[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH v3 05/17] xen/arm: Add PHYSDEVOP_pci_device_* support for ARM



Hardware domain is in charge of doing the PCI enumeration and will
discover the PCI devices and then will communicate to XEN via hyper
call PHYSDEVOP_pci_device_add(..) to add the PCI devices in XEN.

Also implement PHYSDEVOP_pci_device_remove(..) to remove the PCI device.

As most of the code for PHYSDEVOP_pci_device_* is the same between x86
and ARM, move the code to a common file to avoid duplication.

Signed-off-by: Rahul Singh <rahul.singh@xxxxxxx>
---
Change in v3: Fixed minor comment.
Change in v2:
- Add support for PHYSDEVOP_pci_device_remove()
- Move code to common code
---
 xen/arch/arm/physdev.c          |  5 +-
 xen/arch/x86/physdev.c          | 50 +-------------------
 xen/arch/x86/x86_64/physdev.c   |  4 +-
 xen/common/Makefile             |  1 +
 xen/common/physdev.c            | 81 +++++++++++++++++++++++++++++++++
 xen/include/asm-arm/hypercall.h |  2 -
 xen/include/asm-arm/numa.h      |  5 ++
 xen/include/asm-x86/hypercall.h |  9 ++--
 xen/include/xen/hypercall.h     |  8 ++++
 9 files changed, 106 insertions(+), 59 deletions(-)
 create mode 100644 xen/common/physdev.c

diff --git a/xen/arch/arm/physdev.c b/xen/arch/arm/physdev.c
index e91355fe22..4e00b03aab 100644
--- a/xen/arch/arm/physdev.c
+++ b/xen/arch/arm/physdev.c
@@ -8,10 +8,9 @@
 #include <xen/lib.h>
 #include <xen/errno.h>
 #include <xen/sched.h>
-#include <asm/hypercall.h>
+#include <xen/hypercall.h>
 
-
-int do_physdev_op(int cmd, XEN_GUEST_HANDLE_PARAM(void) arg)
+long arch_physdev_op(int cmd, XEN_GUEST_HANDLE_PARAM(void) arg)
 {
     gdprintk(XENLOG_DEBUG, "PHYSDEVOP cmd=%d: not implemented\n", cmd);
     return -ENOSYS;
diff --git a/xen/arch/x86/physdev.c b/xen/arch/x86/physdev.c
index 23465bcd00..c00cc99404 100644
--- a/xen/arch/x86/physdev.c
+++ b/xen/arch/x86/physdev.c
@@ -174,7 +174,7 @@ int physdev_unmap_pirq(domid_t domid, int pirq)
 }
 #endif /* COMPAT */
 
-ret_t do_physdev_op(int cmd, XEN_GUEST_HANDLE_PARAM(void) arg)
+ret_t arch_physdev_op(int cmd, XEN_GUEST_HANDLE_PARAM(void) arg)
 {
     int irq;
     ret_t ret;
@@ -480,54 +480,6 @@ ret_t do_physdev_op(int cmd, XEN_GUEST_HANDLE_PARAM(void) 
arg)
         break;
     }
 
-    case PHYSDEVOP_pci_device_add: {
-        struct physdev_pci_device_add add;
-        struct pci_dev_info pdev_info;
-        nodeid_t node;
-
-        ret = -EFAULT;
-        if ( copy_from_guest(&add, arg, 1) != 0 )
-            break;
-
-        pdev_info.is_extfn = !!(add.flags & XEN_PCI_DEV_EXTFN);
-        if ( add.flags & XEN_PCI_DEV_VIRTFN )
-        {
-            pdev_info.is_virtfn = 1;
-            pdev_info.physfn.bus = add.physfn.bus;
-            pdev_info.physfn.devfn = add.physfn.devfn;
-        }
-        else
-            pdev_info.is_virtfn = 0;
-
-        if ( add.flags & XEN_PCI_DEV_PXM )
-        {
-            uint32_t pxm;
-            size_t optarr_off = offsetof(struct physdev_pci_device_add, 
optarr) /
-                                sizeof(add.optarr[0]);
-
-            if ( copy_from_guest_offset(&pxm, arg, optarr_off, 1) )
-                break;
-
-            node = pxm_to_node(pxm);
-        }
-        else
-            node = NUMA_NO_NODE;
-
-        ret = pci_add_device(add.seg, add.bus, add.devfn, &pdev_info, node);
-        break;
-    }
-
-    case PHYSDEVOP_pci_device_remove: {
-        struct physdev_pci_device dev;
-
-        ret = -EFAULT;
-        if ( copy_from_guest(&dev, arg, 1) != 0 )
-            break;
-
-        ret = pci_remove_device(dev.seg, dev.bus, dev.devfn);
-        break;
-    }
-
     case PHYSDEVOP_prepare_msix:
     case PHYSDEVOP_release_msix: {
         struct physdev_pci_device dev;
diff --git a/xen/arch/x86/x86_64/physdev.c b/xen/arch/x86/x86_64/physdev.c
index 0a50cbd4d8..5f72652ff7 100644
--- a/xen/arch/x86/x86_64/physdev.c
+++ b/xen/arch/x86/x86_64/physdev.c
@@ -9,9 +9,10 @@ EMIT_FILE;
 #include <compat/xen.h>
 #include <compat/event_channel.h>
 #include <compat/physdev.h>
-#include <asm/hypercall.h>
+#include <xen/hypercall.h>
 
 #define do_physdev_op compat_physdev_op
+#define arch_physdev_op arch_compat_physdev_op
 
 #define physdev_apic               compat_physdev_apic
 #define physdev_apic_t             physdev_apic_compat_t
@@ -82,6 +83,7 @@ CHECK_physdev_pci_device
 typedef int ret_t;
 
 #include "../physdev.c"
+#include "../../../common/physdev.c"
 
 /*
  * Local variables:
diff --git a/xen/common/Makefile b/xen/common/Makefile
index 54de70d422..bcb1c8fb03 100644
--- a/xen/common/Makefile
+++ b/xen/common/Makefile
@@ -29,6 +29,7 @@ obj-y += notifier.o
 obj-y += page_alloc.o
 obj-$(CONFIG_HAS_PDX) += pdx.o
 obj-$(CONFIG_PERF_COUNTERS) += perfc.o
+obj-y += physdev.o
 obj-y += preempt.o
 obj-y += random.o
 obj-y += rangeset.o
diff --git a/xen/common/physdev.c b/xen/common/physdev.c
new file mode 100644
index 0000000000..20a5530269
--- /dev/null
+++ b/xen/common/physdev.c
@@ -0,0 +1,81 @@
+
+#include <xen/guest_access.h>
+#include <xen/hypercall.h>
+#include <xen/init.h>
+
+#ifndef COMPAT
+typedef long ret_t;
+#endif
+
+ret_t do_physdev_op(int cmd, XEN_GUEST_HANDLE_PARAM(void) arg)
+{
+    ret_t ret;
+
+    switch ( cmd )
+    {
+#ifdef CONFIG_HAS_PCI
+    case PHYSDEVOP_pci_device_add: {
+        struct physdev_pci_device_add add;
+        struct pci_dev_info pdev_info;
+        nodeid_t node;
+
+        ret = -EFAULT;
+        if ( copy_from_guest(&add, arg, 1) != 0 )
+            break;
+
+        pdev_info.is_extfn = !!(add.flags & XEN_PCI_DEV_EXTFN);
+        if ( add.flags & XEN_PCI_DEV_VIRTFN )
+        {
+            pdev_info.is_virtfn = 1;
+            pdev_info.physfn.bus = add.physfn.bus;
+            pdev_info.physfn.devfn = add.physfn.devfn;
+        }
+        else
+            pdev_info.is_virtfn = 0;
+
+        if ( add.flags & XEN_PCI_DEV_PXM )
+        {
+            uint32_t pxm;
+            size_t optarr_off = offsetof(struct physdev_pci_device_add, 
optarr) /
+                                sizeof(add.optarr[0]);
+
+            if ( copy_from_guest_offset(&pxm, arg, optarr_off, 1) )
+                break;
+
+            node = pxm_to_node(pxm);
+        }
+        else
+            node = NUMA_NO_NODE;
+
+        ret = pci_add_device(add.seg, add.bus, add.devfn, &pdev_info, node);
+        break;
+    }
+
+    case PHYSDEVOP_pci_device_remove: {
+        struct physdev_pci_device dev;
+
+        ret = -EFAULT;
+        if ( copy_from_guest(&dev, arg, 1) != 0 )
+            break;
+
+        ret = pci_remove_device(dev.seg, dev.bus, dev.devfn);
+        break;
+    }
+#endif
+    default:
+        ret = arch_physdev_op(cmd, arg);
+        break;
+    }
+
+    return ret;
+}
+
+/*
+ * Local variables:
+ * mode: C
+ * c-file-style: "BSD"
+ * c-basic-offset: 4
+ * tab-width: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
diff --git a/xen/include/asm-arm/hypercall.h b/xen/include/asm-arm/hypercall.h
index a0c5a31a2f..c6e4a04fd6 100644
--- a/xen/include/asm-arm/hypercall.h
+++ b/xen/include/asm-arm/hypercall.h
@@ -2,8 +2,6 @@
 #define __ASM_ARM_HYPERCALL_H__
 
 #include <public/domctl.h> /* for arch_do_domctl */
-int do_physdev_op(int cmd, XEN_GUEST_HANDLE_PARAM(void) arg);
-
 long do_arm_vcpu_op(int cmd, unsigned int vcpuid, XEN_GUEST_HANDLE_PARAM(void) 
arg);
 
 long subarch_do_domctl(struct xen_domctl *domctl, struct domain *d,
diff --git a/xen/include/asm-arm/numa.h b/xen/include/asm-arm/numa.h
index 31a6de4e23..dbd1c2467f 100644
--- a/xen/include/asm-arm/numa.h
+++ b/xen/include/asm-arm/numa.h
@@ -25,6 +25,11 @@ extern mfn_t first_valid_mfn;
 #define node_start_pfn(nid) (mfn_x(first_valid_mfn))
 #define __node_distance(a, b) (20)
 
+static inline nodeid_t pxm_to_node(unsigned pxm)
+{
+    return 0xff;
+}
+
 #endif /* __ARCH_ARM_NUMA_H */
 /*
  * Local variables:
diff --git a/xen/include/asm-x86/hypercall.h b/xen/include/asm-x86/hypercall.h
index 0ae3b8b043..7afba98186 100644
--- a/xen/include/asm-x86/hypercall.h
+++ b/xen/include/asm-x86/hypercall.h
@@ -105,10 +105,6 @@ do_update_va_mapping(
     u64 val64,
     unsigned long flags);
 
-extern long
-do_physdev_op(
-    int cmd, XEN_GUEST_HANDLE_PARAM(void) arg);
-
 extern long
 do_update_va_mapping_otherdomain(
     unsigned long va,
@@ -151,6 +147,11 @@ compat_physdev_op(
     int cmd,
     XEN_GUEST_HANDLE_PARAM(void) arg);
 
+extern int
+arch_compat_physdev_op(
+    int cmd,
+    XEN_GUEST_HANDLE_PARAM(void) arg);
+
 extern int
 arch_compat_vcpu_op(
     int cmd, struct vcpu *v, XEN_GUEST_HANDLE_PARAM(void) arg);
diff --git a/xen/include/xen/hypercall.h b/xen/include/xen/hypercall.h
index 3771487a30..5cc74f40b7 100644
--- a/xen/include/xen/hypercall.h
+++ b/xen/include/xen/hypercall.h
@@ -45,6 +45,14 @@ extern long
 do_platform_op(
     XEN_GUEST_HANDLE_PARAM(xen_platform_op_t) u_xenpf_op);
 
+extern long
+do_physdev_op(
+    int cmd, XEN_GUEST_HANDLE_PARAM(void) arg);
+
+extern long
+arch_physdev_op(
+    int cmd, XEN_GUEST_HANDLE_PARAM(void) arg);
+
 /*
  * To allow safe resume of do_memory_op() after preemption, we need to know
  * at what point in the page list to resume. For this purpose I steal the
-- 
2.17.1




 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.