[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [PATCH v7 04/15] swiotlb: Add restricted DMA pool initialization
On Thu, May 20, 2021 at 2:54 AM Florian Fainelli <f.fainelli@xxxxxxxxx> wrote: > > > > On 5/17/2021 11:42 PM, Claire Chang wrote: > > Add the initialization function to create restricted DMA pools from > > matching reserved-memory nodes. > > > > Signed-off-by: Claire Chang <tientzu@xxxxxxxxxxxx> > > --- > > include/linux/device.h | 4 +++ > > include/linux/swiotlb.h | 3 +- > > kernel/dma/swiotlb.c | 76 +++++++++++++++++++++++++++++++++++++++++ > > 3 files changed, 82 insertions(+), 1 deletion(-) > > > > diff --git a/include/linux/device.h b/include/linux/device.h > > index 38a2071cf776..4987608ea4ff 100644 > > --- a/include/linux/device.h > > +++ b/include/linux/device.h > > @@ -416,6 +416,7 @@ struct dev_links_info { > > * @dma_pools: Dma pools (if dma'ble device). > > * @dma_mem: Internal for coherent mem override. > > * @cma_area: Contiguous memory area for dma allocations > > + * @dma_io_tlb_mem: Internal for swiotlb io_tlb_mem override. > > * @archdata: For arch-specific additions. > > * @of_node: Associated device tree node. > > * @fwnode: Associated device node supplied by platform firmware. > > @@ -521,6 +522,9 @@ struct device { > > #ifdef CONFIG_DMA_CMA > > struct cma *cma_area; /* contiguous memory area for dma > > allocations */ > > +#endif > > +#ifdef CONFIG_DMA_RESTRICTED_POOL > > + struct io_tlb_mem *dma_io_tlb_mem; > > #endif > > /* arch specific additions */ > > struct dev_archdata archdata; > > diff --git a/include/linux/swiotlb.h b/include/linux/swiotlb.h > > index 216854a5e513..03ad6e3b4056 100644 > > --- a/include/linux/swiotlb.h > > +++ b/include/linux/swiotlb.h > > @@ -72,7 +72,8 @@ extern enum swiotlb_force swiotlb_force; > > * range check to see if the memory was in fact allocated by this > > * API. > > * @nslabs: The number of IO TLB blocks (in groups of 64) between @start > > and > > - * @end. This is command line adjustable via setup_io_tlb_npages. > > + * @end. For default swiotlb, this is command line adjustable via > > + * setup_io_tlb_npages. > > * @used: The number of used IO TLB block. > > * @list: The free list describing the number of free entries available > > * from each index. > > diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c > > index b849b01a446f..1d8eb4de0d01 100644 > > --- a/kernel/dma/swiotlb.c > > +++ b/kernel/dma/swiotlb.c > > @@ -39,6 +39,13 @@ > > #ifdef CONFIG_DEBUG_FS > > #include <linux/debugfs.h> > > #endif > > +#ifdef CONFIG_DMA_RESTRICTED_POOL > > +#include <linux/io.h> > > +#include <linux/of.h> > > +#include <linux/of_fdt.h> > > +#include <linux/of_reserved_mem.h> > > +#include <linux/slab.h> > > +#endif > > > > #include <asm/io.h> > > #include <asm/dma.h> > > @@ -690,3 +697,72 @@ static int __init swiotlb_create_default_debugfs(void) > > late_initcall(swiotlb_create_default_debugfs); > > > > #endif > > + > > +#ifdef CONFIG_DMA_RESTRICTED_POOL > > +static int rmem_swiotlb_device_init(struct reserved_mem *rmem, > > + struct device *dev) > > +{ > > + struct io_tlb_mem *mem = rmem->priv; > > + unsigned long nslabs = rmem->size >> IO_TLB_SHIFT; > > + > > + if (dev->dma_io_tlb_mem) > > + return 0; > > + > > + /* > > + * Since multiple devices can share the same pool, the private data, > > + * io_tlb_mem struct, will be initialized by the first device attached > > + * to it. > > + */ > > + if (!mem) { > > + mem = kzalloc(struct_size(mem, slots, nslabs), GFP_KERNEL); > > + if (!mem) > > + return -ENOMEM; > > + > > + if (PageHighMem(pfn_to_page(PHYS_PFN(rmem->base)))) { > > + kfree(mem); > > + return -EINVAL; > > This could probably deserve a warning here to indicate that the reserved > area must be accessible within the linear mapping as I would expect a > lot of people to trip over that. Ok. Will add it. > > Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx> > -- > Florian
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |