[PATCH V2 1/2] xen/arm: Add i.MX lpuart driver

["Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>]

From: Peng Fan <peng.fan@xxxxxxx>

The i.MX LPUART Documentation:
https://www.nxp.com/webapp/Download?colCode=IMX8QMIEC
Chatper 13.6 Low Power Universal Asynchronous Receiver/
Transmitter (LPUART)

Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
---
 xen/drivers/char/Kconfig      |   8 +
 xen/drivers/char/Makefile     |   1 +
 xen/drivers/char/imx-lpuart.c | 275 ++++++++++++++++++++++++++++++++++
 xen/include/xen/imx-lpuart.h  |  64 ++++++++
 4 files changed, 348 insertions(+)
 create mode 100644 xen/drivers/char/imx-lpuart.c
 create mode 100644 xen/include/xen/imx-lpuart.h

diff --git a/xen/drivers/char/Kconfig b/xen/drivers/char/Kconfig
index 2ff5b288e2..0efdb2128f 100644
--- a/xen/drivers/char/Kconfig
+++ b/xen/drivers/char/Kconfig
@@ -13,6 +13,14 @@ config HAS_CADENCE_UART
          This selects the Xilinx Zynq Cadence UART. If you have a Xilinx Zynq
          based board, say Y.
 
+config HAS_IMX_LPUART
+       bool "i.MX LPUART driver"
+       default y
+       depends on ARM_64
+       help
+         This selects the i.MX LPUART. If you have a i.MX8QM based board,
+         say Y.
+
 config HAS_MVEBU
        bool "Marvell MVEBU UART driver"
        default y
diff --git a/xen/drivers/char/Makefile b/xen/drivers/char/Makefile
index 7c646d771c..14e67cf072 100644
--- a/xen/drivers/char/Makefile
+++ b/xen/drivers/char/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_HAS_MVEBU) += mvebu-uart.o
 obj-$(CONFIG_HAS_OMAP) += omap-uart.o
 obj-$(CONFIG_HAS_SCIF) += scif-uart.o
 obj-$(CONFIG_HAS_EHCI) += ehci-dbgp.o
+obj-$(CONFIG_HAS_IMX_LPUART) += imx-lpuart.o
 obj-$(CONFIG_ARM) += arm-uart.o
 obj-y += serial.o
 obj-$(CONFIG_XEN_GUEST) += xen_pv_console.o
diff --git a/xen/drivers/char/imx-lpuart.c b/xen/drivers/char/imx-lpuart.c
new file mode 100644
index 0000000000..49330fd2f8
--- /dev/null
+++ b/xen/drivers/char/imx-lpuart.c
@@ -0,0 +1,275 @@
+/*
+ * xen/drivers/char/imx-lpuart.c
+ *
+ * Driver for i.MX LPUART.
+ *
+ * Peng Fan <peng.fan@xxxxxxx>
+ * Copyright 2022 NXP
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <xen/errno.h>
+#include <xen/imx-lpuart.h>
+#include <xen/init.h>
+#include <xen/irq.h>
+#include <xen/mm.h>
+#include <xen/serial.h>
+#include <asm/device.h>
+#include <asm/io.h>
+
+#define imx_lpuart_read(uart, off)       readl((uart)->regs + off)
+#define imx_lpuart_write(uart, off, val) writel((val), (uart)->regs + off)
+
+static struct imx_lpuart {
+    uint32_t baud, clock_hz, data_bits, parity, stop_bits, fifo_size;
+    uint32_t irq;
+    char __iomem *regs;
+    struct irqaction irqaction;
+    struct vuart_info vuart;
+} imx8_com;
+
+static void imx_lpuart_interrupt(int irq, void *data,
+                                 struct cpu_user_regs *regs)
+{
+    struct serial_port *port = data;
+    struct imx_lpuart *uart = port->uart;
+    uint32_t sts, rxcnt;
+
+    sts = imx_lpuart_read(uart, UARTSTAT);
+    rxcnt = imx_lpuart_read(uart, UARTWATER) >> UARTWATER_RXCNT_OFF;
+
+    if ( (sts & UARTSTAT_RDRF) || (rxcnt > 0) )
+           serial_rx_interrupt(port, regs);
+
+    if ( sts & UARTSTAT_TDRE )
+           serial_tx_interrupt(port, regs);
+
+    imx_lpuart_write(uart, UARTSTAT, sts);
+}
+
+static void __init imx_lpuart_init_preirq(struct serial_port *port)
+{
+    struct imx_lpuart *uart = port->uart;
+    uint32_t ctrl, old_ctrl, bd;
+
+    ctrl = old_ctrl = imx_lpuart_read(uart, UARTCTRL);
+    ctrl = (old_ctrl & ~UARTCTRL_M) | UARTCTRL_TE | UARTCTRL_RE;
+    bd = imx_lpuart_read(uart, UARTBAUD);
+
+    while ( !(imx_lpuart_read(uart, UARTSTAT) & UARTSTAT_TC) )
+           cpu_relax();
+
+    /* Disable transmit and receive */
+    imx_lpuart_write(uart, UARTCTRL, old_ctrl & ~(UARTCTRL_TE | UARTCTRL_RE));
+
+    /* Reuse firmware baudrate settings, only disable DMA here */
+    bd &= ~(UARTBAUD_TDMAE | UARTBAUD_RDMAE);
+
+    imx_lpuart_write(uart, UARTMODIR, 0);
+    imx_lpuart_write(uart, UARTBAUD, bd);
+    imx_lpuart_write(uart, UARTCTRL, ctrl);
+}
+
+static void __init imx_lpuart_init_postirq(struct serial_port *port)
+{
+    struct imx_lpuart *uart = port->uart;
+    uint32_t temp;
+
+    uart->irqaction.handler = imx_lpuart_interrupt;
+    uart->irqaction.name = "imx_lpuart";
+    uart->irqaction.dev_id = port;
+
+    if ( setup_irq(uart->irq, 0, &uart->irqaction) != 0 )
+    {
+        dprintk(XENLOG_ERR, "Failed to allocate imx_lpuart IRQ %d\n",
+                uart->irq);
+        return;
+    }
+
+    /* Enable interrupts */
+    temp = imx_lpuart_read(uart, UARTCTRL);
+    temp |= (UARTCTRL_RIE | UARTCTRL_TIE);
+    temp |= UARTCTRL_ILIE;
+    imx_lpuart_write(uart, UARTCTRL, temp);
+}
+
+static void imx_lpuart_suspend(struct serial_port *port)
+{
+    BUG();
+}
+
+static void imx_lpuart_resume(struct serial_port *port)
+{
+    BUG();
+}
+
+static int imx_lpuart_tx_ready(struct serial_port *port)
+{
+    struct imx_lpuart *uart = port->uart;
+
+    return imx_lpuart_read(uart, UARTSTAT) & UARTSTAT_TC;
+}
+
+static void imx_lpuart_putc(struct serial_port *port, char c)
+{
+    struct imx_lpuart *uart = port->uart;
+
+    while ( !(imx_lpuart_read(uart, UARTSTAT) & UARTSTAT_TDRE) )
+        cpu_relax();
+
+    imx_lpuart_write(uart, UARTDATA, c);
+}
+
+static int imx_lpuart_getc(struct serial_port *port, char *pc)
+{
+    struct imx_lpuart *uart = port->uart;
+    int ch;
+
+    while ( !(imx_lpuart_read(uart, UARTSTAT) & UARTSTAT_RDRF) )
+           return 0;
+
+    ch = imx_lpuart_read(uart, UARTDATA);
+    *pc = ch & 0xff;
+
+    if ( imx_lpuart_read(uart, UARTSTAT) &  UARTSTAT_OR )
+        imx_lpuart_write(uart, UARTSTAT, UARTSTAT_OR);
+
+    return 1;
+}
+
+static int __init imx_lpuart_irq(struct serial_port *port)
+{
+    struct imx_lpuart *uart = port->uart;
+
+    return ((uart->irq > 0) ? uart->irq : -1);
+}
+
+static const struct vuart_info *imx_lpuart_vuart_info(struct serial_port *port)
+{
+    struct imx_lpuart *uart = port->uart;
+
+    return &uart->vuart;
+}
+
+static void imx_lpuart_start_tx(struct serial_port *port)
+{
+    struct imx_lpuart *uart = port->uart;
+    uint32_t temp;
+
+    temp = imx_lpuart_read(uart, UARTSTAT);
+    /* Wait until empty */
+    while ( !(temp & UARTSTAT_TDRE) )
+           cpu_relax();
+
+    temp = imx_lpuart_read(uart, UARTCTRL);
+    imx_lpuart_write(uart, UARTCTRL, (temp | UARTCTRL_TIE));
+}
+
+static void imx_lpuart_stop_tx(struct serial_port *port)
+{
+    struct imx_lpuart *uart = port->uart;
+    uint32_t temp;
+
+    temp = imx_lpuart_read(uart, UARTCTRL);
+    temp &= ~(UARTCTRL_TIE | UARTCTRL_TCIE);
+    imx_lpuart_write(uart, UARTCTRL, temp);
+}
+
+static struct uart_driver __read_mostly imx_lpuart_driver = {
+    .init_preirq = imx_lpuart_init_preirq,
+    .init_postirq = imx_lpuart_init_postirq,
+    .endboot = NULL,
+    .suspend = imx_lpuart_suspend,
+    .resume = imx_lpuart_resume,
+    .tx_ready = imx_lpuart_tx_ready,
+    .putc = imx_lpuart_putc,
+    .getc = imx_lpuart_getc,
+    .irq = imx_lpuart_irq,
+    .start_tx = imx_lpuart_start_tx,
+    .stop_tx = imx_lpuart_stop_tx,
+    .vuart_info = imx_lpuart_vuart_info,
+};
+
+static int __init imx_lpuart_init(struct dt_device_node *dev,
+                                  const void *data)
+{
+    const char *config = data;
+    struct imx_lpuart *uart;
+    int res;
+    u64 addr, size;
+
+    if ( strcmp(config, "") )
+        printk("WARNING: UART configuration is not supported\n");
+
+    uart = &imx8_com;
+
+    uart->baud = 115200;
+    uart->data_bits = 8;
+    uart->parity = 0;
+    uart->stop_bits = 1;
+
+    res = dt_device_get_address(dev, 0, &addr, &size);
+    if ( res )
+    {
+        printk("imx8-lpuart: Unable to retrieve the base"
+               " address of the UART\n");
+        return res;
+    }
+
+    res = platform_get_irq(dev, 0);
+    if ( res < 0 )
+    {
+        printk("imx8-lpuart: Unable to retrieve the IRQ\n");
+        return -EINVAL;
+    }
+    uart->irq = res;
+
+    uart->regs = ioremap_nocache(addr, size);
+    if ( !uart->regs )
+    {
+        printk("imx8-lpuart: Unable to map the UART memory\n");
+        return -ENOMEM;
+    }
+
+    uart->vuart.base_addr = addr;
+    uart->vuart.size = size;
+    uart->vuart.data_off = UARTDATA;
+    /* tmp from uboot */
+    uart->vuart.status_off = UARTSTAT;
+    uart->vuart.status = UARTSTAT_TDRE;
+
+    /* Register with generic serial driver */
+    serial_register_uart(SERHND_DTUART, &imx_lpuart_driver, uart);
+
+    dt_device_set_used_by(dev, DOMID_XEN);
+
+    return 0;
+}
+
+static const struct dt_device_match imx_lpuart_dt_compat[] __initconst =
+{
+    DT_MATCH_COMPATIBLE("fsl,imx8qm-lpuart"),
+    {},
+};
+
+DT_DEVICE_START(imx_lpuart, "i.MX LPUART", DEVICE_SERIAL)
+    .dt_match = imx_lpuart_dt_compat,
+    .init = imx_lpuart_init,
+DT_DEVICE_END
+/*
+ * Local variables:
+ * mode: C
+ * c-file-style: "BSD"
+ * c-basic-offset: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
diff --git a/xen/include/xen/imx-lpuart.h b/xen/include/xen/imx-lpuart.h
new file mode 100644
index 0000000000..945ab1c4fa
--- /dev/null
+++ b/xen/include/xen/imx-lpuart.h
@@ -0,0 +1,64 @@
+/*
+ * xen/include/asm-arm/imx-lpuart.h
+ *
+ * Common constant definition between early printk and the LPUART driver
+ *
+ * Peng Fan <peng.fan@xxxxxxx>
+ * Copyright 2022 NXP
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARM_IMX_LPUART_H
+#define __ASM_ARM_IMX_LPUART_H
+
+/* 32-bit register definition */
+#define UARTBAUD          (0x10)
+#define UARTSTAT          (0x14)
+#define UARTCTRL          (0x18)
+#define UARTDATA          (0x1C)
+#define UARTMATCH         (0x20)
+#define UARTMODIR         (0x24)
+#define UARTFIFO          (0x28)
+#define UARTWATER         (0x2c)
+
+#define UARTSTAT_TDRE     (1 << 23)
+#define UARTSTAT_TC       (1 << 22)
+#define UARTSTAT_RDRF     (1 << 21)
+#define UARTSTAT_OR       (1 << 19)
+
+#define UARTBAUD_OSR_SHIFT (24)
+#define UARTBAUD_OSR_MASK (0x1f)
+#define UARTBAUD_SBR_MASK (0x1fff)
+#define UARTBAUD_BOTHEDGE (0x00020000)
+#define UARTBAUD_TDMAE    (0x00800000)
+#define UARTBAUD_RDMAE    (0x00200000)
+
+#define UARTCTRL_TIE      (1 << 23)
+#define UARTCTRL_TCIE     (1 << 22)
+#define UARTCTRL_RIE      (1 << 21)
+#define UARTCTRL_ILIE     (1 << 20)
+#define UARTCTRL_TE       (1 << 19)
+#define UARTCTRL_RE       (1 << 18)
+#define UARTCTRL_M        (1 << 4)
+
+#define UARTWATER_RXCNT_OFF     24
+
+#endif /* __ASM_ARM_IMX_LPUART_H */
+
+/*
+ * Local variables:
+ * mode: C
+ * c-file-style: "BSD"
+ * c-basic-offset: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
-- 
2.35.1