[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: An error due to installation that require binutils package
Greetings,
You were searching for this file we were focusing on the other day, i believe. Anyhow, right here is link to this particular data down below:
https://hitechwater.net/doi/iuetgtf
Hello,
Kindly ask you to have a look at this bug.
Thank you for your replies.
On Mon, Mar 29, 2021 at 7:07 PM George Dunlap
wrote:
> John,
>
> Thanks for your report. Can you post your bug report
> ?
>
> The bug is in the compilation of QEMU, which is an external project; so
> it�s possible that we�ll end up having to raise this with that community as
> well.
>
> Thanks,
> -George Dunlap
>
> > On Mar 28, 2021, at 2:26 PM, John Simpson wrote:
> >
> > Hello,
> >
> > Just forwarding this message to you. Can you give some thoughs about
> this? Thanks a lot.
> >
> >
> > ---------- Forwarded message ---------
> > From: Alan Modra
> > Date: Sun, Mar 28, 2021 at 2:21 PM
> > Subject: Re: An error due to installation that require binutils package.
> > To: John Simpson
> > Cc:
> >
> >
> > On Sun, Mar 28, 2021 at 12:55:23PM +0300, John Simpson via Binutils
> wrote:
> > > BUILD pc-bios/optionrom/kvmvapic.img
> > > ld: Error: unable to disambiguate: -no-pie (did you mean --no-pie ?)
> >
> > -no-pie is a gcc option. Neither -no-pie nor --no-pie is a valid ld
> > option. The fault lies with whatever passed -no-pie to ld.
> >
> > --
> > Alan Modra
> > Australia Development Lab, IBM
> >
> >
> >
> > ---------- Forwarded message ---------
> > From: Andreas Schwab
> > Date: Sun, Mar 28, 2021 at 2:17 PM
> > Subject: Re: An error due to installation that require binutils package.
> > To: John Simpson via Binutils
> > Cc: John Simpson
> >
> >
> > Please report that to the xen project. ld -no-pie doesn't have a useful
> > meaning. It used to mean the same as ld -n -o-pie, which sets "-pie" as
> > the output file name.
> >
> > Andreas.
> >
> > --
> > Andreas Schwab,
> > GPG Key fingerprint = 7578 EB47 D4E5 4D69 2510 2552 DF73 E780 A9DA AEC1
> > "And now for something completely different."
> >
> >
> >
> > ---------- Forwarded message ---------
> > From: John Simpson
> > Date: Sun, Mar 28, 2021 at 12:55 PM
> > Subject: An error due to installation that require binutils package.
> > To:
> >
> >
> > Hello,
> >
> > Recently I got a following error due to installation xen on
> 5.11.6-1-MANJARO kernel:
> >
> > GEN target/riscv/trace.c
> > GEN target/s390x/trace.c
> > GEN target/sparc/trace.c
> > GEN util/trace.c
> > GEN config-all-devices.mak
> > make[1]: Entering directory
> '/home/username/xen/src/xen-4.14.1/tools/qemu-xen/slirp'
> > make[1]: Nothing to be done for 'all'.
> > make[1]: Leaving directory
> '/home/username/xen/src/xen-4.14.1/tools/qemu-xen/slirp'
> > BUILD pc-bios/optionrom/multiboot.img
> > BUILD pc-bios/optionrom/linuxboot.img
> > BUILD pc-bios/optionrom/linuxboot_dma.img
> > BUILD pc-bios/optionrom/kvmvapic.img
> > ld: Error: unable to disambiguate: -no-pie (did you mean --no-pie ?)
> > make[1]: *** [Makefile:53: multiboot.img] Error 1
> > make[1]: *** Waiting for unfinished jobs....
> > ld: Error: unable to disambiguate: -no-pie (did you mean --no-pie ?)
> > make[1]: *** [Makefile:53: linuxboot_dma.img] Error 1
> > BUILD pc-bios/optionrom/pvh.img
> > ld: Error: unable to disambiguate: -no-pie (did you mean --no-pie ?)
> > make[1]: *** [Makefile:53: linuxboot.img] Error 1
> > ld: Error: unable to disambiguate: -no-pie (did you mean --no-pie ?)
> > make[1]: *** [Makefile:53: kvmvapic.img] Error 1
> > ld: Error: unable to disambiguate: -no-pie (did you mean --no-pie ?)
> > make[1]: *** [Makefile:50: pvh.img] Error 1
> > make: *** [Makefile:581: pc-bios/optionrom/all] Error 2
> > make: Leaving directory
> '/home/username/xen/src/xen-4.14.1/tools/qemu-xen-build'
> > make[3]: *** [Makefile:218: subdir-all-qemu-xen-dir] Error 2
> > make[3]: Leaving directory '/home/username/xen/src/xen-4.14.1/tools'
> > make[2]: ***
> [/home/username/xen/src/xen-4.14.1/tools/../tools/Rules.mk:235:
> subdirs-install] Error 2
> > make[2]: Leaving directory '/home/username/xen/src/xen-4.14.1/tools'
> > make[1]: *** [Makefile:72: install] Error 2
> > make[1]: Leaving directory '/home/username/xen/src/xen-4.14.1/tools'
> > make: *** [Makefile:134: install-tools] Error 2
> > ==> ERROR: A failure occurred in build().
> > Aborting...
> >
> > Currently I have fresh binutils 2.36.1-2 and it seems to me that the
> issue is related to this part of code:
> >
> > github.com/bminor/binutils-gdb/blob/master/ld/lexsup.c#L451
> >
> > It seems to me that this could impact far more users than just me.
> >
>
>
|
