[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v6 2/3] xen/arm: Enable the existing x86 virtual PCI support for ARM.




On 15.10.2021 10:32, Roger Pau Monné wrote:
> On Thu, Oct 14, 2021 at 03:49:50PM +0100, Bertrand Marquis wrote:
>> From: Rahul Singh <rahul.singh@xxxxxxx>
>>
>> The existing VPCI support available for X86 is adapted for Arm.
>> When the device is added to XEN via the hyper call
>> “PHYSDEVOP_pci_device_add”, VPCI handler for the config space
>> access is added to the Xen to emulate the PCI devices config space.
>>
>> A MMIO trap handler for the PCI ECAM space is registered in XEN
>> so that when guest is trying to access the PCI config space,XEN
>> will trap the access and emulate read/write using the VPCI and
>> not the real PCI hardware.
>>
>> For Dom0less systems scan_pci_devices() would be used to discover the
>> PCI device in XEN and VPCI handler will be added during XEN boots.
>>
>> This patch is also doing some small fixes to fix compilation errors on
>> arm32 of vpci:
>> - add a cast to unsigned long in print in header.c
>> - add a cast to uint64_t in vpci_ecam_mmio_write
>>
>> Signed-off-by: Rahul Singh <rahul.singh@xxxxxxx>
>> Signed-off-by: Bertrand Marquis <bertrand.marquis@xxxxxxx>
>> ---
>> Changes in v6:
>> - Use new vpci_ecam_ helpers for PCI access
>> - Do not set XEN_DOMCTL_CDF_vpci for dom0 for now (will be done in a
>> future patch once everything is ready)
> 
> Isn't the series missing a revert of XEN_DOMCTL_CDF_vpci? I think
> that's what we agreed would be the way forward.
> 
The revert patch has already been merged.
https://xenbits.xen.org/gitweb/?p=xen.git;a=commit;h=9516d01ac3015f522528ed6dafb3f584eaa7ed2c
>> - rename REGISTER_OFFSET to ECAM_REG_OFFSET and move it to pci.h
>> - remove not needed local variables in vpci_mmio_write, the one in read
>> has been kept to ensure proper compilation on arm32
>> - move call to vpci_add_handlers before iommu init to simplify exit path
>> - move call to pci_cleanup_msi in the out section of pci_add_device if
>> pdev is not NULL and on error
>> - initialize pdev to NULL to handle properly exit path call of
>> pci_cleanup_msi
>> - keep has_vpci to return false for now as CFG_vpci has been removed.
>> Added a comment on top of the definition.
>> - fix compilation errors on arm32 (print in header.c, cast missing in
>> mmio_write.
>> - local variable was kept in vpci_mmio_read on arm to prevent a cast
>> error in arm32.
>> Change in v5:
>> - Add pci_cleanup_msi(pdev) incleanup part.
>> - Added Reviewed-by: Stefano Stabellini <sstabellini@xxxxxxxxxx>
>> Change in v4:
>> - Move addition of XEN_DOMCTL_CDF_vpci flag to separate patch
>> Change in v3:
>> - Use is_pci_passthrough_enabled() in place of pci_passthrough_enabled 
>> variable
>> - Reject XEN_DOMCTL_CDF_vpci for x86 in arch_sanitise_domain_config()
>> - Remove IS_ENABLED(CONFIG_HAS_VPCI) from has_vpci()
>> Change in v2:
>> - Add new XEN_DOMCTL_CDF_vpci flag
>> - modify has_vpci() to include XEN_DOMCTL_CDF_vpci
>> - enable vpci support when pci-passthough option is enabled.
>> ---
>> ---
>>  xen/arch/arm/Makefile         |  1 +
>>  xen/arch/arm/domain.c         |  4 ++
>>  xen/arch/arm/vpci.c           | 74 +++++++++++++++++++++++++++++++++++
>>  xen/arch/arm/vpci.h           | 36 +++++++++++++++++
>>  xen/drivers/passthrough/pci.c | 18 ++++++++-
>>  xen/drivers/vpci/header.c     |  3 +-
>>  xen/drivers/vpci/vpci.c       |  2 +-
>>  xen/include/asm-arm/domain.h  |  1 +
>>  xen/include/asm-x86/pci.h     |  2 -
>>  xen/include/public/arch-arm.h |  7 ++++
>>  xen/include/xen/pci.h         |  3 ++
>>  11 files changed, 146 insertions(+), 5 deletions(-)
>>  create mode 100644 xen/arch/arm/vpci.c
>>  create mode 100644 xen/arch/arm/vpci.h
>>
>> diff --git a/xen/arch/arm/Makefile b/xen/arch/arm/Makefile
>> index 64518848b2..07f634508e 100644
>> --- a/xen/arch/arm/Makefile
>> +++ b/xen/arch/arm/Makefile
>> @@ -7,6 +7,7 @@ ifneq ($(CONFIG_NO_PLAT),y)
>>  obj-y += platforms/
>>  endif
>>  obj-$(CONFIG_TEE) += tee/
>> +obj-$(CONFIG_HAS_VPCI) += vpci.o
>>  
>>  obj-$(CONFIG_HAS_ALTERNATIVE) += alternative.o
>>  obj-y += bootfdt.init.o
>> diff --git a/xen/arch/arm/domain.c b/xen/arch/arm/domain.c
>> index eef0661beb..96e1b23550 100644
>> --- a/xen/arch/arm/domain.c
>> +++ b/xen/arch/arm/domain.c
>> @@ -39,6 +39,7 @@
>>  #include <asm/vgic.h>
>>  #include <asm/vtimer.h>
>>  
>> +#include "vpci.h"
>>  #include "vuart.h"
>>  
>>  DEFINE_PER_CPU(struct vcpu *, curr_vcpu);
>> @@ -773,6 +774,9 @@ int arch_domain_create(struct domain *d,
>>      if ( is_hardware_domain(d) && (rc = domain_vuart_init(d)) )
>>          goto fail;
>>  
>> +    if ( (rc = domain_vpci_init(d)) != 0 )
>> +        goto fail;
>> +
>>      return 0;
>>  
>>  fail:
>> diff --git a/xen/arch/arm/vpci.c b/xen/arch/arm/vpci.c
>> new file mode 100644
>> index 0000000000..7c3552b65d
>> --- /dev/null
>> +++ b/xen/arch/arm/vpci.c
>> @@ -0,0 +1,74 @@
>> +/*
>> + * xen/arch/arm/vpci.c
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +#include <xen/sched.h>
>> +#include <xen/vpci.h>
>> +
>> +#include <asm/mmio.h>
>> +
>> +static int vpci_mmio_read(struct vcpu *v, mmio_info_t *info,
>> +                          register_t *r, void *p)
>> +{
>> +    pci_sbdf_t sbdf;
>> +    /* data is needed to prevent a pointer cast on 32bit */
>> +    unsigned long data = ~0ul;
>> +    int ret;
>> +
>> +    /* We ignore segment part and always handle segment 0 */
>> +    sbdf.sbdf = ECAM_BDF(info->gpa);
>> +
>> +    ret = vpci_ecam_mmio_read(sbdf, ECAM_REG_OFFSET(info->gpa),
>> +                              1U << info->dabt.size, &data);
>> +
>> +    *r = data;
>> +
>> +    return ret;
>> +}
>> +
>> +static int vpci_mmio_write(struct vcpu *v, mmio_info_t *info,
>> +                           register_t r, void *p)
>> +{
>> +    pci_sbdf_t sbdf;
>> +
>> +    /* We ignore segment part and always handle segment 0 */
>> +    sbdf.sbdf = ECAM_BDF(info->gpa);
>> +
>> +    return vpci_ecam_mmio_write(sbdf, ECAM_REG_OFFSET(info->gpa),
>> +                                1U << info->dabt.size, r);
>> +}
> 
> I'm not sure returning an error value here is helpful, as I'm not sure
> how native Arm behaves and how this error is propagated into the
> guest. FWIWreturning ~0 or dropping writes is what we do in x86 when
> vPCI is not capable of handling the access.
> 
>> +
>> +static const struct mmio_handler_ops vpci_mmio_handler = {
>> +    .read  = vpci_mmio_read,
>> +    .write = vpci_mmio_write,
>> +};
>> +
>> +int domain_vpci_init(struct domain *d)
>> +{
>> +    if ( !has_vpci(d) )
>> +        return 0;
>> +
>> +    register_mmio_handler(d, &vpci_mmio_handler,
>> +                          GUEST_VPCI_ECAM_BASE, GUEST_VPCI_ECAM_SIZE, NULL);
>> +
>> +    return 0;
>> +}
>> +
>> +/*
>> + * Local variables:
>> + * mode: C
>> + * c-file-style: "BSD"
>> + * c-basic-offset: 4
>> + * indent-tabs-mode: nil
>> + * End:
>> + */
>> +
>> diff --git a/xen/arch/arm/vpci.h b/xen/arch/arm/vpci.h
>> new file mode 100644
>> index 0000000000..d8a7b0e3e8
>> --- /dev/null
>> +++ b/xen/arch/arm/vpci.h
>> @@ -0,0 +1,36 @@
>> +/*
>> + * xen/arch/arm/vpci.h
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#ifndef __ARCH_ARM_VPCI_H__
>> +#define __ARCH_ARM_VPCI_H__
>> +
>> +#ifdef CONFIG_HAS_VPCI
>> +int domain_vpci_init(struct domain *d);
>> +#else
>> +static inline int domain_vpci_init(struct domain *d)
>> +{
>> +    return 0;
>> +}
>> +#endif
>> +
>> +#endif /* __ARCH_ARM_VPCI_H__ */
>> +
>> +/*
>> + * Local variables:
>> + * mode: C
>> + * c-file-style: "BSD"
>> + * c-basic-offset: 4
>> + * indent-tabs-mode: nil
>> + * End:
>> + */
>> diff --git a/xen/drivers/passthrough/pci.c b/xen/drivers/passthrough/pci.c
>> index 3aa8c3175f..8cc529ecec 100644
>> --- a/xen/drivers/passthrough/pci.c
>> +++ b/xen/drivers/passthrough/pci.c
>> @@ -658,7 +658,7 @@ int pci_add_device(u16 seg, u8 bus, u8 devfn,
>>                     const struct pci_dev_info *info, nodeid_t node)
>>  {
>>      struct pci_seg *pseg;
>> -    struct pci_dev *pdev;
>> +    struct pci_dev *pdev = NULL;
>>      unsigned int slot = PCI_SLOT(devfn), func = PCI_FUNC(devfn);
>>      const char *pdev_type;
>>      int ret;
>> @@ -752,6 +752,19 @@ int pci_add_device(u16 seg, u8 bus, u8 devfn,
>>  
>>      check_pdev(pdev);
>>  
>> +#ifdef CONFIG_ARM
>> +    /*
>> +     * On ARM PCI devices discovery will be done by Dom0. Add vpci handler 
>> when
>> +     * Dom0 inform XEN to add the PCI devices in XEN.
>> +     */
>> +    ret = vpci_add_handlers(pdev);
>> +    if ( ret )
>> +    {
>> +        printk(XENLOG_ERR "Setup of vPCI failed: %d\n", ret);
>> +        goto out;
>> +    }
>> +#endif
> 
> I think vpci_add_handlers should be called after checking that
> pdev->domain is != NULL, so I would move this chunk a bit below.
> 
>> +
>>      ret = 0;
>>      if ( !pdev->domain )
>>      {
>> @@ -784,6 +797,9 @@ out:
>>                     &PCI_SBDF(seg, bus, slot, func));
>>          }
>>      }
>> +    else if ( pdev )
>> +        pci_cleanup_msi(pdev);
> 
> I'm slightly lost at why you add this chunk, is this strictly related
> to the patch?
> 
>>      return ret;
>>  }
>>  
>> diff --git a/xen/drivers/vpci/header.c b/xen/drivers/vpci/header.c
>> index f8cd55e7c0..c5b025b88b 100644
>> --- a/xen/drivers/vpci/header.c
>> +++ b/xen/drivers/vpci/header.c
>> @@ -374,7 +374,8 @@ static void bar_write(const struct pci_dev *pdev, 
>> unsigned int reg,
>>          if ( val != (uint32_t)(bar->addr >> (hi ? 32 : 0)) )
>>              gprintk(XENLOG_WARNING,
>>                      "%pp: ignored BAR %lu write with memory decoding 
>> enabled\n",
>> -                    &pdev->sbdf, bar - pdev->vpci->header.bars + hi);
>> +                    &pdev->sbdf,
>> +                    (unsigned long)(bar - pdev->vpci->header.bars + hi));
>>          return;
>>      }
>>  
>> diff --git a/xen/drivers/vpci/vpci.c b/xen/drivers/vpci/vpci.c
>> index c0853176d7..2bd67fc27a 100644
>> --- a/xen/drivers/vpci/vpci.c
>> +++ b/xen/drivers/vpci/vpci.c
>> @@ -507,7 +507,7 @@ int vpci_ecam_mmio_write(pci_sbdf_t sbdf, unsigned int 
>> reg, unsigned int len,
>>  
>>      vpci_write(sbdf, reg, min(4u, len), data);
>>      if ( len == 8 )
>> -        vpci_write(sbdf, reg + 4, 4, data >> 32);
>> +        vpci_write(sbdf, reg + 4, 4, (uint64_t)data >> 32);
>>  
>>      return 1;
>>  }
>> diff --git a/xen/include/asm-arm/domain.h b/xen/include/asm-arm/domain.h
>> index 14e575288f..9b3647587a 100644
>> --- a/xen/include/asm-arm/domain.h
>> +++ b/xen/include/asm-arm/domain.h
>> @@ -263,6 +263,7 @@ static inline void arch_vcpu_block(struct vcpu *v) {}
>>  
>>  #define arch_vm_assist_valid_mask(d) (1UL << 
>> VMASST_TYPE_runstate_update_flag)
>>  
>> +/* vPCI is not available on Arm */
>>  #define has_vpci(d)    ({ (void)(d); false; })
>>  
>>  #endif /* __ASM_DOMAIN_H__ */
>> diff --git a/xen/include/asm-x86/pci.h b/xen/include/asm-x86/pci.h
>> index a0df5c1279..443f25347d 100644
>> --- a/xen/include/asm-x86/pci.h
>> +++ b/xen/include/asm-x86/pci.h
>> @@ -6,8 +6,6 @@
>>  #define CF8_ADDR_HI(cf8) (  ((cf8) & 0x0f000000) >> 16)
>>  #define CF8_ENABLED(cf8) (!!((cf8) & 0x80000000))
>>  
>> -#define ECAM_BDF(addr)   ( ((addr) & 0x0ffff000) >> 12)
>> -
>>  #define IS_SNB_GFX(id) (id == 0x01068086 || id == 0x01168086 \
>>                          || id == 0x01268086 || id == 0x01028086 \
>>                          || id == 0x01128086 || id == 0x01228086 \
>> diff --git a/xen/include/public/arch-arm.h b/xen/include/public/arch-arm.h
>> index d46c61fca9..44be337dec 100644
>> --- a/xen/include/public/arch-arm.h
>> +++ b/xen/include/public/arch-arm.h
>> @@ -418,6 +418,13 @@ typedef uint64_t xen_callback_t;
>>  #define GUEST_GICV3_GICR0_BASE     xen_mk_ullong(0x03020000) /* vCPU0..127 
>> */
>>  #define GUEST_GICV3_GICR0_SIZE     xen_mk_ullong(0x01000000)
>>  
>> +/*
>> + * 256 MB is reserved for VPCI configuration space based on calculation
>> + * 256 buses × 32 devices × 8 functions × 4 KB = 256 MB
>> + */
>> +#define GUEST_VPCI_ECAM_BASE    xen_mk_ullong(0x10000000)
>> +#define GUEST_VPCI_ECAM_SIZE    xen_mk_ullong(0x10000000)
>> +
>>  /* ACPI tables physical address */
>>  #define GUEST_ACPI_BASE xen_mk_ullong(0x20000000)
>>  #define GUEST_ACPI_SIZE xen_mk_ullong(0x02000000)
>> diff --git a/xen/include/xen/pci.h b/xen/include/xen/pci.h
>> index 70ac25345c..db18cb7639 100644
>> --- a/xen/include/xen/pci.h
>> +++ b/xen/include/xen/pci.h
>> @@ -40,6 +40,9 @@
>>  #define PCI_SBDF3(s,b,df) \
>>      ((pci_sbdf_t){ .sbdf = (((s) & 0xffff) << 16) | PCI_BDF2(b, df) })
>>  
>> +#define ECAM_BDF(addr)         ( ((addr) & 0x0ffff000) >> 12)
>                                    ^ extra space?
> 
> Thanks, Roger.
> 



 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.