|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [PATCH V6 2/2] libxl/arm: Add handling of extended regions for DomU
On Mon, 11 Oct 2021, Oleksandr Tyshchenko wrote:
> From: Oleksandr Tyshchenko <oleksandr_tyshchenko@xxxxxxxx>
>
> The extended region (safe range) is a region of guest physical
> address space which is unused and could be safely used to create
> grant/foreign mappings instead of wasting real RAM pages from
> the domain memory for establishing these mappings.
>
> The extended regions are chosen at the domain creation time and
> advertised to it via "reg" property under hypervisor node in
> the guest device-tree. As region 0 is reserved for grant table
> space (always present), the indexes for extended regions are 1...N.
> If extended regions could not be allocated for some reason,
> Xen doesn't fail and behaves as usual, so only inserts region 0.
>
> Please note the following limitations:
> - The extended region feature is only supported for 64-bit domain
> currently.
> - The ACPI case is not covered.
>
> ***
>
> The algorithm to choose extended regions for non-direct mapped
> DomU is simpler in comparison with the algorithm for direct mapped
> Dom0. We usually have a lot of unused space above 4GB, and might
> have some unused space below 4GB (depends on guest memory size).
> Try to allocate separate 2MB-aligned extended regions from the first
> (below 4GB) and second (above 4GB) RAM banks taking into the account
> the maximum supported guest physical address space size and the amount
> of memory assigned to the guest. The minimum size of extended region
> the same as for Dom0 (64MB).
>
> Suggested-by: Julien Grall <jgrall@xxxxxxxxxx>
> Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@xxxxxxxx>
Reviewed-by: Stefano Stabellini <sstabellini@xxxxxxxxxx>
> ---
> Changes RFC -> V2:
> - update patch description
> - drop uneeded "extended-region" DT property
> - clear reg array in finalise_ext_region() and add a TODO
>
> Changes V2 -> V3:
> - update patch description, comments in code
> - only pick up regions with size >= 64MB
> - move the region calculation to make_hypervisor_node() and drop
> finalise_ext_region()
> - extend the list of arguments for make_hypervisor_node()
> - do not show warning for 32-bit domain
> - change the region alignment from 1GB to 2MB
> - move EXT_REGION_SIZE to public/arch-arm.h
>
> Changes V3 -> V4:
> - add R-b, A-b and T-b
>
> Changes V4 -> V5:
> - update patch description and comments in code
> - reflect changes done in previous patch to pass gpaddr_bits
> via createdomain domctl (struct xen_arch_domainconfig)
> - drop R-b, A-b and T-b
> - drop limit for maximum extended region size (128GB)
> - try to also allocate region below 4GB, optimize code
> for calculating extended regions
>
> Change V5 -> V6:
> - reflect changes done in previous patch to pass gpaddr_bits
> via getdomaininfo domctl (struct xen_domctl_getdomaininfo)
> - reduce the number of local variables, rework calculations
> ---
> tools/libs/light/libxl_arm.c | 76
> ++++++++++++++++++++++++++++++++++++++++---
> xen/include/public/arch-arm.h | 2 ++
> 2 files changed, 73 insertions(+), 5 deletions(-)
>
> diff --git a/tools/libs/light/libxl_arm.c b/tools/libs/light/libxl_arm.c
> index e3140a6..c0e8415 100644
> --- a/tools/libs/light/libxl_arm.c
> +++ b/tools/libs/light/libxl_arm.c
> @@ -598,9 +598,20 @@ static int make_timer_node(libxl__gc *gc, void *fdt,
> return 0;
> }
>
> +#define ALIGN_UP_TO_2MB(x) (((x) + MB(2) - 1) & (~(MB(2) - 1)))
> +
> static int make_hypervisor_node(libxl__gc *gc, void *fdt,
> - const libxl_version_info *vers)
> + const libxl_version_info *vers,
> + const libxl_domain_build_info *b_info,
> + const struct xc_dom_image *dom)
> {
> + uint64_t region_size[GUEST_RAM_BANKS] = {0},
> region_base[GUEST_RAM_BANKS],
> + bank1end, ramsize;
> + uint32_t regs[(GUEST_ROOT_ADDRESS_CELLS + GUEST_ROOT_SIZE_CELLS) *
> + (GUEST_RAM_BANKS + 1)];
> + be32 *cells = ®s[0];
> + unsigned int i, len, nr_regions = 0;
> + libxl_dominfo info;
> int res;
> gic_interrupt intr;
>
> @@ -615,9 +626,64 @@ static int make_hypervisor_node(libxl__gc *gc, void *fdt,
> "xen,xen");
> if (res) return res;
>
> - /* reg 0 is grant table space */
> - res = fdt_property_regs(gc, fdt, GUEST_ROOT_ADDRESS_CELLS,
> GUEST_ROOT_SIZE_CELLS,
> - 1,GUEST_GNTTAB_BASE, GUEST_GNTTAB_SIZE);
> + if (strcmp(dom->guest_type, "xen-3.0-aarch64")) {
> + LOG(WARN, "The extended regions are only supported for 64-bit guest
> currently");
> + goto out;
> + }
> +
> + res = libxl_domain_info(CTX, &info, dom->guest_domid);
> + if (res) return res;
> +
> + assert(info.gpaddr_bits >= 32 && info.gpaddr_bits <= 48);
> +
> + /*
> + * Try to allocate separate 2MB-aligned extended regions from the first
> + * (below 4GB) and second (above 4GB) RAM banks taking into the account
> + * the maximum supported guest physical address space size and the amount
> + * of memory assigned to the guest.
> + * As the guest memory layout is not populated yet we cannot rely on
> + * dom->rambank_size[], so calculate the actual size of both banks using
> + * "max_memkb" value.
> + */
> + ramsize = b_info->max_memkb * 1024;
> + if (ramsize <= GUEST_RAM0_SIZE) {
> + region_base[0] = GUEST_RAM0_BASE + ALIGN_UP_TO_2MB(ramsize);
> + region_size[0] = GUEST_RAM0_SIZE - ALIGN_UP_TO_2MB(ramsize);
> + region_base[1] = GUEST_RAM1_BASE;
> + } else
> + region_base[1] = GUEST_RAM1_BASE +
> + ALIGN_UP_TO_2MB(ramsize - GUEST_RAM0_SIZE);
> +
> + bank1end = min(1ULL << info.gpaddr_bits, GUEST_RAM1_BASE +
> GUEST_RAM1_SIZE);
> + if (bank1end > region_base[1])
> + region_size[1] = bank1end - region_base[1];
> +
> +out:
> + /*
> + * The region 0 for grant table space must be always present. If we
> managed
> + * to allocate the extended regions then insert them as regions 1...N.
> + */
> + set_range(&cells, GUEST_ROOT_ADDRESS_CELLS, GUEST_ROOT_SIZE_CELLS,
> + GUEST_GNTTAB_BASE, GUEST_GNTTAB_SIZE);
> +
> + for (i = 0; i < GUEST_RAM_BANKS; i++) {
> + if (region_size[i] < GUEST_EXT_REGION_MIN_SIZE)
> + continue;
> +
> + LOG(DEBUG, "Extended region %u: %#"PRIx64"->%#"PRIx64"\n",
> + nr_regions, region_base[i], region_base[i] + region_size[i]);
> +
> + set_range(&cells, GUEST_ROOT_ADDRESS_CELLS, GUEST_ROOT_SIZE_CELLS,
> + region_base[i], region_size[i]);
> + nr_regions++;
> + }
> +
> + if (!nr_regions)
> + LOG(WARN, "The extended regions cannot be allocated, not enough
> space");
> +
> + len = sizeof(regs[0]) * (GUEST_ROOT_ADDRESS_CELLS +
> GUEST_ROOT_SIZE_CELLS) *
> + (nr_regions + 1);
> + res = fdt_property(fdt, "reg", regs, len);
> if (res) return res;
>
> /*
> @@ -963,7 +1029,7 @@ next_resize:
> }
>
> FDT( make_timer_node(gc, fdt, ainfo, state->clock_frequency) );
> - FDT( make_hypervisor_node(gc, fdt, vers) );
> + FDT( make_hypervisor_node(gc, fdt, vers, info, dom) );
>
> if (info->arch_arm.vuart == LIBXL_VUART_TYPE_SBSA_UART)
> FDT( make_vpl011_uart_node(gc, fdt, ainfo, dom) );
> diff --git a/xen/include/public/arch-arm.h b/xen/include/public/arch-arm.h
> index d46c61f..19ca2b0 100644
> --- a/xen/include/public/arch-arm.h
> +++ b/xen/include/public/arch-arm.h
> @@ -451,6 +451,8 @@ typedef uint64_t xen_callback_t;
> #define GUEST_RAM_BANK_BASES { GUEST_RAM0_BASE, GUEST_RAM1_BASE }
> #define GUEST_RAM_BANK_SIZES { GUEST_RAM0_SIZE, GUEST_RAM1_SIZE }
>
> +#define GUEST_EXT_REGION_MIN_SIZE xen_mk_ullong(0x0004000000) /* 64MB */
> +
> /* Current supported guest VCPUs */
> #define GUEST_MAX_VCPUS 128
>
> --
> 2.7.4
>
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |