Re: [PATCH v6 2/3] xen/arm: Enable the existing x86 virtual PCI support for ARM.

[Bertrand Marquis <Bertrand.Marquis@xxxxxxx>]

Hi Stefano,

> On 15 Oct 2021, at 00:49, Stefano Stabellini <sstabellini@xxxxxxxxxx> wrote:
> 
> On Thu, 14 Oct 2021, Bertrand Marquis wrote:
>> From: Rahul Singh <rahul.singh@xxxxxxx>
>> 
>> The existing VPCI support available for X86 is adapted for Arm.
>> When the device is added to XEN via the hyper call
>> “PHYSDEVOP_pci_device_add”, VPCI handler for the config space
>> access is added to the Xen to emulate the PCI devices config space.
>> 
>> A MMIO trap handler for the PCI ECAM space is registered in XEN
>> so that when guest is trying to access the PCI config space,XEN
>> will trap the access and emulate read/write using the VPCI and
>> not the real PCI hardware.
>> 
>> For Dom0less systems scan_pci_devices() would be used to discover the
>> PCI device in XEN and VPCI handler will be added during XEN boots.
>> 
>> This patch is also doing some small fixes to fix compilation errors on
>> arm32 of vpci:
>> - add a cast to unsigned long in print in header.c
>> - add a cast to uint64_t in vpci_ecam_mmio_write
> 
> Thank you for these! Strictly speaking they are not required now but
> they are welcome. I would also be OK if they were removed from this
> patch but it is fine to have them in here.
> 
> There is an issues with this patch, see below at the bottom
> 
> 
>> Signed-off-by: Rahul Singh <rahul.singh@xxxxxxx>
>> Signed-off-by: Bertrand Marquis <bertrand.marquis@xxxxxxx>
>> 
>> ---
>> Changes in v6:
>> - Use new vpci_ecam_ helpers for PCI access
>> - Do not set XEN_DOMCTL_CDF_vpci for dom0 for now (will be done in a
>> future patch once everything is ready)
>> - rename REGISTER_OFFSET to ECAM_REG_OFFSET and move it to pci.h
>> - remove not needed local variables in vpci_mmio_write, the one in read
>> has been kept to ensure proper compilation on arm32
>> - move call to vpci_add_handlers before iommu init to simplify exit path
>> - move call to pci_cleanup_msi in the out section of pci_add_device if
>> pdev is not NULL and on error
>> - initialize pdev to NULL to handle properly exit path call of
>> pci_cleanup_msi
>> - keep has_vpci to return false for now as CFG_vpci has been removed.
>> Added a comment on top of the definition.
>> - fix compilation errors on arm32 (print in header.c, cast missing in
>> mmio_write.
>> - local variable was kept in vpci_mmio_read on arm to prevent a cast
>> error in arm32.
>> Change in v5:
>> - Add pci_cleanup_msi(pdev) incleanup part.
>> - Added Reviewed-by: Stefano Stabellini <sstabellini@xxxxxxxxxx>
>> Change in v4:
>> - Move addition of XEN_DOMCTL_CDF_vpci flag to separate patch
>> Change in v3:
>> - Use is_pci_passthrough_enabled() in place of pci_passthrough_enabled 
>> variable
>> - Reject XEN_DOMCTL_CDF_vpci for x86 in arch_sanitise_domain_config()
>> - Remove IS_ENABLED(CONFIG_HAS_VPCI) from has_vpci()
>> Change in v2:
>> - Add new XEN_DOMCTL_CDF_vpci flag
>> - modify has_vpci() to include XEN_DOMCTL_CDF_vpci
>> - enable vpci support when pci-passthough option is enabled.
>> ---
>> ---
>> xen/arch/arm/Makefile         |  1 +
>> xen/arch/arm/domain.c         |  4 ++
>> xen/arch/arm/vpci.c           | 74 +++++++++++++++++++++++++++++++++++
>> xen/arch/arm/vpci.h           | 36 +++++++++++++++++
>> xen/drivers/passthrough/pci.c | 18 ++++++++-
>> xen/drivers/vpci/header.c     |  3 +-
>> xen/drivers/vpci/vpci.c       |  2 +-
>> xen/include/asm-arm/domain.h  |  1 +
>> xen/include/asm-x86/pci.h     |  2 -
>> xen/include/public/arch-arm.h |  7 ++++
>> xen/include/xen/pci.h         |  3 ++
>> 11 files changed, 146 insertions(+), 5 deletions(-)
>> create mode 100644 xen/arch/arm/vpci.c
>> create mode 100644 xen/arch/arm/vpci.h
>> 
>> diff --git a/xen/arch/arm/Makefile b/xen/arch/arm/Makefile
>> index 64518848b2..07f634508e 100644
>> --- a/xen/arch/arm/Makefile
>> +++ b/xen/arch/arm/Makefile
>> @@ -7,6 +7,7 @@ ifneq ($(CONFIG_NO_PLAT),y)
>> obj-y += platforms/
>> endif
>> obj-$(CONFIG_TEE) += tee/
>> +obj-$(CONFIG_HAS_VPCI) += vpci.o
>> 
>> obj-$(CONFIG_HAS_ALTERNATIVE) += alternative.o
>> obj-y += bootfdt.init.o
>> diff --git a/xen/arch/arm/domain.c b/xen/arch/arm/domain.c
>> index eef0661beb..96e1b23550 100644
>> --- a/xen/arch/arm/domain.c
>> +++ b/xen/arch/arm/domain.c
>> @@ -39,6 +39,7 @@
>> #include <asm/vgic.h>
>> #include <asm/vtimer.h>
>> 
>> +#include "vpci.h"
>> #include "vuart.h"
>> 
>> DEFINE_PER_CPU(struct vcpu *, curr_vcpu);
>> @@ -773,6 +774,9 @@ int arch_domain_create(struct domain *d,
>>     if ( is_hardware_domain(d) && (rc = domain_vuart_init(d)) )
>>         goto fail;
>> 
>> +    if ( (rc = domain_vpci_init(d)) != 0 )
>> +        goto fail;
>> +
>>     return 0;
>> 
>> fail:
>> diff --git a/xen/arch/arm/vpci.c b/xen/arch/arm/vpci.c
>> new file mode 100644
>> index 0000000000..7c3552b65d
>> --- /dev/null
>> +++ b/xen/arch/arm/vpci.c
>> @@ -0,0 +1,74 @@
>> +/*
>> + * xen/arch/arm/vpci.c
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +#include <xen/sched.h>
>> +#include <xen/vpci.h>
>> +
>> +#include <asm/mmio.h>
>> +
>> +static int vpci_mmio_read(struct vcpu *v, mmio_info_t *info,
>> +                          register_t *r, void *p)
>> +{
>> +    pci_sbdf_t sbdf;
>> +    /* data is needed to prevent a pointer cast on 32bit */
>> +    unsigned long data = ~0ul;
>> +    int ret;
>> +
>> +    /* We ignore segment part and always handle segment 0 */
>> +    sbdf.sbdf = ECAM_BDF(info->gpa);
>> +
>> +    ret = vpci_ecam_mmio_read(sbdf, ECAM_REG_OFFSET(info->gpa),
>> +                              1U << info->dabt.size, &data);
>> +
>> +    *r = data;
>> +
>> +    return ret;
>> +}
>> +
>> +static int vpci_mmio_write(struct vcpu *v, mmio_info_t *info,
>> +                           register_t r, void *p)
>> +{
>> +    pci_sbdf_t sbdf;
>> +
>> +    /* We ignore segment part and always handle segment 0 */
>> +    sbdf.sbdf = ECAM_BDF(info->gpa);
>> +
>> +    return vpci_ecam_mmio_write(sbdf, ECAM_REG_OFFSET(info->gpa),
>> +                                1U << info->dabt.size, r);
>> +}
>> +
>> +static const struct mmio_handler_ops vpci_mmio_handler = {
>> +    .read  = vpci_mmio_read,
>> +    .write = vpci_mmio_write,
>> +};
>> +
>> +int domain_vpci_init(struct domain *d)
>> +{
>> +    if ( !has_vpci(d) )
>> +        return 0;
>> +
>> +    register_mmio_handler(d, &vpci_mmio_handler,
>> +                          GUEST_VPCI_ECAM_BASE, GUEST_VPCI_ECAM_SIZE, NULL);
>> +
>> +    return 0;
>> +}
>> +
>> +/*
>> + * Local variables:
>> + * mode: C
>> + * c-file-style: "BSD"
>> + * c-basic-offset: 4
>> + * indent-tabs-mode: nil
>> + * End:
>> + */
>> +
>> diff --git a/xen/arch/arm/vpci.h b/xen/arch/arm/vpci.h
>> new file mode 100644
>> index 0000000000..d8a7b0e3e8
>> --- /dev/null
>> +++ b/xen/arch/arm/vpci.h
>> @@ -0,0 +1,36 @@
>> +/*
>> + * xen/arch/arm/vpci.h
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#ifndef __ARCH_ARM_VPCI_H__
>> +#define __ARCH_ARM_VPCI_H__
>> +
>> +#ifdef CONFIG_HAS_VPCI
>> +int domain_vpci_init(struct domain *d);
>> +#else
>> +static inline int domain_vpci_init(struct domain *d)
>> +{
>> +    return 0;
>> +}
>> +#endif
>> +
>> +#endif /* __ARCH_ARM_VPCI_H__ */
>> +
>> +/*
>> + * Local variables:
>> + * mode: C
>> + * c-file-style: "BSD"
>> + * c-basic-offset: 4
>> + * indent-tabs-mode: nil
>> + * End:
>> + */
>> diff --git a/xen/drivers/passthrough/pci.c b/xen/drivers/passthrough/pci.c
>> index 3aa8c3175f..8cc529ecec 100644
>> --- a/xen/drivers/passthrough/pci.c
>> +++ b/xen/drivers/passthrough/pci.c
>> @@ -658,7 +658,7 @@ int pci_add_device(u16 seg, u8 bus, u8 devfn,
>>                    const struct pci_dev_info *info, nodeid_t node)
>> {
>>     struct pci_seg *pseg;
>> -    struct pci_dev *pdev;
>> +    struct pci_dev *pdev = NULL;
>>     unsigned int slot = PCI_SLOT(devfn), func = PCI_FUNC(devfn);
>>     const char *pdev_type;
>>     int ret;
>> @@ -752,6 +752,19 @@ int pci_add_device(u16 seg, u8 bus, u8 devfn,
>> 
>>     check_pdev(pdev);
>> 
>> +#ifdef CONFIG_ARM
>> +    /*
>> +     * On ARM PCI devices discovery will be done by Dom0. Add vpci handler 
>> when
>> +     * Dom0 inform XEN to add the PCI devices in XEN.
>> +     */
>> +    ret = vpci_add_handlers(pdev);
>> +    if ( ret )
>> +    {
>> +        printk(XENLOG_ERR "Setup of vPCI failed: %d\n", ret);
>> +        goto out;
>> +    }
>> +#endif
>> +
>>     ret = 0;
>>     if ( !pdev->domain )
>>     {
>> @@ -784,6 +797,9 @@ out:
>>                    &PCI_SBDF(seg, bus, slot, func));
>>         }
>>     }
>> +    else if ( pdev )
>> +        pci_cleanup_msi(pdev);
>> +
>>     return ret;
>> }
>> 
>> diff --git a/xen/drivers/vpci/header.c b/xen/drivers/vpci/header.c
>> index f8cd55e7c0..c5b025b88b 100644
>> --- a/xen/drivers/vpci/header.c
>> +++ b/xen/drivers/vpci/header.c
>> @@ -374,7 +374,8 @@ static void bar_write(const struct pci_dev *pdev, 
>> unsigned int reg,
>>         if ( val != (uint32_t)(bar->addr >> (hi ? 32 : 0)) )
>>             gprintk(XENLOG_WARNING,
>>                     "%pp: ignored BAR %lu write with memory decoding 
>> enabled\n",
>> -                    &pdev->sbdf, bar - pdev->vpci->header.bars + hi);
>> +                    &pdev->sbdf,
>> +                    (unsigned long)(bar - pdev->vpci->header.bars + hi));
>>         return;
>>     }
>> 
>> diff --git a/xen/drivers/vpci/vpci.c b/xen/drivers/vpci/vpci.c
>> index c0853176d7..2bd67fc27a 100644
>> --- a/xen/drivers/vpci/vpci.c
>> +++ b/xen/drivers/vpci/vpci.c
>> @@ -507,7 +507,7 @@ int vpci_ecam_mmio_write(pci_sbdf_t sbdf, unsigned int 
>> reg, unsigned int len,
>> 
>>     vpci_write(sbdf, reg, min(4u, len), data);
>>     if ( len == 8 )
>> -        vpci_write(sbdf, reg + 4, 4, data >> 32);
>> +        vpci_write(sbdf, reg + 4, 4, (uint64_t)data >> 32);
>> 
>>     return 1;
>> }
>> diff --git a/xen/include/asm-arm/domain.h b/xen/include/asm-arm/domain.h
>> index 14e575288f..9b3647587a 100644
>> --- a/xen/include/asm-arm/domain.h
>> +++ b/xen/include/asm-arm/domain.h
>> @@ -263,6 +263,7 @@ static inline void arch_vcpu_block(struct vcpu *v) {}
>> 
>> #define arch_vm_assist_valid_mask(d) (1UL << 
>> VMASST_TYPE_runstate_update_flag)
>> 
>> +/* vPCI is not available on Arm */
>> #define has_vpci(d)    ({ (void)(d); false; })
>> 
>> #endif /* __ASM_DOMAIN_H__ */
>> diff --git a/xen/include/asm-x86/pci.h b/xen/include/asm-x86/pci.h
>> index a0df5c1279..443f25347d 100644
>> --- a/xen/include/asm-x86/pci.h
>> +++ b/xen/include/asm-x86/pci.h
>> @@ -6,8 +6,6 @@
>> #define CF8_ADDR_HI(cf8) (  ((cf8) & 0x0f000000) >> 16)
>> #define CF8_ENABLED(cf8) (!!((cf8) & 0x80000000))
>> 
>> -#define ECAM_BDF(addr)   ( ((addr) & 0x0ffff000) >> 12)
>> -
>> #define IS_SNB_GFX(id) (id == 0x01068086 || id == 0x01168086 \
>>                         || id == 0x01268086 || id == 0x01028086 \
>>                         || id == 0x01128086 || id == 0x01228086 \
>> diff --git a/xen/include/public/arch-arm.h b/xen/include/public/arch-arm.h
>> index d46c61fca9..44be337dec 100644
>> --- a/xen/include/public/arch-arm.h
>> +++ b/xen/include/public/arch-arm.h
>> @@ -418,6 +418,13 @@ typedef uint64_t xen_callback_t;
>> #define GUEST_GICV3_GICR0_BASE     xen_mk_ullong(0x03020000) /* vCPU0..127 */
>> #define GUEST_GICV3_GICR0_SIZE     xen_mk_ullong(0x01000000)
>> 
>> +/*
>> + * 256 MB is reserved for VPCI configuration space based on calculation
>> + * 256 buses × 32 devices × 8 functions × 4 KB = 256 MB
>> + */
> 
> Somehow 3 non-ascii characters sneaked into this patch. The 'x' are not
> 'x' but are 0xc3 and cause the following errors in a few gitlab-ci
> builds:
> 
> python3 mkheader.py arm32 arm32.h.tmp 
> /builds/xen-project/people/sstabellini/xen/tools/include/xen-foreign/../../../xen/include/public/arch-arm.h
>  
> /builds/xen-project/people/sstabellini/xen/tools/include/xen-foreign/../../../xen/include/public/xen.h
> Traceback (most recent call last):
>  File "mkheader.py", line 120, in <module>
>    input += f.read();
>  File "/usr/lib/python3.5/encodings/ascii.py", line 26, in decode
>    return codecs.ascii_decode(input, self.errors)[0]
> UnicodeDecodeError: 'ascii' codec can't decode byte 0xc3 in position 14641: 
> ordinal not in range(128)
> Makefile:28: recipe for target 'arm32.h' failed
> make[2]: *** [arm32.h] Error 1
> 
> Full logs here:
> https://gitlab.com/xen-project/people/sstabellini/xen/-/pipelines/38855078
> https://gitlab.com/xen-project/people/sstabellini/xen/-/jobs/16810108756
> 
> 
> Replacing the 3 characters with 'x' solves the problem.
> https://gitlab.com/xen-project/people/sstabellini/xen/-/pipelines/388721262
> 
> 
> With the three 'x' changed to ascii:
> 
> Reviewed-by: Stefano Stabellini <sstabellini@xxxxxxxxxx>

I will fix that but sadly seeing all other changes to be done I do not think I 
can keep your R-b.

Thanks
Bertrand

> 
> 
> 
>> +#define GUEST_VPCI_ECAM_BASE    xen_mk_ullong(0x10000000)
>> +#define GUEST_VPCI_ECAM_SIZE    xen_mk_ullong(0x10000000)
>> +
>> /* ACPI tables physical address */
>> #define GUEST_ACPI_BASE xen_mk_ullong(0x20000000)
>> #define GUEST_ACPI_SIZE xen_mk_ullong(0x02000000)
>> diff --git a/xen/include/xen/pci.h b/xen/include/xen/pci.h
>> index 70ac25345c..db18cb7639 100644
>> --- a/xen/include/xen/pci.h
>> +++ b/xen/include/xen/pci.h
>> @@ -40,6 +40,9 @@
>> #define PCI_SBDF3(s,b,df) \
>>     ((pci_sbdf_t){ .sbdf = (((s) & 0xffff) << 16) | PCI_BDF2(b, df) })
>> 
>> +#define ECAM_BDF(addr)         ( ((addr) & 0x0ffff000) >> 12)
>> +#define ECAM_REG_OFFSET(addr)  ((addr) & 0x00000fff)
>> +
>> typedef union {
>>     uint32_t sbdf;
>>     struct {
>> -- 
>> 2.25.1