|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [PATCH] PCI/MSI: Move non-mask check back into low level accessors
On Wed, Oct 27 2021 at 17:29, Josef Johansson wrote:
CC+: EFIFB and scheduler folks
> On 10/27/21 14:01, Josef Johansson wrote:
> When I suspend I get errors from Xen, including stacktraces below
> if anyone has any clue, if this might be related. I get one each time I
> suspend
> and the third time amdgpu gives up.
>
> rtc_cmos 00:01: registered as rtc0
> rtc_cmos 00:01: setting system clock to 2021-10-27T15:04:35 UTC (1635347075)
> rtc_cmos 00:01: no alarms, y3k, 114 bytes nvram
> device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA
> measurements will not be recorded in the IMA log.
> device-mapper: uevent: version 1.0.3
> device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised:
> dm-devel@xxxxxxxxxx
> efifb: probing for efifb
> efifb: cannot reserve video memory at 0x60000000
> ------------[ cut here ]------------
> ioremap on RAM at 0x0000000060000000 - 0x00000000607e8fff
> WARNING: CPU: 7 PID: 1 at arch/x86/mm/ioremap.c:210
> __ioremap_caller+0x332/0x350
That's this warning:
/*
* Don't allow anybody to remap normal RAM that we're using..
*/
if (io_desc.flags & IORES_MAP_SYSTEM_RAM) {
WARN_ONCE(1, "ioremap on RAM at %pa - %pa\n",
&phys_addr, &last_addr);
return NULL;
}
> Modules linked in:
> CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.15.0-0.rc7.0.fc32.qubes.x86_64 #1
> Hardware name: LENOVO 20Y1S02400/20Y1S02400, BIOS R1BET65W(1.34 ) 06/17/2021
> RIP: e030:__ioremap_caller+0x332/0x350
> Code: e8 c3 ca ff ff 49 09 c6 e9 32 fe ff ff 48 8d 54 24 28 48 8d 74 24 18 48
> c7 c7 35 f2 5d 82 c6 05 e8 7b a9 01 01 e8 48 39 be 00 <0f> 0b 45 31 e4 e9 ac
> fe ff ff e8 ff f5 c3 00 66 66 2e 0f 1f 84 00
> RSP: e02b:ffffc9004007bb00 EFLAGS: 00010286
> RAX: 0000000000000000 RBX: 00000000007e9000 RCX: ffffffff82915ca8
> RDX: c0000000ffffdfff RSI: 0000000000000000 RDI: ffffffff82865ca0
> RBP: 0000000060000000 R08: 0000000000000000 R09: ffffc9004007b948
> R10: ffffc9004007b940 R11: ffffffff82945ce8 R12: 0000000000000001
> R13: 00000000007e9000 R14: 00000000007e9000 R15: ffffffff81c8f772
> FS: 0000000000000000(0000) GS:ffff8881407c0000(0000) knlGS:0000000000000000
> CS: e030 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 0000000000000000 CR3: 0000000002810000 CR4: 0000000000050660
> Call Trace:
> efifb_probe.cold+0x2e6/0x688
Why is this probing EFIFB at resume? Josef is that hibernate or suspend
to RAM?
> platform_probe+0x3f/0x90
> call_driver_probe+0x24/0xc0
> really_probe+0x1e7/0x310
> __driver_probe_device+0xfe/0x180
> driver_probe_device+0x1e/0x90
> __device_attach_driver+0x72/0xe0
> ? driver_allows_async_probing+0x50/0x50
> ? driver_allows_async_probing+0x50/0x50
> bus_for_each_drv+0x8f/0xd0
> __device_attach+0xe9/0x1f0
> bus_probe_device+0x8e/0xa0
> device_add+0x3fb/0x630
> platform_device_add+0x102/0x230
> sysfb_init+0xea/0x141
> ? firmware_map_add_early+0xb8/0xb8
> do_one_initcall+0x57/0x200
> do_initcalls+0x109/0x166
> kernel_init_freeable+0x23c/0x2bd
> ? rest_init+0xc0/0xc0
> kernel_init+0x16/0x120
> ret_from_fork+0x22/0x30
> ---[ end trace b068d3cd1b7f5f49 ]---
> efifb: abort, cannot remap video memory 0x7e9000 @ 0x60000000
> efi-framebuffer: probe of efi-framebuffer.0 failed with error -5
> --
> printk: Suspending console(s) (use no_console_suspend to debug)
> [drm] free PSP TMR buffer
> PM: suspend devices took 0.428 seconds
> ACPI: EC: interrupt blocked
> ACPI: PM: Preparing to enter system sleep state S3
> ACPI: EC: event blocked
> ACPI: EC: EC stopped
> ACPI: PM: Saving platform NVS memory
> Disabling non-boot CPUs ...
> ------------[ cut here ]------------
> WARNING: CPU: 1 PID: 0 at arch/x86/mm/tlb.c:522
> switch_mm_irqs_off+0x3c5/0x400
if (WARN_ON_ONCE(__read_cr3() != build_cr3(real_prev->pgd, prev_asid)))
{
> Modules linked in: snd_seq_dummy snd_hrtimer snd_seq snd_seq_device snd_timer
> nf_tables nfnetlink vfat fat intel_rapl_msr think_lmi
> firmware_attributes_class wmi_bmof intel_rapl_common pcspkr uvcvideo
> videobuf2_vmalloc videobuf2_memops joydev videobuf2_v4l2 sp5100_tco k10temp
> videobuf2_common i2c_piix4 iwlwifi videodev mc cfg80211 thinkpad_acpi
> ipmi_devintf ucsi_acpi platform_profile typec_ucsi ledtrig_audio
> ipmi_msghandler r8169 rfkill typec snd wmi soundcore video i2c_scmi fuse
> xenfs ip_tables dm_thin_pool dm_persistent_data dm_bio_prison dm_crypt
> trusted asn1_encoder hid_multitouch amdgpu crct10dif_pclmul crc32_pclmul
> crc32c_intel gpu_sched i2c_algo_bit drm_ttm_helper ghash_clmulni_intel ttm
> serio_raw drm_kms_helper cec sdhci_pci cqhci sdhci xhci_pci drm
> xhci_pci_renesas nvme xhci_hcd ehci_pci mmc_core ehci_hcd nvme_core
> xen_acpi_processor xen_privcmd xen_pciback xen_blkback xen_gntalloc
> xen_gntdev xen_evtchn uinput
> CPU: 1 PID: 0 Comm: swapper/1 Tainted: G W --------- ---
> 5.15.0-0.rc7.0.fc32.qubes.x86_64 #1
> Hardware name: LENOVO 20Y1S02400/20Y1S02400, BIOS R1BET65W(1.34 ) 06/17/2021
> RIP: e030:switch_mm_irqs_off+0x3c5/0x400
> Code: f0 41 80 65 01 fb ba 01 00 00 00 49 8d b5 60 23 00 00 4c 89 ef 49 c7 85
> 68 23 00 00 60 1d 08 81 e8 a0 f3 08 00 e9 15 fd ff ff <0f> 0b e8 34 fa ff ff
> e9 ad fc ff ff 0f 0b e9 31 fe ff ff 0f 0b e9
> RSP: e02b:ffffc900400f3eb0 EFLAGS: 00010006
> RAX: 00000001336c6000 RBX: ffff888140660000 RCX: 0000000000000040
> RDX: ffff8881003027c0 RSI: 0000000000000000 RDI: ffff8881b36c6000
> RBP: ffffffff829d91c0 R08: 0000000000000000 R09: 0000000000000000
> R10: 0000000000000008 R11: 0000000000000000 R12: ffff888104e88440
> R13: ffff8881003027c0 R14: 0000000000000000 R15: 0000000000000001
> FS: 0000000000000000(0000) GS:ffff888140640000(0000) knlGS:0000000000000000
> CS: 10000e030 DS: 002b ES: 002b CR0: 0000000080050033
> CR2: 000060b7d78bf198 CR3: 0000000002810000 CR4: 0000000000050660
> Call Trace:
> switch_mm+0x1c/0x30
> idle_task_exit+0x55/0x60
> play_dead_common+0xa/0x20
> xen_pv_play_dead+0xa/0x60
So this is when bringing the non boot CPUs down and the switch_mm() code
discovers inconsistency between CR3 and the expected value.
Would probably be interesting to print the actual values, but XEN folks
might have an idea.
> do_idle+0xd1/0xe0
> cpu_startup_entry+0x19/0x20
> asm_cpu_bringup_and_idle+0x5/0x1000
> ---[ end trace b068d3cd1b7f5f4b ]---
> smpboot: CPU 1 is now offline
> smpboot: CPU 2 is now offline
> smpboot: CPU 3 is now offline
> smpboot: CPU 4 is now offline
> smpboot: CPU 5 is now offline
> smpboot: CPU 6 is now offline
> smpboot: CPU 7 is now offline
> ACPI: PM: Low-level resume complete
> ACPI: EC: EC started
> ACPI: PM: Restoring platform NVS memory
> xen_acpi_processor: Uploading Xen processor PM info
> xen_acpi_processor: (_PXX): Hypervisor error (-19) for ACPI CPU1
> xen_acpi_processor: (_PXX): Hypervisor error (-19) for ACPI CPU3
> xen_acpi_processor: (_PXX): Hypervisor error (-19) for ACPI CPU5
> xen_acpi_processor: (_PXX): Hypervisor error (-19) for ACPI CPU7
> xen_acpi_processor: (_PXX): Hypervisor error (-19) for ACPI CPU9
> xen_acpi_processor: (_PXX): Hypervisor error (-19) for ACPI CPU11
> --
> CPU2 is up
> installing Xen timer for CPU 3
> cpu 3 spinlock event irq 79
> [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
> ACPI: \_SB_.PLTF.C003: Found 3 idle states
> ACPI: FW issue: working around C-state latencies out of order
> CPU3 is up
> ------------[ cut here ]------------
> cfs_rq->avg.load_avg || cfs_rq->avg.util_avg || cfs_rq->avg.runnable_avg
> installing Xen timer for CPU 4
> WARNING: CPU: 3 PID: 455 at kernel/sched/fair.c:3339
> __update_blocked_fair+0x49b/0x4b0
/*
* _avg must be null when _sum are null because _avg = _sum / divider
* Make sure that rounding and/or propagation of PELT values never
* break this.
*/
SCHED_WARN_ON(cfs_rq->avg.load_avg ||
cfs_rq->avg.util_avg ||
cfs_rq->avg.runnable_avg);
PeterZ, does that ring any bell?
> Modules linked in: snd_seq_dummy snd_hrtimer snd_seq snd_seq_device snd_timer
> nf_tables nfnetlink vfat fat intel_rapl_msr think_lmi
> firmware_attributes_class wmi_bmof intel_rapl_common pcspkr uvcvideo
> videobuf2_vmalloc videobuf2_memops joydev videobuf2_v4l2 sp5100_tco k10temp
> videobuf2_common i2c_piix4 iwlwifi videodev mc cfg80211 thinkpad_acpi
> ipmi_devintf ucsi_acpi platform_profile typec_ucsi ledtrig_audio
> ipmi_msghandler r8169 rfkill typec snd wmi soundcore video i2c_scmi fuse
> xenfs ip_tables dm_thin_pool dm_persistent_data dm_bio_prison dm_crypt
> trusted asn1_encoder hid_multitouch amdgpu crct10dif_pclmul crc32_pclmul
> crc32c_intel gpu_sched i2c_algo_bit drm_ttm_helper ghash_clmulni_intel ttm
> serio_raw drm_kms_helper cec sdhci_pci cqhci sdhci xhci_pci drm
> xhci_pci_renesas nvme xhci_hcd ehci_pci mmc_core ehci_hcd nvme_core
> xen_acpi_processor xen_privcmd xen_pciback xen_blkback xen_gntalloc
> xen_gntdev xen_evtchn uinput
> CPU: 3 PID: 455 Comm: kworker/3:2 Tainted: G W --------- ---
> 5.15.0-0.rc7.0.fc32.qubes.x86_64 #1
> Hardware name: LENOVO 20Y1S02400/20Y1S02400, BIOS R1BET65W(1.34 ) 06/17/2021
> Workqueue: 0x0 (events)
> RIP: e030:__update_blocked_fair+0x49b/0x4b0
> Code: 6b fd ff ff 49 8b 96 48 01 00 00 48 89 90 50 09 00 00 e9 ff fc ff ff 48
> c7 c7 10 7a 5e 82 c6 05 f3 35 9e 01 01 e8 1f f3 b2 00 <0f> 0b 41 8b 86 38 01
> 00 00 e9 c6 fc ff ff 0f 1f 80 00 00 00 00 0f
> RSP: e02b:ffffc900410d7ce0 EFLAGS: 00010082
> RAX: 0000000000000000 RBX: 0000000000000018 RCX: ffff8881406d8a08
> RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff8881406d8a00
> RBP: ffff8881406e9800 R08: 0000000000000048 R09: ffffc900410d7c78
> R10: 0000000000000049 R11: 000000002d2d2d2d R12: ffff8881406e9f80
> R13: ffff8881406e9e40 R14: ffff8881406e96c0 R15: 0000000000000000
> FS: 0000000000000000(0000) GS:ffff8881406c0000(0000) knlGS:0000000000000000
> CS: 10000e030 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 0000782e51820000 CR3: 0000000002810000 CR4: 0000000000050660
> Call Trace:
> update_blocked_averages+0xa8/0x180
> newidle_balance+0x175/0x380
> pick_next_task_fair+0x39/0x3e0
> pick_next_task+0x4c/0xbd0
> ? dequeue_task_fair+0xba/0x390
> __schedule+0x13a/0x570
> schedule+0x44/0xa0
> worker_thread+0xc0/0x320
> ? process_one_work+0x390/0x390
> kthread+0x10f/0x130
> ? set_kthread_struct+0x40/0x40
> ret_from_fork+0x22/0x30
> ---[ end trace b068d3cd1b7f5f4c ]---
> cpu 4 spinlock event irq 85
> [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
> ACPI: \_SB_.PLTF.C004: Found 3 idle states
> ACPI: FW issue: working around C-state latencies out of order
> CPU4 is up
> installing Xen timer for CPU 5
> cpu 5 spinlock event irq 91
> [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
> ACPI: \_SB_.PLTF.C005: Found 3 idle states
> ACPI: FW issue: working around C-state latencies out of order
> CPU5 is up
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |