Re: [PATCH 00/10] Add support for Renesas R-Car S4 IPMMU and other misc changes

[Oleksandr <olekstysh@xxxxxxxxx>]

On 27.11.21 19:51, Oleksandr Tyshchenko wrote:


Hello all.

Gentle reminder.

> From: Oleksandr Tyshchenko <oleksandr_tyshchenko@xxxxxxxx>
>
> The R-Car S4 is an automotive System-on-Chip (SoC) for Car Server/Communication
> Gateway and is one of the first products in Renesas’ 4th-generation R-Car 
> Family.
>
> The integrated IOMMU HW is also VMSA-compatible and supports stage 2 translation
> table format, therefore can be used with current R-Car Gen3 driver with slight
> modifications.
>
> In the context of Xen driver the main differences between Gen3 and S4 are
> the following:
>   - HW capacity was enlarged to support up to 16 IPMMU contexts (sets of page 
> table)
>     and up to 64 micro-TLBs per IPMMU device
>   - the memory mapped registers have different bases and offset
>
> The first part (commits #1-6) is a non-verbatim port of Linux upstream commits
> needed to add support for S4 series easily (prereq work).
> The second part (commits #7-8) is based on the code from the Renesas BSP and
> actually introduces support for R-Car S4 IPMMU.
> The third part (commits #9-10) is misc changes I have locally.
>
> The patch series is based on 4.16.0-rc4 branch and also available at [1].
>
> Tested on Renesas Salvator-X board with H3 ES3.0 SoC (Gen3) and Renesas Spider
> board with S4 SoC.
>
> [1] https://github.com/otyshchenko1/xen/commits/s4_ipmmu_ml1
>
> Oleksandr Tyshchenko (10):
>    iommu/ipmmu-vmsa: Remove all unused register definitions
>    iommu/ipmmu-vmsa: Add helper functions for MMU "context" registers
>    iommu/ipmmu-vmsa: Add helper functions for "uTLB" registers
>    iommu/ipmmu-vmsa: Add light version of Linux's ipmmu_features
>    iommu/ipmmu-vmsa: Calculate context registers' offset instead of a
>      macro
>    iommu/ipmmu-vmsa: Add utlb_offset_base
>    iommu/ipmmu-vmsa: Add Renesas R8A779F0 (R-Car S4) support
>    iommu/ipmmu-vmsa: Set IPMMU bit IMSCTLR_USE_SECGRP to 0
>    iommu/ipmmu-vmsa: Use refcount for the micro-TLBs
>    iommu/arm: Remove code duplication in all IOMMU drivers
>
>   xen/drivers/passthrough/Kconfig          |   6 +-
>   xen/drivers/passthrough/arm/iommu.c      |   7 +
>   xen/drivers/passthrough/arm/ipmmu-vmsa.c | 278 +++++++++++++++++++------------
>   xen/drivers/passthrough/arm/smmu-v3.c    |  10 --
>   xen/drivers/passthrough/arm/smmu.c       |  10 --
>   5 files changed, 178 insertions(+), 133 deletions(-)
--
Regards,

Oleksandr Tyshchenko