|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [PATCH v6 13/12] x86/alternative: merge include files
Merge arch/x86/include/asm/alternative-asm.h into
arch/x86/include/asm/alternative.h in order to make it easier to use
common definitions later.
Signed-off-by: Juergen Gross <jgross@xxxxxxxx>
---
arch/x86/entry/entry_32.S | 2 +-
arch/x86/entry/vdso/vdso32/system_call.S | 2 +-
arch/x86/include/asm/alternative-asm.h | 121 -----------------------
arch/x86/include/asm/alternative.h | 121 +++++++++++++++++++++--
arch/x86/include/asm/nospec-branch.h | 1 -
arch/x86/include/asm/smap.h | 5 +-
arch/x86/lib/atomic64_386_32.S | 2 +-
arch/x86/lib/atomic64_cx8_32.S | 2 +-
arch/x86/lib/copy_page_64.S | 2 +-
arch/x86/lib/copy_user_64.S | 2 +-
arch/x86/lib/memcpy_64.S | 2 +-
arch/x86/lib/memmove_64.S | 2 +-
arch/x86/lib/memset_64.S | 2 +-
arch/x86/lib/retpoline.S | 2 +-
14 files changed, 126 insertions(+), 142 deletions(-)
delete mode 100644 arch/x86/include/asm/alternative-asm.h
diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index 765487e57d6e..96f084868ec7 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -40,7 +40,7 @@
#include <asm/processor-flags.h>
#include <asm/irq_vectors.h>
#include <asm/cpufeatures.h>
-#include <asm/alternative-asm.h>
+#include <asm/alternative.h>
#include <asm/asm.h>
#include <asm/smap.h>
#include <asm/frame.h>
diff --git a/arch/x86/entry/vdso/vdso32/system_call.S
b/arch/x86/entry/vdso/vdso32/system_call.S
index de1fff7188aa..d6a6080bade0 100644
--- a/arch/x86/entry/vdso/vdso32/system_call.S
+++ b/arch/x86/entry/vdso/vdso32/system_call.S
@@ -6,7 +6,7 @@
#include <linux/linkage.h>
#include <asm/dwarf2.h>
#include <asm/cpufeatures.h>
-#include <asm/alternative-asm.h>
+#include <asm/alternative.h>
.text
.globl __kernel_vsyscall
diff --git a/arch/x86/include/asm/alternative-asm.h
b/arch/x86/include/asm/alternative-asm.h
deleted file mode 100644
index 80bc6b533358..000000000000
--- a/arch/x86/include/asm/alternative-asm.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_X86_ALTERNATIVE_ASM_H
-#define _ASM_X86_ALTERNATIVE_ASM_H
-
-#ifdef __ASSEMBLY__
-
-#include <asm/asm.h>
-
-#define ALTINSTR_FLAG_INV (1 << 15)
-#define ALT_NOT(feat) ((feat) | ALTINSTR_FLAG_INV)
-
-#ifdef CONFIG_SMP
- .macro LOCK_PREFIX
-672: lock
- .pushsection .smp_locks,"a"
- .balign 4
- .long 672b - .
- .popsection
- .endm
-#else
- .macro LOCK_PREFIX
- .endm
-#endif
-
-/*
- * objtool annotation to ignore the alternatives and only consider the original
- * instruction(s).
- */
-.macro ANNOTATE_IGNORE_ALTERNATIVE
- .Lannotate_\@:
- .pushsection .discard.ignore_alts
- .long .Lannotate_\@ - .
- .popsection
-.endm
-
-/*
- * Issue one struct alt_instr descriptor entry (need to put it into
- * the section .altinstructions, see below). This entry contains
- * enough information for the alternatives patching code to patch an
- * instruction. See apply_alternatives().
- */
-.macro altinstruction_entry orig alt feature orig_len alt_len pad_len
- .long \orig - .
- .long \alt - .
- .word \feature
- .byte \orig_len
- .byte \alt_len
- .byte \pad_len
-.endm
-
-/*
- * Define an alternative between two instructions. If @feature is
- * present, early code in apply_alternatives() replaces @oldinstr with
- * @newinstr. ".skip" directive takes care of proper instruction padding
- * in case @newinstr is longer than @oldinstr.
- */
-.macro ALTERNATIVE oldinstr, newinstr, feature
-140:
- \oldinstr
-141:
- .skip -(((144f-143f)-(141b-140b)) > 0) * ((144f-143f)-(141b-140b)),0x90
-142:
-
- .pushsection .altinstructions,"a"
- altinstruction_entry 140b,143f,\feature,142b-140b,144f-143f,142b-141b
- .popsection
-
- .pushsection .altinstr_replacement,"ax"
-143:
- \newinstr
-144:
- .popsection
-.endm
-
-#define old_len 141b-140b
-#define new_len1 144f-143f
-#define new_len2 145f-144f
-
-/*
- * gas compatible max based on the idea from:
- * http://graphics.stanford.edu/~seander/bithacks.html#IntegerMinOrMax
- *
- * The additional "-" is needed because gas uses a "true" value of -1.
- */
-#define alt_max_short(a, b) ((a) ^ (((a) ^ (b)) & -(-((a) < (b)))))
-
-
-/*
- * Same as ALTERNATIVE macro above but for two alternatives. If CPU
- * has @feature1, it replaces @oldinstr with @newinstr1. If CPU has
- * @feature2, it replaces @oldinstr with @feature2.
- */
-.macro ALTERNATIVE_2 oldinstr, newinstr1, feature1, newinstr2, feature2
-140:
- \oldinstr
-141:
- .skip -((alt_max_short(new_len1, new_len2) - (old_len)) > 0) * \
- (alt_max_short(new_len1, new_len2) - (old_len)),0x90
-142:
-
- .pushsection .altinstructions,"a"
- altinstruction_entry 140b,143f,\feature1,142b-140b,144f-143f,142b-141b
- altinstruction_entry 140b,144f,\feature2,142b-140b,145f-144f,142b-141b
- .popsection
-
- .pushsection .altinstr_replacement,"ax"
-143:
- \newinstr1
-144:
- \newinstr2
-145:
- .popsection
-.endm
-
-#define ALTERNATIVE_TERNARY(oldinstr, feature, newinstr1, newinstr2) \
- ALTERNATIVE_2 oldinstr, newinstr2, X86_FEATURE_ALWAYS, \
- newinstr1, feature
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _ASM_X86_ALTERNATIVE_ASM_H */
diff --git a/arch/x86/include/asm/alternative.h
b/arch/x86/include/asm/alternative.h
index 4fb844e29d26..03f428e6b897 100644
--- a/arch/x86/include/asm/alternative.h
+++ b/arch/x86/include/asm/alternative.h
@@ -2,13 +2,17 @@
#ifndef _ASM_X86_ALTERNATIVE_H
#define _ASM_X86_ALTERNATIVE_H
-#ifndef __ASSEMBLY__
-
#include <linux/types.h>
-#include <linux/stddef.h>
#include <linux/stringify.h>
#include <asm/asm.h>
+#define ALTINSTR_FLAG_INV (1 << 15)
+#define ALT_NOT(feat) ((feat) | ALTINSTR_FLAG_INV)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/stddef.h>
+
/*
* Alternative inline assembly for SMP.
*
@@ -59,14 +63,11 @@ struct alt_instr {
s32 instr_offset; /* original instruction */
s32 repl_offset; /* offset to replacement instruction */
u16 cpuid; /* cpuid bit set for replacement */
-#define ALTINSTR_FLAG_INV (1 << 15)
u8 instrlen; /* length of original instruction */
u8 replacementlen; /* length of new instruction */
u8 padlen; /* length of build-time padding */
} __packed;
-#define ALT_NOT(feat) ((feat) | ALTINSTR_FLAG_INV)
-
/*
* Debug flag that can be tested to see whether alternative
* instructions were patched in already:
@@ -280,6 +281,114 @@ static inline int alternatives_text_reserved(void *start,
void *end)
*/
#define ASM_NO_INPUT_CLOBBER(clbr...) "i" (0) : clbr
+#else /* __ASSEMBLY__ */
+
+#ifdef CONFIG_SMP
+ .macro LOCK_PREFIX
+672: lock
+ .pushsection .smp_locks,"a"
+ .balign 4
+ .long 672b - .
+ .popsection
+ .endm
+#else
+ .macro LOCK_PREFIX
+ .endm
+#endif
+
+/*
+ * objtool annotation to ignore the alternatives and only consider the original
+ * instruction(s).
+ */
+.macro ANNOTATE_IGNORE_ALTERNATIVE
+ .Lannotate_\@:
+ .pushsection .discard.ignore_alts
+ .long .Lannotate_\@ - .
+ .popsection
+.endm
+
+/*
+ * Issue one struct alt_instr descriptor entry (need to put it into
+ * the section .altinstructions, see below). This entry contains
+ * enough information for the alternatives patching code to patch an
+ * instruction. See apply_alternatives().
+ */
+.macro altinstruction_entry orig alt feature orig_len alt_len pad_len
+ .long \orig - .
+ .long \alt - .
+ .word \feature
+ .byte \orig_len
+ .byte \alt_len
+ .byte \pad_len
+.endm
+
+/*
+ * Define an alternative between two instructions. If @feature is
+ * present, early code in apply_alternatives() replaces @oldinstr with
+ * @newinstr. ".skip" directive takes care of proper instruction padding
+ * in case @newinstr is longer than @oldinstr.
+ */
+.macro ALTERNATIVE oldinstr, newinstr, feature
+140:
+ \oldinstr
+141:
+ .skip -(((144f-143f)-(141b-140b)) > 0) * ((144f-143f)-(141b-140b)),0x90
+142:
+
+ .pushsection .altinstructions,"a"
+ altinstruction_entry 140b,143f,\feature,142b-140b,144f-143f,142b-141b
+ .popsection
+
+ .pushsection .altinstr_replacement,"ax"
+143:
+ \newinstr
+144:
+ .popsection
+.endm
+
+#define old_len 141b-140b
+#define new_len1 144f-143f
+#define new_len2 145f-144f
+
+/*
+ * gas compatible max based on the idea from:
+ * http://graphics.stanford.edu/~seander/bithacks.html#IntegerMinOrMax
+ *
+ * The additional "-" is needed because gas uses a "true" value of -1.
+ */
+#define alt_max_short(a, b) ((a) ^ (((a) ^ (b)) & -(-((a) < (b)))))
+
+/*
+ * Same as ALTERNATIVE macro above but for two alternatives. If CPU
+ * has @feature1, it replaces @oldinstr with @newinstr1. If CPU has
+ * @feature2, it replaces @oldinstr with @feature2.
+ */
+.macro ALTERNATIVE_2 oldinstr, newinstr1, feature1, newinstr2, feature2
+140:
+ \oldinstr
+141:
+ .skip -((alt_max_short(new_len1, new_len2) - (old_len)) > 0) * \
+ (alt_max_short(new_len1, new_len2) - (old_len)),0x90
+142:
+
+ .pushsection .altinstructions,"a"
+ altinstruction_entry 140b,143f,\feature1,142b-140b,144f-143f,142b-141b
+ altinstruction_entry 140b,144f,\feature2,142b-140b,145f-144f,142b-141b
+ .popsection
+
+ .pushsection .altinstr_replacement,"ax"
+143:
+ \newinstr1
+144:
+ \newinstr2
+145:
+ .popsection
+.endm
+
+#define ALTERNATIVE_TERNARY(oldinstr, feature, newinstr1, newinstr2) \
+ ALTERNATIVE_2 oldinstr, newinstr2, X86_FEATURE_ALWAYS, \
+ newinstr1, feature
+
#endif /* __ASSEMBLY__ */
#endif /* _ASM_X86_ALTERNATIVE_H */
diff --git a/arch/x86/include/asm/nospec-branch.h
b/arch/x86/include/asm/nospec-branch.h
index cb9ad6b73973..529f8e9380d8 100644
--- a/arch/x86/include/asm/nospec-branch.h
+++ b/arch/x86/include/asm/nospec-branch.h
@@ -7,7 +7,6 @@
#include <linux/objtool.h>
#include <asm/alternative.h>
-#include <asm/alternative-asm.h>
#include <asm/cpufeatures.h>
#include <asm/msr-index.h>
#include <asm/unwind_hints.h>
diff --git a/arch/x86/include/asm/smap.h b/arch/x86/include/asm/smap.h
index 8b58d6975d5d..ea1d8eb644cb 100644
--- a/arch/x86/include/asm/smap.h
+++ b/arch/x86/include/asm/smap.h
@@ -11,6 +11,7 @@
#include <asm/nops.h>
#include <asm/cpufeatures.h>
+#include <asm/alternative.h>
/* "Raw" instruction opcodes */
#define __ASM_CLAC ".byte 0x0f,0x01,0xca"
@@ -18,8 +19,6 @@
#ifdef __ASSEMBLY__
-#include <asm/alternative-asm.h>
-
#ifdef CONFIG_X86_SMAP
#define ASM_CLAC \
@@ -37,8 +36,6 @@
#else /* __ASSEMBLY__ */
-#include <asm/alternative.h>
-
#ifdef CONFIG_X86_SMAP
static __always_inline void clac(void)
diff --git a/arch/x86/lib/atomic64_386_32.S b/arch/x86/lib/atomic64_386_32.S
index 3b6544111ac9..16bc9130e7a5 100644
--- a/arch/x86/lib/atomic64_386_32.S
+++ b/arch/x86/lib/atomic64_386_32.S
@@ -6,7 +6,7 @@
*/
#include <linux/linkage.h>
-#include <asm/alternative-asm.h>
+#include <asm/alternative.h>
/* if you want SMP support, implement these with real spinlocks */
.macro LOCK reg
diff --git a/arch/x86/lib/atomic64_cx8_32.S b/arch/x86/lib/atomic64_cx8_32.S
index 1c5c81c16b06..ce6935690766 100644
--- a/arch/x86/lib/atomic64_cx8_32.S
+++ b/arch/x86/lib/atomic64_cx8_32.S
@@ -6,7 +6,7 @@
*/
#include <linux/linkage.h>
-#include <asm/alternative-asm.h>
+#include <asm/alternative.h>
.macro read64 reg
movl %ebx, %eax
diff --git a/arch/x86/lib/copy_page_64.S b/arch/x86/lib/copy_page_64.S
index 2402d4c489d2..db4b4f9197c7 100644
--- a/arch/x86/lib/copy_page_64.S
+++ b/arch/x86/lib/copy_page_64.S
@@ -3,7 +3,7 @@
#include <linux/linkage.h>
#include <asm/cpufeatures.h>
-#include <asm/alternative-asm.h>
+#include <asm/alternative.h>
#include <asm/export.h>
/*
diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index 77b9b2a3b5c8..57b79c577496 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -11,7 +11,7 @@
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
#include <asm/cpufeatures.h>
-#include <asm/alternative-asm.h>
+#include <asm/alternative.h>
#include <asm/asm.h>
#include <asm/smap.h>
#include <asm/export.h>
diff --git a/arch/x86/lib/memcpy_64.S b/arch/x86/lib/memcpy_64.S
index 1e299ac73c86..1cc9da6e29c7 100644
--- a/arch/x86/lib/memcpy_64.S
+++ b/arch/x86/lib/memcpy_64.S
@@ -4,7 +4,7 @@
#include <linux/linkage.h>
#include <asm/errno.h>
#include <asm/cpufeatures.h>
-#include <asm/alternative-asm.h>
+#include <asm/alternative.h>
#include <asm/export.h>
.pushsection .noinstr.text, "ax"
diff --git a/arch/x86/lib/memmove_64.S b/arch/x86/lib/memmove_64.S
index 41902fe8b859..64801010d312 100644
--- a/arch/x86/lib/memmove_64.S
+++ b/arch/x86/lib/memmove_64.S
@@ -8,7 +8,7 @@
*/
#include <linux/linkage.h>
#include <asm/cpufeatures.h>
-#include <asm/alternative-asm.h>
+#include <asm/alternative.h>
#include <asm/export.h>
#undef memmove
diff --git a/arch/x86/lib/memset_64.S b/arch/x86/lib/memset_64.S
index 0bfd26e4ca9e..9827ae267f96 100644
--- a/arch/x86/lib/memset_64.S
+++ b/arch/x86/lib/memset_64.S
@@ -3,7 +3,7 @@
#include <linux/linkage.h>
#include <asm/cpufeatures.h>
-#include <asm/alternative-asm.h>
+#include <asm/alternative.h>
#include <asm/export.h>
/*
diff --git a/arch/x86/lib/retpoline.S b/arch/x86/lib/retpoline.S
index f6fb1d218dcc..6bb74b5c238c 100644
--- a/arch/x86/lib/retpoline.S
+++ b/arch/x86/lib/retpoline.S
@@ -4,7 +4,7 @@
#include <linux/linkage.h>
#include <asm/dwarf2.h>
#include <asm/cpufeatures.h>
-#include <asm/alternative-asm.h>
+#include <asm/alternative.h>
#include <asm/export.h>
#include <asm/nospec-branch.h>
#include <asm/unwind_hints.h>
--
2.26.2
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |