|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [PATCH v3 11/17] xen/arm: PCI host bridge discovery within XEN on ARM
On Tue, 28 Sep 2021, Rahul Singh wrote:
> XEN during boot will read the PCI device tree node “reg” property
> and will map the PCI config space to the XEN memory.
>
> As of now only "pci-host-ecam-generic" compatible board is supported.
>
> "linux,pci-domain" device tree property assigns a fixed PCI domain
> number to a host bridge, otherwise an unstable (across boots) unique
> number will be assigned by Linux. XEN access the PCI devices based on
> Segment:Bus:Device:Function. A Segment number in the XEN is same as a
> domain number in Linux. Segment number and domain number has to be in
> sync to access the correct PCI devices.
>
> XEN will read the “linux,pci-domain” property from the device tree node
> and configure the host bridge segment number accordingly. If this
> property is not available XEN will allocate the unique segment number
> to the host bridge.
>
> Signed-off-by: Rahul Singh <rahul.singh@xxxxxxx>
This is so much better! I only have one comment left below
> ---
> Change in v3:
> - Modify commit msg based on received comments.
> - Remove added struct match_table{} struct in struct device{}
> - Replace uint32_t sbdf to pci_sbdf_t sbdf to avoid typecast
> - Remove bus_start,bus_end and void *sysdata from struct pci_host_bridge{}
> - Move "#include <asm/pci.h>" in "xen/pci.h" after pci_sbdf_t sbdf declaration
> - Add pci_host_generic_probe() function
> Change in v2:
> - Add more info in commit msg
> - Add callback to parse register index.
> - Merge patch pci_ecam_operation into this patch to avoid confusion
> - Add new struct in struct device for match table
> ---
> xen/arch/arm/pci/Makefile | 4 +
> xen/arch/arm/pci/ecam.c | 61 +++++++
> xen/arch/arm/pci/pci-access.c | 83 ++++++++++
> xen/arch/arm/pci/pci-host-common.c | 247 ++++++++++++++++++++++++++++
> xen/arch/arm/pci/pci-host-generic.c | 46 ++++++
> xen/include/asm-arm/pci.h | 56 +++++++
> xen/include/xen/pci.h | 3 +-
> 7 files changed, 499 insertions(+), 1 deletion(-)
> create mode 100644 xen/arch/arm/pci/ecam.c
> create mode 100644 xen/arch/arm/pci/pci-access.c
> create mode 100644 xen/arch/arm/pci/pci-host-common.c
> create mode 100644 xen/arch/arm/pci/pci-host-generic.c
>
> diff --git a/xen/arch/arm/pci/Makefile b/xen/arch/arm/pci/Makefile
> index a98035df4c..6f32fbbe67 100644
> --- a/xen/arch/arm/pci/Makefile
> +++ b/xen/arch/arm/pci/Makefile
> @@ -1 +1,5 @@
> obj-y += pci.o
> +obj-y += pci-access.o
> +obj-y += pci-host-generic.o
> +obj-y += pci-host-common.o
> +obj-y += ecam.o
> diff --git a/xen/arch/arm/pci/ecam.c b/xen/arch/arm/pci/ecam.c
> new file mode 100644
> index 0000000000..602d00799c
> --- /dev/null
> +++ b/xen/arch/arm/pci/ecam.c
> @@ -0,0 +1,61 @@
> +/*
> + * Based on Linux drivers/pci/ecam.c
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <xen/pci.h>
> +#include <xen/sched.h>
> +
> +/*
> + * Function to implement the pci_ops->map_bus method.
> + */
> +void __iomem *pci_ecam_map_bus(struct pci_host_bridge *bridge,
> + pci_sbdf_t sbdf, uint32_t where)
> +{
> + const struct pci_config_window *cfg = bridge->cfg;
> + struct pci_ecam_ops *ops =
> + container_of(bridge->ops, struct pci_ecam_ops, pci_ops);
> + unsigned int devfn_shift = ops->bus_shift - 8;
> + void __iomem *base;
> +
> + unsigned int busn = PCI_BUS(sbdf.bdf);
> +
> + if ( busn < cfg->busn_start || busn > cfg->busn_end )
> + return NULL;
> +
> + busn -= cfg->busn_start;
> + base = cfg->win + (busn << ops->bus_shift);
> +
> + return base + (PCI_DEVFN2(sbdf.bdf) << devfn_shift) + where;
> +}
> +
> +/* ECAM ops */
> +const struct pci_ecam_ops pci_generic_ecam_ops = {
> + .bus_shift = 20,
> + .pci_ops = {
> + .map_bus = pci_ecam_map_bus,
> + .read = pci_generic_config_read,
> + .write = pci_generic_config_write,
> + }
> +};
> +
> +/*
> + * Local variables:
> + * mode: C
> + * c-file-style: "BSD"
> + * c-basic-offset: 4
> + * tab-width: 4
> + * indent-tabs-mode: nil
> + * End:
> + */
> diff --git a/xen/arch/arm/pci/pci-access.c b/xen/arch/arm/pci/pci-access.c
> new file mode 100644
> index 0000000000..3cd14a4b87
> --- /dev/null
> +++ b/xen/arch/arm/pci/pci-access.c
> @@ -0,0 +1,83 @@
> +/*
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <xen/pci.h>
> +#include <asm/io.h>
> +
> +#define INVALID_VALUE (~0U)
> +
> +int pci_generic_config_read(struct pci_host_bridge *bridge, pci_sbdf_t sbdf,
> + uint32_t reg, uint32_t len, uint32_t *value)
> +{
> + void __iomem *addr = bridge->ops->map_bus(bridge, sbdf, reg);
> +
> + if ( !addr )
> + {
> + *value = INVALID_VALUE;
> + return -ENODEV;
> + }
> +
> + switch ( len )
> + {
> + case 1:
> + *value = readb(addr);
> + break;
> + case 2:
> + *value = readw(addr);
> + break;
> + case 4:
> + *value = readl(addr);
> + break;
> + default:
> + ASSERT_UNREACHABLE();
> + }
> +
> + return 0;
> +}
> +
> +int pci_generic_config_write(struct pci_host_bridge *bridge, pci_sbdf_t sbdf,
> + uint32_t reg, uint32_t len, uint32_t value)
> +{
> + void __iomem *addr = bridge->ops->map_bus(bridge, sbdf, reg);
> +
> + if ( !addr )
> + return -ENODEV;
> +
> + switch ( len )
> + {
> + case 1:
> + writeb(value, addr);
> + break;
> + case 2:
> + writew(value, addr);
> + break;
> + case 4:
> + writel(value, addr);
> + break;
> + default:
> + ASSERT_UNREACHABLE();
> + }
> +
> + return 0;
> +}
> +
> +/*
> + * Local variables:
> + * mode: C
> + * c-file-style: "BSD"
> + * c-basic-offset: 4
> + * tab-width: 4
> + * indent-tabs-mode: nil
> + * End:
> + */
> diff --git a/xen/arch/arm/pci/pci-host-common.c
> b/xen/arch/arm/pci/pci-host-common.c
> new file mode 100644
> index 0000000000..a08e06cea1
> --- /dev/null
> +++ b/xen/arch/arm/pci/pci-host-common.c
> @@ -0,0 +1,247 @@
> +/*
> + * Based on Linux drivers/pci/ecam.c
> + * Based on Linux drivers/pci/controller/pci-host-common.c
> + * Based on Linux drivers/pci/controller/pci-host-generic.c
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <xen/init.h>
> +#include <xen/pci.h>
> +#include <xen/rwlock.h>
> +#include <xen/sched.h>
> +#include <xen/vmap.h>
> +
> +/*
> + * List for all the pci host bridges.
> + */
> +
> +static LIST_HEAD(pci_host_bridges);
> +
> +static atomic_t domain_nr = ATOMIC_INIT(-1);
> +
> +static inline void __iomem *pci_remap_cfgspace(paddr_t start, size_t len)
> +{
> + return ioremap_nocache(start, len);
> +}
> +
> +static void pci_ecam_free(struct pci_config_window *cfg)
> +{
> + if ( cfg->win )
> + iounmap(cfg->win);
> +
> + xfree(cfg);
> +}
> +
> +static struct pci_config_window * __init
> +gen_pci_init(struct dt_device_node *dev, const struct pci_ecam_ops *ops)
> +{
> + int err, cfg_reg_idx;
> + u32 bus_range[2];
> + paddr_t addr, size;
> + struct pci_config_window *cfg;
> +
> + cfg = xzalloc(struct pci_config_window);
> + if ( !cfg )
> + return NULL;
> +
> + err = dt_property_read_u32_array(dev, "bus-range", bus_range,
> + ARRAY_SIZE(bus_range));
> + if ( err ) {
> + cfg->busn_start = 0;
> + cfg->busn_end = 0xff;
> + printk(XENLOG_INFO "%s: No bus range found for pci controller\n",
> + dt_node_full_name(dev));
> + } else {
> + cfg->busn_start = bus_range[0];
> + cfg->busn_end = bus_range[1];
> + if ( cfg->busn_end > cfg->busn_start + 0xff )
> + cfg->busn_end = cfg->busn_start + 0xff;
> + }
> +
> + if ( ops->cfg_reg_index )
> + {
> + cfg_reg_idx = ops->cfg_reg_index(dev);
> + if ( cfg_reg_idx < 0 )
> + goto err_exit;
> + }
> + else
> + cfg_reg_idx = 0;
> +
> + /* Parse our PCI ecam register address */
> + err = dt_device_get_address(dev, cfg_reg_idx, &addr, &size);
> + if ( err )
> + goto err_exit;
> +
> + cfg->phys_addr = addr;
> + cfg->size = size;
> +
> + /*
> + * On 64-bit systems, we do a single ioremap for the whole config space
> + * since we have enough virtual address range available. On 32-bit, we
> + * ioremap the config space for each bus individually.
> + * As of now only 64-bit is supported 32-bit is not supported.
> + *
> + * TODO: For 32-bit implement the ioremap/iounmap of config space
> + * dynamically for each read/write call.
> + */
> + cfg->win = pci_remap_cfgspace(cfg->phys_addr, cfg->size);
> + if ( !cfg->win )
> + {
> + printk(XENLOG_ERR "ECAM ioremap failed\n");
> + goto err_exit;
> + }
> + printk("ECAM at [mem 0x%"PRIpaddr"-0x%"PRIpaddr"] for [bus %x-%x] \n",
> + cfg->phys_addr, cfg->phys_addr + cfg->size - 1,
> + cfg->busn_start, cfg->busn_end);
> +
> + if ( ops->init )
> + {
> + err = ops->init(cfg);
> + if ( err )
> + goto err_exit;
> + }
> +
> + return cfg;
> +
> +err_exit:
> + pci_ecam_free(cfg);
> +
> + return NULL;
> +}
> +
> +struct pci_host_bridge *pci_alloc_host_bridge(void)
> +{
> + struct pci_host_bridge *bridge = xzalloc(struct pci_host_bridge);
> +
> + if ( !bridge )
> + return NULL;
> +
> + INIT_LIST_HEAD(&bridge->node);
> +
> + return bridge;
> +}
> +
> +void pci_add_host_bridge(struct pci_host_bridge *bridge)
> +{
> + list_add_tail(&bridge->node, &pci_host_bridges);
> +}
> +
> +static int pci_get_new_domain_nr(void)
> +{
> + return atomic_inc_return(&domain_nr);
> +}
> +
> +static int pci_bus_find_domain_nr(struct dt_device_node *dev)
> +{
> + static int use_dt_domains = -1;
> + int domain;
> +
> + domain = dt_get_pci_domain_nr(dev);
> +
> + /*
> + * Check DT domain and use_dt_domains values.
> + *
> + * If DT domain property is valid (domain >= 0) and
> + * use_dt_domains != 0, the DT assignment is valid since this means
> + * we have not previously allocated a domain number by using
> + * pci_get_new_domain_nr(); we should also update use_dt_domains to
> + * 1, to indicate that we have just assigned a domain number from
> + * DT.
> + *
> + * If DT domain property value is not valid (ie domain < 0), and we
> + * have not previously assigned a domain number from DT
> + * (use_dt_domains != 1) we should assign a domain number by
> + * using the:
> + *
> + * pci_get_new_domain_nr()
> + *
> + * API and update the use_dt_domains value to keep track of method we
> + * are using to assign domain numbers (use_dt_domains = 0).
> + *
> + * All other combinations imply we have a platform that is trying
> + * to mix domain numbers obtained from DT and pci_get_new_domain_nr(),
> + * which is a recipe for domain mishandling and it is prevented by
> + * invalidating the domain value (domain = -1) and printing a
> + * corresponding error.
> + */
> + if ( domain >= 0 && use_dt_domains )
> + {
> + use_dt_domains = 1;
> + }
> + else if ( domain < 0 && use_dt_domains != 1 )
> + {
> + use_dt_domains = 0;
> + domain = pci_get_new_domain_nr();
> + }
> + else
> + {
> + domain = -1;
> + }
> +
> + return domain;
> +}
> +
> +int pci_host_common_probe(struct dt_device_node *dev, const void *data)
> +{
> + struct pci_host_bridge *bridge;
> + struct pci_config_window *cfg;
> + struct pci_ecam_ops *ops;
> + int err;
> +
> + if ( dt_device_for_passthrough(dev) )
> + return 0;
> +
> + ops = (struct pci_ecam_ops *) data;
> +
> + bridge = pci_alloc_host_bridge();
> + if ( !bridge )
> + return -ENOMEM;
> +
> + /* Parse and map our Configuration Space windows */
> + cfg = gen_pci_init(dev, ops);
> + if ( !cfg )
> + {
> + err = -ENOMEM;
> + goto err_exit;
> + }
> +
> + bridge->dt_node = dev;
> + bridge->cfg = cfg;
> + bridge->ops = &ops->pci_ops;
> +
> + bridge->segment = pci_bus_find_domain_nr(dev);
> + if ( bridge->segment < 0 )
> + {
> + printk(XENLOG_ERR "Inconsistent \"linux,pci-domain\" property in
> DT\n");
> + BUG();
> + }
> + pci_add_host_bridge(bridge);
> +
> + return 0;
> +
> +err_exit:
> + xfree(bridge);
> +
> + return err;
> +}
> +
> +/*
> + * Local variables:
> + * mode: C
> + * c-file-style: "BSD"
> + * c-basic-offset: 4
> + * tab-width: 4
> + * indent-tabs-mode: nil
> + * End:
> + */
> diff --git a/xen/arch/arm/pci/pci-host-generic.c
> b/xen/arch/arm/pci/pci-host-generic.c
> new file mode 100644
> index 0000000000..5e4f8f28a0
> --- /dev/null
> +++ b/xen/arch/arm/pci/pci-host-generic.c
> @@ -0,0 +1,46 @@
> +/*
> + * Based on Linux drivers/pci/controller/pci-host-common.c
> + * Based on Linux drivers/pci/controller/pci-host-generic.c
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <asm/device.h>
> +#include <xen/pci.h>
> +#include <asm/pci.h>
> +
> +static const struct dt_device_match gen_pci_dt_match[] = {
This could be __initdata
> + { .compatible = "pci-host-ecam-generic" },
> + { },
> +};
> +
> +static int pci_host_generic_probe(struct dt_device_node *dev,
> + const void *data)
and this could be __init
> +{
> + return pci_host_common_probe(dev, &pci_generic_ecam_ops);
> +}
> +
> +DT_DEVICE_START(pci_gen, "PCI HOST GENERIC", DEVICE_PCI)
> +.dt_match = gen_pci_dt_match,
> +.init = pci_host_generic_probe,
> +DT_DEVICE_END
> +
> +/*
> + * Local variables:
> + * mode: C
> + * c-file-style: "BSD"
> + * c-basic-offset: 4
> + * tab-width: 4
> + * indent-tabs-mode: nil
> + * End:
> + */
> diff --git a/xen/include/asm-arm/pci.h b/xen/include/asm-arm/pci.h
> index 0cf849e26f..bb7eda6705 100644
> --- a/xen/include/asm-arm/pci.h
> +++ b/xen/include/asm-arm/pci.h
> @@ -26,6 +26,62 @@ struct arch_pci_dev {
> struct device dev;
> };
>
> +/*
> + * struct to hold the mappings of a config space window. This
> + * is expected to be used as sysdata for PCI controllers that
> + * use ECAM.
> + */
> +struct pci_config_window {
> + paddr_t phys_addr;
> + paddr_t size;
> + uint8_t busn_start;
> + uint8_t busn_end;
> + void __iomem *win;
> +};
> +
> +/*
> + * struct to hold pci host bridge information
> + * for a PCI controller.
> + */
> +struct pci_host_bridge {
> + struct dt_device_node *dt_node; /* Pointer to the associated DT node */
> + struct list_head node; /* Node in list of host bridges */
> + uint16_t segment; /* Segment number */
> + struct pci_config_window* cfg; /* Pointer to the bridge config window
> */
> + struct pci_ops *ops;
> +};
> +
> +struct pci_ops {
> + void __iomem *(*map_bus)(struct pci_host_bridge *bridge, pci_sbdf_t sbdf,
> + uint32_t offset);
> + int (*read)(struct pci_host_bridge *bridge, pci_sbdf_t sbdf,
> + uint32_t reg, uint32_t len, uint32_t *value);
> + int (*write)(struct pci_host_bridge *bridge, pci_sbdf_t sbdf,
> + uint32_t reg, uint32_t len, uint32_t value);
> +};
> +
> +/*
> + * struct to hold pci ops and bus shift of the config window
> + * for a PCI controller.
> + */
> +struct pci_ecam_ops {
> + unsigned int bus_shift;
> + struct pci_ops pci_ops;
> + int (*cfg_reg_index)(struct dt_device_node *dev);
> + int (*init)(struct pci_config_window *);
> +};
> +
> +/* Default ECAM ops */
> +extern const struct pci_ecam_ops pci_generic_ecam_ops;
> +
> +int pci_host_common_probe(struct dt_device_node *dev, const void *data);
> +int pci_generic_config_read(struct pci_host_bridge *bridge, pci_sbdf_t sbdf,
> + uint32_t reg, uint32_t len, uint32_t *value);
> +int pci_generic_config_write(struct pci_host_bridge *bridge, pci_sbdf_t sbdf,
> + uint32_t reg, uint32_t len, uint32_t value);
> +void __iomem *pci_ecam_map_bus(struct pci_host_bridge *bridge,
> + pci_sbdf_t sbdf, uint32_t where);
> +
> static always_inline bool is_pci_passthrough_enabled(void)
> {
> return pci_passthrough_enabled;
> diff --git a/xen/include/xen/pci.h b/xen/include/xen/pci.h
> index 8e3d4d9454..70ac25345c 100644
> --- a/xen/include/xen/pci.h
> +++ b/xen/include/xen/pci.h
> @@ -15,7 +15,6 @@
> #include <xen/pfn.h>
> #include <asm/device.h>
> #include <asm/numa.h>
> -#include <asm/pci.h>
>
> /*
> * The PCI interface treats multi-function devices as independent
> @@ -62,6 +61,8 @@ typedef union {
> };
> } pci_sbdf_t;
>
> +#include <asm/pci.h>
> +
> struct pci_dev_info {
> /*
> * VF's 'is_extfn' field is used to indicate whether its PF is an
> extended
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |