|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [ovmf test] 168387: regressions - FAIL
flight 168387 ovmf real [real] http://logs.test-lab.xenproject.org/osstest/logs/168387/ Regressions :-( Tests which did not succeed and are blocking, including tests which could not be run: build-amd64 6 xen-build fail REGR. vs. 168254 build-amd64-xsm 6 xen-build fail REGR. vs. 168254 build-i386 6 xen-build fail REGR. vs. 168254 build-i386-xsm 6 xen-build fail REGR. vs. 168254 Tests which did not succeed, but are not blocking: build-amd64-libvirt 1 build-check(1) blocked n/a build-i386-libvirt 1 build-check(1) blocked n/a test-amd64-amd64-xl-qemuu-ovmf-amd64 1 build-check(1) blocked n/a test-amd64-i386-xl-qemuu-ovmf-amd64 1 build-check(1) blocked n/a version targeted for testing: ovmf 589d51df260465e2561979b8a988e77b0f32a6e8 baseline version: ovmf b1b89f9009f2390652e0061bd7b24fc40732bc70 Last test of basis 168254 2022-02-28 10:41:46 Z 3 days Failing since 168258 2022-03-01 01:55:31 Z 2 days 28 attempts Testing same since 168359 2022-03-03 10:41:39 Z 0 days 8 attempts ------------------------------------------------------------ People who touched revisions under test: Guomin Jiang <guomin.jiang@xxxxxxxxx> Jason <yun.lou@xxxxxxxxx> Jason Lou <yun.lou@xxxxxxxxx> Matt DeVillier <matt.devillier@xxxxxxxxx> Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx> Sean Rhodes <sean@starlabs.systems> Xiaolu.Jiang <xiaolu.jiang@xxxxxxxxx> jobs: build-amd64-xsm fail build-i386-xsm fail build-amd64 fail build-i386 fail build-amd64-libvirt blocked build-i386-libvirt blocked build-amd64-pvops pass build-i386-pvops pass test-amd64-amd64-xl-qemuu-ovmf-amd64 blocked test-amd64-i386-xl-qemuu-ovmf-amd64 blocked ------------------------------------------------------------ sg-report-flight on osstest.test-lab.xenproject.org logs: /home/logs/logs images: /home/logs/images Logs, config files, etc. are available at http://logs.test-lab.xenproject.org/osstest/logs Explanation of these reports, and of osstest in general, is at http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README.email;hb=master http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README;hb=master Test harness code can be found at http://xenbits.xen.org/gitweb?p=osstest.git;a=summary Not pushing. ------------------------------------------------------------ commit 589d51df260465e2561979b8a988e77b0f32a6e8 Author: Sean Rhodes <sean@starlabs.systems> Date: Thu Feb 24 19:38:18 2022 +0800 MdeModulePkg/Usb/Keyboard.c: Don't request protocol before setting No need to check the interface protocol then conditionally setting, just set it to BOOT_PROTOCOL and check for error. This is what Linux does for HID devices as some don't follow the USB spec. One example is the Aspeed BMC HID keyboard device, which adds a massive boot delay without this patch as it doesn't respond to 'GetProtocolRequest'. Cc: Hao A Wu <hao.a.wu@xxxxxxxxx> Cc: Ray Ni <ray.ni@xxxxxxxxx> Signed-off-by: Matt DeVillier <matt.devillier@xxxxxxxxx> Signed-off-by: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx> Signed-off-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Hao A Wu <hao.a.wu@xxxxxxxxx> commit b422b0fcf92dd4103dfc16d8d5f77fbec2d8c5b9 Author: Guomin Jiang <guomin.jiang@xxxxxxxxx> Date: Tue Feb 22 11:29:23 2022 +0800 EmulatorPkg/EmuGopDxe: Set ModeInfo after Open successfully REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2668 WindowOpen will fail in some case. for example, without XServer. Shouldn't set ModeInfo in this case to avoid the caller use it incorrectly Reviewed-by: Ray Ni <ray.ni@xxxxxxxxx> Signed-off-by: Guomin Jiang <guomin.jiang@xxxxxxxxx> commit 906242343f7a654402f6f999d447aa9d29a8f4d4 Author: Guomin Jiang <guomin.jiang@xxxxxxxxx> Date: Sun Feb 20 14:53:01 2022 +0800 MdeModulePkg/GraphicsConsoleDxe: Check status to make sure no error REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2668 SetMode will fail in some case. for example, without XServer. Should handle these case when SetMode fail. If we don't handle it, it will Segmentation fault. Reviewed-by: Ray Ni <ray.ni@xxxxxxxxx> Signed-off-by: Guomin Jiang <guomin.jiang@xxxxxxxxx> commit dc39554d58af4a50b50eca1f57c49415a12b0c98 Author: Xiaolu.Jiang <xiaolu.jiang@xxxxxxxxx> Date: Tue Feb 22 22:14:05 2022 +0800 edk2/MdeModulePkg/Debuglib: Add Standalone MM support https://bugzilla.tianocore.org/show_bug.cgi?id=3844 This change added Standalone MM instance of DebugLib. Reviewd-by: Jian J Wang <jian.j.wang@xxxxxxxxx> Reviewd-by: Liming Gao <gaoliming@xxxxxxxxxxxxxx> Signed-off-by: Xiaolu.Jiang <xiaolu.jiang@xxxxxxxxx> commit 497ac7b6d7f9750f48f137db244931a5728b1968 Author: Guomin Jiang <guomin.jiang@xxxxxxxxx> Date: Sat Jan 29 16:28:02 2022 +0800 UefiPayloadPkg/PayloadLoaderPeim: Use INT64 as input parameter REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3818 It will have some potential issue when memory larger than 2G because the high memory address will be fill with 0xFFFFFFFF when do the operation of INTN + INT64 but it is 32 bit normal data in fact. Should use same data type INT64 + INT64. V3: 1. Use INT64 as input parameter because all date type is 64 bit V2: 1. Force the data type to UINTN to avoid high dword be filled with 0xFFFFFFFF 2. Keep INTN because the offset may postive or negative. Reviewed-by: Guo Dong <guo.dong@xxxxxxxxx> Reviewed-by: Ray Ni <ray.ni@xxxxxxxxx> Signed-off-by: Guomin Jiang <guomin.jiang@xxxxxxxxx> commit 6a890db161cd6d378bec3499a1e774db3f5a27a7 Author: Jason <yun.lou@xxxxxxxxx> Date: Mon Jan 10 22:30:29 2022 +0800 BaseTools: Upgrade the version of NASM tool REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3790 Upgrade the version of NASM tool to avoid compilation errors when compiling NASM code change. Signed-off-by: Jason Lou <yun.lou@xxxxxxxxx> Cc: Bob Feng <bob.c.feng@xxxxxxxxx> Cc: Liming Gao <gaoliming@xxxxxxxxxxxxxx> Reviewed-by: Yuwei Chen <yuwei.chen@xxxxxxxxx> commit bbaa00dd01ed0df30e43a5a89fd2b0433d858b73 Author: Jason <yun.lou@xxxxxxxxx> Date: Mon Jan 10 22:05:47 2022 +0800 MdePkg: Remove the macro definitions regarding Opcode. REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3790 Remove the macro definitions regarding Opcode because new version of NASM tool(e.g. v2.15.05) supports the corresponding instructions. Note: This patch need to be merged after other NASM code change to avoid compilation errors. Signed-off-by: Jason Lou <yun.lou@xxxxxxxxx> Cc: Michael D Kinney <michael.d.kinney@xxxxxxxxx> Reviewed-by: Liming Gao <gaoliming@xxxxxxxxxxxxxx> Cc: Zhiguang Liu <zhiguang.liu@xxxxxxxxx> commit 2aa107c0aa2e1375651867c8df1b81ff64b67fce Author: Jason <yun.lou@xxxxxxxxx> Date: Mon Jan 10 22:01:18 2022 +0800 UefiCpuPkg: Replace Opcode with the corresponding instructions. REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3790 Replace Opcode with the corresponding instructions. The code changes have been verified with CompareBuild.py tool, which can be used to compare the results of two different EDK II builds to determine if they generate the same binaries. (tool link: https://github.com/mdkinney/edk2/tree/sandbox/CompareBuild) Signed-off-by: Jason Lou <yun.lou@xxxxxxxxx> Reviewed-by: Ray Ni <ray.ni@xxxxxxxxx> Cc: Eric Dong <eric.dong@xxxxxxxxx> Cc: Laszlo Ersek <lersek@xxxxxxxxxx> Cc: Rahul Kumar <rahul1.kumar@xxxxxxxxx> commit 7bc8b1d9f412507d579f21ea9af56fced81e7827 Author: Jason <yun.lou@xxxxxxxxx> Date: Mon Jan 10 21:52:52 2022 +0800 SourceLevelDebugPkg: Replace Opcode with the corresponding instructions. REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3790 Replace Opcode with the corresponding instructions. The code changes have been verified with CompareBuild.py tool, which can be used to compare the results of two different EDK II builds to determine if they generate the same binaries. (tool link: https://github.com/mdkinney/edk2/tree/sandbox/CompareBuild) Signed-off-by: Jason Lou <yun.lou@xxxxxxxxx> Reviewed-by: Hao A Wu <hao.a.wu@xxxxxxxxx> commit d3febfd9ade35dc552df6b3607c2b15d26b82867 Author: Jason <yun.lou@xxxxxxxxx> Date: Mon Jan 10 21:46:27 2022 +0800 MdePkg: Replace Opcode with the corresponding instructions. REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3790 Replace Opcode with the corresponding instructions. The code changes have been verified with CompareBuild.py tool, which can be used to compare the results of two different EDK II builds to determine if they generate the same binaries. (tool link: https://github.com/mdkinney/edk2/tree/sandbox/CompareBuild) Signed-off-by: Jason Lou <yun.lou@xxxxxxxxx> Cc: Michael D Kinney <michael.d.kinney@xxxxxxxxx> Reviewed-by: Liming Gao <gaoliming@xxxxxxxxxxxxxx> Cc: Zhiguang Liu <zhiguang.liu@xxxxxxxxx> commit 84338c0d498555f860a480693ee8647a1795fba3 Author: Jason <yun.lou@xxxxxxxxx> Date: Mon Jan 10 21:04:09 2022 +0800 MdeModulePkg: Replace Opcode with the corresponding instructions. REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3790 Replace Opcode with the corresponding instructions. The code changes have been verified with CompareBuild.py tool, which can be used to compare the results of two different EDK II builds to determine if they generate the same binaries. (tool link: https://github.com/mdkinney/edk2/tree/sandbox/CompareBuild) Signed-off-by: Jason Lou <yun.lou@xxxxxxxxx> Reviewed-by: Ray Ni <ray.ni@xxxxxxxxx> Cc: Dandan Bi <dandan.bi@xxxxxxxxx> Reviewed-by: Liming Gao <gaoliming@xxxxxxxxxxxxxx>
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |