Re: [PATCH V3 1/2] xen/arm: Add i.MX lpuart driver

[Michal Orzel <michal.orzel@xxxxxxx>]

Hi Peng,

On 07.04.2022 04:44, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@xxxxxxx>
> 
> The i.MX LPUART Documentation:
> https://www.nxp.com/webapp/Download?colCode=IMX8QMIEC
> Chatper 13.6 Low Power Universal Asynchronous Receiver/
> Transmitter (LPUART)
> 
> Tested-by: Henry Wang <Henry.Wang@xxxxxxx>
> Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
> ---
>  xen/arch/arm/include/asm/imx-lpuart.h |  64 ++++++
>  xen/drivers/char/Kconfig              |   7 +
>  xen/drivers/char/Makefile             |   1 +
>  xen/drivers/char/imx-lpuart.c         | 276 ++++++++++++++++++++++++++
>  4 files changed, 348 insertions(+)
>  create mode 100644 xen/arch/arm/include/asm/imx-lpuart.h
>  create mode 100644 xen/drivers/char/imx-lpuart.c
> 
> diff --git a/xen/arch/arm/include/asm/imx-lpuart.h 
> b/xen/arch/arm/include/asm/imx-lpuart.h
> new file mode 100644
> index 0000000000..111640edb4
> --- /dev/null
> +++ b/xen/arch/arm/include/asm/imx-lpuart.h
> @@ -0,0 +1,64 @@
> +/*
> + * xen/arch/arm/include/asm/imx-lpuart.h
> + *
> + * Common constant definition between early printk and the LPUART driver
> + *
> + * Peng Fan <peng.fan@xxxxxxx>
> + * Copyright 2022 NXP
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef __ASM_ARM_IMX_LPUART_H__
> +#define __ASM_ARM_IMX_LPUART_H__
> +
> +/* 32-bit register definition */
> +#define UARTBAUD          (0x10)
> +#define UARTSTAT          (0x14)
> +#define UARTCTRL          (0x18)
> +#define UARTDATA          (0x1C)
> +#define UARTMATCH         (0x20)
> +#define UARTMODIR         (0x24)
> +#define UARTFIFO          (0x28)
> +#define UARTWATER         (0x2c)
> +
> +#define UARTSTAT_TDRE     BIT(23)
> +#define UARTSTAT_TC       BIT(22)
> +#define UARTSTAT_RDRF     BIT(21)
> +#define UARTSTAT_OR       BIT(19)
> +
> +#define UARTBAUD_OSR_SHIFT (24)
> +#define UARTBAUD_OSR_MASK (0x1f)
> +#define UARTBAUD_SBR_MASK (0x1fff)
> +#define UARTBAUD_BOTHEDGE (0x00020000)
> +#define UARTBAUD_TDMAE    (0x00800000)
> +#define UARTBAUD_RDMAE    (0x00200000)
Could you please align the values at least within the section?

Cheers,
Michal