[XEN PATCH v2 0/5] dom0less PV drivers

[Stefano Stabellini <sstabellini@xxxxxxxxxx>]

Hi all,

Currently dom0less guests cannot use PV drivers because they don't have
access to xenstore. Also, the hypervisor node in device tree is missing
so they don't detect that they are running on Xen (thus, they don't try
to enable PV interfaces.)

This patch series enables dom0less guests (on ARM) to use PV drivers.

Instead of initializing xenstore immediately at boot, dom0less guests
get access to xenstore later. They delay the initialization until they
receive a notification via the xenstore event channel (which is
available at boot.)

An example workflow is as follows:
- all domains start in parallel, dom0less guests are immediately running
- when dom0 is up and running, the init-dom0less application is called
- dom0less guests receive the notification and initialize xenstore
- now xl network-attach/disk-attach works as expected for dom0less domUs

The patch series introduces a new dom0less device tree option
"xen,enhanced" (in the Xen device tree) to specify whether PV interfaces
should be enabled/disabled for the dom0less guest.

Cheers,

Stefano


Luca Miccio (3):
      xen/arm: configure dom0less domain for enabling xenstore after boot
      xenstored: send an evtchn notification on introduce_domain
      tools: add example application to initialize dom0less PV drivers

Stefano Stabellini (2):
      xen: introduce xen,enhanced dom0less property
      xen: export get_free_port

 docs/misc/arm/device-tree/booting.txt |  18 +++
 tools/helpers/Makefile                |  13 ++
 tools/helpers/init-dom0less.c         | 266 ++++++++++++++++++++++++++++++++++
 tools/xenstore/xenstored_domain.c     |   3 +
 xen/arch/arm/domain_build.c           |  51 +++++++
 xen/arch/arm/include/asm/kernel.h     |   3 +
 xen/common/event_channel.c            |   2 +-
 xen/include/xen/event.h               |   3 +
 8 files changed, 358 insertions(+), 1 deletion(-)
 create mode 100644 tools/helpers/init-dom0less.c