[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [PATCH v2 05/10] arm/gic: Get rid of READ/WRITE_SYSREG32
On 27/04/2021 10:35, Michal Orzel wrote: AArch64 registers are 64bit whereas AArch32 registers are 32bit or 64bit. MSR/MRS are expecting 64bit values thus we should get rid of helpers READ/WRITE_SYSREG32 in favour of using READ/WRITE_SYSREG. We should also use register_t type when reading sysregs which can correspond to uint64_t or uint32_t. Even though many AArch64 registers have upper 32bit reserved it does not mean that they can't be widen in the future. Modify types of following members of struct gic_v3 to register_t: -vmcr -sre_el1 -apr0 -apr1 Add new macro GICC_IAR_INTID_MASK containing the mask for INTID field of ICC_IAR0/1_EL1 register. Signed-off-by: Michal Orzel <michal.orzel@xxxxxxx> --- Changes since v1: -Remove hcr member of gic_v3 in a seperate patch -Add macro GICC_IAR_INTID_MASK This change needs to be explained in the commit message. Saying something like: "Only the first 23-bits of IAR contains the interrupt number. The rest are RES0. Therefore, take the opportunity to mask the bits [23:31] as they should be used for an IRQ number (we don't know how the top bits will be used). " -Remove explicit cast in favor of implicit cast --- xen/arch/arm/gic-v3-lpi.c | 2 +- xen/arch/arm/gic-v3.c | 98 ++++++++++++++++--------------- xen/include/asm-arm/gic.h | 6 +- xen/include/asm-arm/gic_v3_defs.h | 2 + 4 files changed, 58 insertions(+), 50 deletions(-) diff --git a/xen/arch/arm/gic-v3-lpi.c b/xen/arch/arm/gic-v3-lpi.c index 869bc97fa1..e1594dd20e 100644 --- a/xen/arch/arm/gic-v3-lpi.c +++ b/xen/arch/arm/gic-v3-lpi.c @@ -178,7 +178,7 @@ void gicv3_do_LPI(unsigned int lpi) irq_enter();/* EOI the LPI already. */- WRITE_SYSREG32(lpi, ICC_EOIR1_EL1); + WRITE_SYSREG(lpi, ICC_EOIR1_EL1);/* Find out if a guest mapped something to this physical LPI. */hlpip = gic_get_host_lpi(lpi); diff --git a/xen/arch/arm/gic-v3.c b/xen/arch/arm/gic-v3.c index ac28013c19..b86f040589 100644 --- a/xen/arch/arm/gic-v3.c +++ b/xen/arch/arm/gic-v3.c @@ -246,12 +246,12 @@ static void gicv3_ich_write_lr(int lr, uint64_t val) */ static void gicv3_enable_sre(void) { - uint32_t val; + register_t val;- val = READ_SYSREG32(ICC_SRE_EL2);+ val = READ_SYSREG(ICC_SRE_EL2); val |= GICC_SRE_EL2_SRE;- WRITE_SYSREG32(val, ICC_SRE_EL2);+ WRITE_SYSREG(val, ICC_SRE_EL2); isb(); }@@ -315,16 +315,16 @@ static void restore_aprn_regs(const union gic_state_data *d)switch ( gicv3.nr_priorities ) { case 7: - WRITE_SYSREG32(d->v3.apr0[2], ICH_AP0R2_EL2); - WRITE_SYSREG32(d->v3.apr1[2], ICH_AP1R2_EL2); + WRITE_SYSREG(d->v3.apr0[2], ICH_AP0R2_EL2); + WRITE_SYSREG(d->v3.apr1[2], ICH_AP1R2_EL2); /* Fall through */ case 6: - WRITE_SYSREG32(d->v3.apr0[1], ICH_AP0R1_EL2); - WRITE_SYSREG32(d->v3.apr1[1], ICH_AP1R1_EL2); + WRITE_SYSREG(d->v3.apr0[1], ICH_AP0R1_EL2); + WRITE_SYSREG(d->v3.apr1[1], ICH_AP1R1_EL2); /* Fall through */ case 5: - WRITE_SYSREG32(d->v3.apr0[0], ICH_AP0R0_EL2); - WRITE_SYSREG32(d->v3.apr1[0], ICH_AP1R0_EL2); + WRITE_SYSREG(d->v3.apr0[0], ICH_AP0R0_EL2); + WRITE_SYSREG(d->v3.apr1[0], ICH_AP1R0_EL2); break; default: BUG(); @@ -338,16 +338,16 @@ static void save_aprn_regs(union gic_state_data *d) switch ( gicv3.nr_priorities ) { case 7: - d->v3.apr0[2] = READ_SYSREG32(ICH_AP0R2_EL2); - d->v3.apr1[2] = READ_SYSREG32(ICH_AP1R2_EL2); + d->v3.apr0[2] = READ_SYSREG(ICH_AP0R2_EL2); + d->v3.apr1[2] = READ_SYSREG(ICH_AP1R2_EL2); /* Fall through */ case 6: - d->v3.apr0[1] = READ_SYSREG32(ICH_AP0R1_EL2); - d->v3.apr1[1] = READ_SYSREG32(ICH_AP1R1_EL2); + d->v3.apr0[1] = READ_SYSREG(ICH_AP0R1_EL2); + d->v3.apr1[1] = READ_SYSREG(ICH_AP1R1_EL2); /* Fall through */ case 5: - d->v3.apr0[0] = READ_SYSREG32(ICH_AP0R0_EL2); - d->v3.apr1[0] = READ_SYSREG32(ICH_AP1R0_EL2); + d->v3.apr0[0] = READ_SYSREG(ICH_AP0R0_EL2); + d->v3.apr1[0] = READ_SYSREG(ICH_AP1R0_EL2); break; default: BUG(); @@ -371,15 +371,15 @@ static void gicv3_save_state(struct vcpu *v) dsb(sy); gicv3_save_lrs(v); save_aprn_regs(&v->arch.gic); - v->arch.gic.v3.vmcr = READ_SYSREG32(ICH_VMCR_EL2); - v->arch.gic.v3.sre_el1 = READ_SYSREG32(ICC_SRE_EL1); + v->arch.gic.v3.vmcr = READ_SYSREG(ICH_VMCR_EL2); + v->arch.gic.v3.sre_el1 = READ_SYSREG(ICC_SRE_EL1); }static void gicv3_restore_state(const struct vcpu *v){ - uint32_t val; + register_t val;- val = READ_SYSREG32(ICC_SRE_EL2);+ val = READ_SYSREG(ICC_SRE_EL2); /* * Don't give access to system registers when the guest is using * GICv2 @@ -388,7 +388,7 @@ static void gicv3_restore_state(const struct vcpu *v) val &= ~GICC_SRE_EL2_ENEL1; else val |= GICC_SRE_EL2_ENEL1; - WRITE_SYSREG32(val, ICC_SRE_EL2); + WRITE_SYSREG(val, ICC_SRE_EL2);/** VFIQEn is RES1 if ICC_SRE_EL1.SRE is 1. This causes a Group0 @@ -398,9 +398,9 @@ static void gicv3_restore_state(const struct vcpu *v) * want before starting to mess with the rest of the GIC, and * VMCR_EL1 in particular. */ - WRITE_SYSREG32(v->arch.gic.v3.sre_el1, ICC_SRE_EL1); + WRITE_SYSREG(v->arch.gic.v3.sre_el1, ICC_SRE_EL1); isb(); - WRITE_SYSREG32(v->arch.gic.v3.vmcr, ICH_VMCR_EL2); + WRITE_SYSREG(v->arch.gic.v3.vmcr, ICH_VMCR_EL2); restore_aprn_regs(&v->arch.gic); gicv3_restore_lrs(v);@@ -468,24 +468,25 @@ static void gicv3_mask_irq(struct irq_desc *irqd)static void gicv3_eoi_irq(struct irq_desc *irqd) { /* Lower the priority */ - WRITE_SYSREG32(irqd->irq, ICC_EOIR1_EL1); + WRITE_SYSREG(irqd->irq, ICC_EOIR1_EL1); isb(); }static void gicv3_dir_irq(struct irq_desc *irqd){ /* Deactivate */ - WRITE_SYSREG32(irqd->irq, ICC_DIR_EL1); + WRITE_SYSREG(irqd->irq, ICC_DIR_EL1); isb(); }static unsigned int gicv3_read_irq(void){ - unsigned int irq = READ_SYSREG32(ICC_IAR1_EL1); + register_t irq = READ_SYSREG(ICC_IAR1_EL1);dsb(sy); - return irq;+ /* IRQs are encoded using 23bit. */ + return (irq & GICC_IAR_INTID_MASK); }/*@@ -857,16 +858,16 @@ static int gicv3_cpu_init(void) gicv3_enable_sre();/* No priority grouping */- WRITE_SYSREG32(0, ICC_BPR1_EL1); + WRITE_SYSREG(0, ICC_BPR1_EL1);/* Set priority mask register */- WRITE_SYSREG32(DEFAULT_PMR_VALUE, ICC_PMR_EL1); + WRITE_SYSREG(DEFAULT_PMR_VALUE, ICC_PMR_EL1);/* EOI drops priority, DIR deactivates the interrupt (mode 1) */- WRITE_SYSREG32(GICC_CTLR_EL1_EOImode_drop, ICC_CTLR_EL1); + WRITE_SYSREG(GICC_CTLR_EL1_EOImode_drop, ICC_CTLR_EL1);/* Enable Group1 interrupts */- WRITE_SYSREG32(1, ICC_IGRPEN1_EL1); + WRITE_SYSREG(1, ICC_IGRPEN1_EL1);/* Sync at once at the end of cpu interface configuration */isb(); @@ -876,15 +877,15 @@ static int gicv3_cpu_init(void)static void gicv3_cpu_disable(void){ - WRITE_SYSREG32(0, ICC_CTLR_EL1); + WRITE_SYSREG(0, ICC_CTLR_EL1); isb(); }static void gicv3_hyp_init(void){ - uint32_t vtr; + register_t vtr;- vtr = READ_SYSREG32(ICH_VTR_EL2);+ vtr = READ_SYSREG(ICH_VTR_EL2); gicv3_info.nr_lrs = (vtr & ICH_VTR_NRLRGS) + 1; gicv3.nr_priorities = ((vtr >> ICH_VTR_PRIBITS_SHIFT) & ICH_VTR_PRIBITS_MASK) + 1; @@ -892,8 +893,8 @@ static void gicv3_hyp_init(void) if ( !((gicv3.nr_priorities > 4) && (gicv3.nr_priorities < 8)) ) panic("GICv3: Invalid number of priority bits\n");- WRITE_SYSREG32(ICH_VMCR_EOI | ICH_VMCR_VENG1, ICH_VMCR_EL2);- WRITE_SYSREG32(GICH_HCR_EN, ICH_HCR_EL2); + WRITE_SYSREG(ICH_VMCR_EOI | ICH_VMCR_VENG1, ICH_VMCR_EL2); + WRITE_SYSREG(GICH_HCR_EN, ICH_HCR_EL2); }/* Set up the per-CPU parts of the GIC for a secondary CPU */@@ -917,11 +918,11 @@ out:static void gicv3_hyp_disable(void){ - uint32_t hcr; + register_t hcr;- hcr = READ_SYSREG32(ICH_HCR_EL2);+ hcr = READ_SYSREG(ICH_HCR_EL2); hcr &= ~GICH_HCR_EN; - WRITE_SYSREG32(hcr, ICH_HCR_EL2); + WRITE_SYSREG(hcr, ICH_HCR_EL2); isb(); }@@ -1140,39 +1141,44 @@ static void gicv3_write_lr(int lr_reg, const struct gic_lr *lr) static void gicv3_hcr_status(uint32_t flag, bool status){ - uint32_t hcr; + register_t hcr;- hcr = READ_SYSREG32(ICH_HCR_EL2);+ hcr = READ_SYSREG(ICH_HCR_EL2); if ( status ) - WRITE_SYSREG32(hcr | flag, ICH_HCR_EL2); + WRITE_SYSREG(hcr | flag, ICH_HCR_EL2); else - WRITE_SYSREG32(hcr & (~flag), ICH_HCR_EL2); + WRITE_SYSREG(hcr & (~flag), ICH_HCR_EL2); isb(); }static unsigned int gicv3_read_vmcr_priority(void){ - return ((READ_SYSREG32(ICH_VMCR_EL2) >> ICH_VMCR_PRIORITY_SHIFT) & + return ((READ_SYSREG(ICH_VMCR_EL2) >> ICH_VMCR_PRIORITY_SHIFT) & ICH_VMCR_PRIORITY_MASK); }/* Only support reading GRP1 APRn registers */static unsigned int gicv3_read_apr(int apr_reg) { + register_t apr; + switch ( apr_reg ) { case 0: ASSERT(gicv3.nr_priorities > 4 && gicv3.nr_priorities < 8); - return READ_SYSREG32(ICH_AP1R0_EL2); + apr = READ_SYSREG(ICH_AP1R0_EL2); case 1: ASSERT(gicv3.nr_priorities > 5 && gicv3.nr_priorities < 8); - return READ_SYSREG32(ICH_AP1R1_EL2); + apr = READ_SYSREG(ICH_AP1R1_EL2); case 2: ASSERT(gicv3.nr_priorities > 6 && gicv3.nr_priorities < 8); - return READ_SYSREG32(ICH_AP1R2_EL2); + apr = READ_SYSREG(ICH_AP1R2_EL2); default: BUG(); } + + /* Number of priority levels do not exceed 32bit. */ + return apr; }static bool gicv3_read_pending_state(struct irq_desc *irqd)diff --git a/xen/include/asm-arm/gic.h b/xen/include/asm-arm/gic.h index 5069ab4aac..c7f0c343d1 100644 --- a/xen/include/asm-arm/gic.h +++ b/xen/include/asm-arm/gic.h @@ -171,9 +171,9 @@ * GICv3 registers that needs to be saved/restored */ struct gic_v3 { - uint32_t vmcr, sre_el1; - uint32_t apr0[4]; - uint32_t apr1[4]; + register_t vmcr, sre_el1; + register_t apr0[4]; + register_t apr1[4]; uint64_t lr[16]; }; #endif diff --git a/xen/include/asm-arm/gic_v3_defs.h b/xen/include/asm-arm/gic_v3_defs.h index 5a578e7c11..34ed5f857d 100644 --- a/xen/include/asm-arm/gic_v3_defs.h +++ b/xen/include/asm-arm/gic_v3_defs.h @@ -45,6 +45,8 @@ #define GICC_SRE_EL2_DIB (1UL << 2) #define GICC_SRE_EL2_ENEL1 (1UL << 3)+#define GICC_IAR_INTID_MASK (0xFFFFFF)+ /* Additional bits in GICD_TYPER defined by GICv3 */ #define GICD_TYPE_ID_BITS_SHIFT 19 #define GICD_TYPE_ID_BITS(r) ((((r) >> GICD_TYPE_ID_BITS_SHIFT) & 0x1f) + 1) -- Julien Grall
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |