Xen project Mailing List

[PATCH v3 5/7] docs: move generic-loader documentation into the main manual

We might as well surface this useful information in the manual so users can find it easily. It is a fairly simple conversion to rst with the only textual fixes being QemuOps to QemuOpts. Signed-off-by: Alex Bennée <alex.bennee@xxxxxxxxxx> Reviewed-by: Alistair Francis <alistair.francis@xxxxxxx> Message-Id: <20201105175153.30489-6-alex.bennee@xxxxxxxxxx> Message-Id: <20210211171945.18313-6-alex.bennee@xxxxxxxxxx> --- docs/generic-loader.txt | 92 -------------------------- docs/system/generic-loader.rst | 117 +++++++++++++++++++++++++++++++++ docs/system/index.rst | 1 + MAINTAINERS | 2 +- 4 files changed, 119 insertions(+), 93 deletions(-) delete mode 100644 docs/generic-loader.txt create mode 100644 docs/system/generic-loader.rst diff --git a/docs/generic-loader.txt b/docs/generic-loader.txt deleted file mode 100644 index a9603a2af7..0000000000 --- a/docs/generic-loader.txt +++ /dev/null @@ -1,92 +0,0 @@ -Copyright (c) 2016 Xilinx Inc. - -This work is licensed under the terms of the GNU GPL, version 2 or later. See -the COPYING file in the top-level directory. - - -The 'loader' device allows the user to load multiple images or values into -QEMU at startup. - -Loading Data into Memory Values -------------------------------- -The loader device allows memory values to be set from the command line. This -can be done by following the syntax below: - - -device loader,addr=<addr>,data=<data>,data-len=<data-len> - [,data-be=<data-be>][,cpu-num=<cpu-num>] - - <addr> - The address to store the data in. - <data> - The value to be written to the address. The maximum size of - the data is 8 bytes. - <data-len> - The length of the data in bytes. This argument must be - included if the data argument is. - <data-be> - Set to true if the data to be stored on the guest should be - written as big endian data. The default is to write little - endian data. - <cpu-num> - The number of the CPU's address space where the data should - be loaded. If not specified the address space of the first - CPU is used. - -All values are parsed using the standard QemuOps parsing. This allows the user -to specify any values in any format supported. By default the values -will be parsed as decimal. To use hex values the user should prefix the number -with a '0x'. - -An example of loading value 0x8000000e to address 0xfd1a0104 is: - -device loader,addr=0xfd1a0104,data=0x8000000e,data-len=4 - -Setting a CPU's Program Counter -------------------------------- -The loader device allows the CPU's PC to be set from the command line. This -can be done by following the syntax below: - - -device loader,addr=<addr>,cpu-num=<cpu-num> - - <addr> - The value to use as the CPU's PC. - <cpu-num> - The number of the CPU whose PC should be set to the - specified value. - -All values are parsed using the standard QemuOps parsing. This allows the user -to specify any values in any format supported. By default the values -will be parsed as decimal. To use hex values the user should prefix the number -with a '0x'. - -An example of setting CPU 0's PC to 0x8000 is: - -device loader,addr=0x8000,cpu-num=0 - -Loading Files -------------- -The loader device also allows files to be loaded into memory. It can load ELF, -U-Boot, and Intel HEX executable formats as well as raw images. The syntax is -shown below: - - -device loader,file=<file>[,addr=<addr>][,cpu-num=<cpu-num>][,force-raw=<raw>] - - <file> - A file to be loaded into memory - <addr> - The memory address where the file should be loaded. This is - required for raw images and ignored for non-raw files. - <cpu-num> - This specifies the CPU that should be used. This is an - optional argument and will cause the CPU's PC to be set to - the memory address where the raw file is loaded or the entry - point specified in the executable format header. This option - should only be used for the boot image. - This will also cause the image to be written to the specified - CPU's address space. If not specified, the default is CPU 0. - <force-raw> - Setting force-raw=on forces the file to be treated as a raw - image. This can be used to load supported executable formats - as if they were raw. - -All values are parsed using the standard QemuOps parsing. This allows the user -to specify any values in any format supported. By default the values -will be parsed as decimal. To use hex values the user should prefix the number -with a '0x'. - -An example of loading an ELF file which CPU0 will boot is shown below: - -device loader,file=./images/boot.elf,cpu-num=0 - -Restrictions and ToDos ----------------------- - - At the moment it is just assumed that if you specify a cpu-num then you - want to set the PC as well. This might not always be the case. In future - the internal state 'set_pc' (which exists in the generic loader now) should - be exposed to the user so that they can choose if the PC is set or not. diff --git a/docs/system/generic-loader.rst b/docs/system/generic-loader.rst new file mode 100644 index 0000000000..6bf8a4eb48 --- /dev/null +++ b/docs/system/generic-loader.rst @@ -0,0 +1,117 @@ +.. + Copyright (c) 2016, Xilinx Inc. + +This work is licensed under the terms of the GNU GPL, version 2 or later. See +the COPYING file in the top-level directory. + +Generic Loader +-------------- + +The 'loader' device allows the user to load multiple images or values into +QEMU at startup. + +Loading Data into Memory Values +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +The loader device allows memory values to be set from the command line. This +can be done by following the syntax below:: + + -device loader,addr=<addr>,data=<data>,data-len=<data-len> \ + [,data-be=<data-be>][,cpu-num=<cpu-num>] + +``<addr>`` + The address to store the data in. + +``<data>`` + The value to be written to the address. The maximum size of the data + is 8 bytes. + +``<data-len>`` + The length of the data in bytes. This argument must be included if + the data argument is. + +``<data-be>`` + Set to true if the data to be stored on the guest should be written + as big endian data. The default is to write little endian data. + +``<cpu-num>`` + The number of the CPU's address space where the data should be + loaded. If not specified the address space of the first CPU is used. + +All values are parsed using the standard QemuOps parsing. This allows the user +to specify any values in any format supported. By default the values +will be parsed as decimal. To use hex values the user should prefix the number +with a '0x'. + +An example of loading value 0x8000000e to address 0xfd1a0104 is:: + + -device loader,addr=0xfd1a0104,data=0x8000000e,data-len=4 + +Setting a CPU's Program Counter +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The loader device allows the CPU's PC to be set from the command line. This +can be done by following the syntax below:: + + -device loader,addr=<addr>,cpu-num=<cpu-num> + +``<addr>`` + The value to use as the CPU's PC. + +``<cpu-num>`` + The number of the CPU whose PC should be set to the specified value. + +All values are parsed using the standard QemuOpts parsing. This allows the user +to specify any values in any format supported. By default the values +will be parsed as decimal. To use hex values the user should prefix the number +with a '0x'. + +An example of setting CPU 0's PC to 0x8000 is:: + + -device loader,addr=0x8000,cpu-num=0 + +Loading Files +^^^^^^^^^^^^^ + +The loader device also allows files to be loaded into memory. It can load ELF, +U-Boot, and Intel HEX executable formats as well as raw images. The syntax is +shown below: + + -device loader,file=<file>[,addr=<addr>][,cpu-num=<cpu-num>][,force-raw=<raw>] + +``<file>`` + A file to be loaded into memory + +``<addr>`` + The memory address where the file should be loaded. This is required + for raw images and ignored for non-raw files. + +``<cpu-num>`` + This specifies the CPU that should be used. This is an + optional argument and will cause the CPU's PC to be set to the + memory address where the raw file is loaded or the entry point + specified in the executable format header. This option should only + be used for the boot image. This will also cause the image to be + written to the specified CPU's address space. If not specified, the + default is CPU 0. <force-raw> - Setting force-raw=on forces the file + to be treated as a raw image. This can be used to load supported + executable formats as if they were raw. + +All values are parsed using the standard QemuOpts parsing. This allows the user +to specify any values in any format supported. By default the values +will be parsed as decimal. To use hex values the user should prefix the number +with a '0x'. + +An example of loading an ELF file which CPU0 will boot is shown below:: + + -device loader,file=./images/boot.elf,cpu-num=0 + +Restrictions and ToDos +^^^^^^^^^^^^^^^^^^^^^^ + +At the moment it is just assumed that if you specify a cpu-num then +you want to set the PC as well. This might not always be the case. In +future the internal state 'set_pc' (which exists in the generic loader +now) should be exposed to the user so that they can choose if the PC +is set or not. + + diff --git a/docs/system/index.rst b/docs/system/index.rst index 625b494372..cee1c83540 100644 --- a/docs/system/index.rst +++ b/docs/system/index.rst @@ -25,6 +25,7 @@ Contents: usb ivshmem linuxboot + generic-loader vnc-security tls gdb diff --git a/MAINTAINERS b/MAINTAINERS index a5b87d5e30..34cdd20672 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2005,7 +2005,7 @@ M: Alistair Francis <alistair@xxxxxxxxxxxxx> S: Maintained F: hw/core/generic-loader.c F: include/hw/core/generic-loader.h -F: docs/generic-loader.txt +F: docs/system/generic-loader.rst Guest Loader M: Alex Bennée <alex.bennee@xxxxxxxxxx> -- 2.20.1

©2013 Xen Project, A Linux Foundation Collaborative Project. All Rights Reserved.
Linux Foundation is a registered trademark of The Linux Foundation.
Xen Project is a trademark of The Linux Foundation.