ms = max_t(
>         unsigned int, 1, (bits * uart->fifo_size * 1000) / uart->baud);
> 
> -#ifdef CONFIG_HAS_PCI
> +#if defined(CONFIG_X86) && defined(CONFIG_HAS_PCI)
>     if ( uart->bar || uart->ps_bdf_enable )
>     {
>         if ( uart->param && uart->param->mmio &&
> @@ -477,7 +477,7 @@ static void ns16550_suspend(struct serial_port *port)
> 
>     stop_timer(&uart->timer);
> 
> -#ifdef CONFIG_HAS_PCI
> +#if defined(CONFIG_X86) && defined(CONFIG_HAS_PCI)
>     if ( uart->bar )
>        uart->cr = pci_conf_read16(PCI_SBDF(0, uart->ps_bdf[0], 
> uart->ps_bdf[1],
>                                   uart->ps_bdf[2]), PCI_COMMAND);
> @@ -486,7 +486,7 @@ static void ns16550_suspend(struct serial_port *port)
> 
> static void _ns16550_resume(struct serial_port *port)
> {
> -#ifdef CONFIG_HAS_PCI
> +#if defined(CONFIG_X86) && defined(CONFIG_HAS_PCI)
>     struct ns16550 *uart = port->uart;
> 
>     if ( uart->bar )
> -- 
> 2.17.1
>