[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH V4 2/2] xen/arm: Add i.MX lpuart early printk support



Hi Peng,

On 08.04.2022 16:09, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@xxxxxxx>
> 
> Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
> ---
>  xen/arch/arm/Kconfig.debug              | 14 +++++++
>  xen/arch/arm/arm64/debug-imx-lpuart.inc | 52 +++++++++++++++++++++++++
>  2 files changed, 66 insertions(+)
>  create mode 100644 xen/arch/arm/arm64/debug-imx-lpuart.inc
> 
> diff --git a/xen/arch/arm/Kconfig.debug b/xen/arch/arm/Kconfig.debug
> index 35ccd13273..842d768280 100644
> --- a/xen/arch/arm/Kconfig.debug
> +++ b/xen/arch/arm/Kconfig.debug
> @@ -58,6 +58,16 @@ choice
>                       This option is preferred over the platform specific
>                       options; the platform specific options are deprecated
>                       and will soon be removed.
> +     config EARLY_UART_CHOICE_IMX_LPUART
> +             select EARLY_UART_IMX_LPUART
> +             depends on ARM_64
> +             bool "Early printk via i.MX LPUART"
> +             help
> +                     Say Y here if you wish the early printk to direct their
> +                     output to a i.MX LPUART. You can use this option to
> +                     provide the parameters for the i.MX LPUART rather than
> +                     selecting one of the platform specific options below if
> +                     you know the parameters for the port.
>       config EARLY_UART_CHOICE_MESON
>               select EARLY_UART_MESON
>               depends on ARM_64
> @@ -186,6 +196,9 @@ config EARLY_UART_CADENCE
>  config EARLY_UART_EXYNOS4210
>       select EARLY_PRINTK
>       bool
> +config EARLY_UART_IMX_LPUART
> +     select EARLY_PRINTK
> +     bool
>  config EARLY_UART_MESON
>       select EARLY_PRINTK
>       bool
> @@ -283,6 +296,7 @@ config EARLY_PRINTK_INC
>       default "debug-8250.inc" if EARLY_UART_8250
>       default "debug-cadence.inc" if EARLY_UART_CADENCE
>       default "debug-exynos4210.inc" if EARLY_UART_EXYNOS4210
> +     default "debug-imx-lpuart.inc" if EARLY_UART_IMX_LPUART
>       default "debug-meson.inc" if EARLY_UART_MESON
>       default "debug-mvebu.inc" if EARLY_UART_MVEBU
>       default "debug-pl011.inc" if EARLY_UART_PL011
> diff --git a/xen/arch/arm/arm64/debug-imx-lpuart.inc 
> b/xen/arch/arm/arm64/debug-imx-lpuart.inc
> new file mode 100644
> index 0000000000..f68252da86
> --- /dev/null
> +++ b/xen/arch/arm/arm64/debug-imx-lpuart.inc
> @@ -0,0 +1,52 @@
> +/*
> + * xen/arch/arm/arm64/debug-imx-lpuart.inc
> + *
> + * i.MX8QM specific debug code
> + *
> + * Peng Fan <peng.fan@xxxxxxx>
> + * Copyright 2022 NXP
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <asm/imx-lpuart.h>
> +
> +.macro early_uart_init wb wc wd
> +/* Already initialized in bootloader */
> +.endm
> +
FWICS, early_uart_init call is protected with CONFIG_EARLY_UART_INIT that is set
only for PL011 UART. So I think there is no need to implement this empty macro,
unless we want to keep the same macros across the files no matter whether in 
use or not.
I think you need to ask Julien.

Cheers,
Michal



 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.