[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [ovmf test] 172314: regressions - FAIL
flight 172314 ovmf real [real] http://logs.test-lab.xenproject.org/osstest/logs/172314/ Regressions :-( Tests which did not succeed and are blocking, including tests which could not be run: build-amd64-libvirt 6 libvirt-build fail REGR. vs. 172136 build-i386-libvirt 6 libvirt-build fail REGR. vs. 172136 version targeted for testing: ovmf 1da2012d938f141821740324e2dceee1b4cfa76d baseline version: ovmf 444260d45ec2a84e8f8c192b3539a3cd5591d009 Last test of basis 172136 2022-08-04 06:43:42 Z 4 days Failing since 172151 2022-08-05 02:40:28 Z 4 days 39 attempts Testing same since 172311 2022-08-08 23:40:26 Z 0 days 2 attempts ------------------------------------------------------------ People who touched revisions under test: Czajkowski, Maciej <maciej.czajkowski@xxxxxxxxx> Edward Pickup <edward.pickup@xxxxxxx> Jose Marinho <jose.marinho@xxxxxxx> Konstantin Aladyshev <aladyshev22@xxxxxxxxx> Maciej Czajkowski <maciej.czajkowski@xxxxxxxxx> Sami Mujawar <sami.mujawar@xxxxxxx> jobs: build-amd64-xsm pass build-i386-xsm pass build-amd64 pass build-i386 pass build-amd64-libvirt fail build-i386-libvirt fail build-amd64-pvops pass build-i386-pvops pass test-amd64-amd64-xl-qemuu-ovmf-amd64 pass test-amd64-i386-xl-qemuu-ovmf-amd64 pass ------------------------------------------------------------ sg-report-flight on osstest.test-lab.xenproject.org logs: /home/logs/logs images: /home/logs/images Logs, config files, etc. are available at http://logs.test-lab.xenproject.org/osstest/logs Explanation of these reports, and of osstest in general, is at http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README.email;hb=master http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README;hb=master Test harness code can be found at http://xenbits.xen.org/gitweb?p=osstest.git;a=summary Not pushing. ------------------------------------------------------------ commit 1da2012d938f141821740324e2dceee1b4cfa76d Author: Jose Marinho <jose.marinho@xxxxxxx> Date: Tue Jul 26 17:54:42 2022 +0100 PrmPkg: Add details on AArch64 build to the Readme. Specify how to build the PrmPkg for the AArch64 architecture. Make the 2 following notes: - the PrmPkg has only been tested on AArch64 using the GCC5 toolchain. - All symbols to be listed in the PRMT as well as the PrmModuleExportDescriptor must be explicitly preserved by resorting to the --require-defined linker flag. Signed-off-by: Jose Marinho <jose.marinho@xxxxxxx> Signed-off-by: Sami Mujawar <sami.mujawar@xxxxxxx> Reviewed-by: Michael Kubacki <michael.kubacki@xxxxxxxxxxxxx> Reviewed-by: Ard Biesheuvel <ardb@xxxxxxxxxx> commit 57faeb782a505935363936ab2edce282d3afc4d5 Author: Jose Marinho <jose.marinho@xxxxxxx> Date: Fri Dec 18 14:01:55 2020 +0000 PrmPkg: Support AArch64 builds using GCC Add support to build PrmPkg for AArch64 using the GCC compiler. Add AARCH64 architecture to the list of supported architectures. Add BaseStackCheck library to allow for Prm module builds on AARCH64. Also update the CI to add dependency on ArmPkg. Signed-off-by: Jose Marinho <jose.marinho@xxxxxxx> Signed-off-by: Sami Mujawar <sami.mujawar@xxxxxxx> Reviewed-by: Michael Kubacki <michael.kubacki@xxxxxxxxxxxxx> Reviewed-by: Ard Biesheuvel <ardb@xxxxxxxxxx> commit 21200d9fe6d5b8078b93dbddfbcdf536308b67e4 Author: Jose Marinho <jose.marinho@xxxxxxx> Date: Tue Apr 5 18:57:23 2022 +0100 PrmPkg: Build Prm Samples with GCC for AARCH64 - Add the --prm flag to the GENFW_FLAGS - Add the --no-gc-section to the linker flags so that apparently unreferenced symbols are not prematurely removed from the .dll which is used to generate the Prm module .efi. - Force the linker to maintain the PrmModuleExportDescriptor symbol. - Force the linker to maintain the PRM handler funtion's symbol. Signed-off-by: Jose Marinho <jose.marinho@xxxxxxx> Signed-off-by: Sami Mujawar <sami.mujawar@xxxxxxx> Reviewed-by: Michael Kubacki <michael.kubacki@xxxxxxxxxxxxx> Reviewed-by: Ard Biesheuvel <ardb@xxxxxxxxxx> commit 9f197e44b102a8d7d457d2cb4f54967681c858a9 Author: Jose Marinho <jose.marinho@xxxxxxx> Date: Tue Apr 5 18:53:25 2022 +0100 PrmPkg: Enable external visibility on PRM symbols Enable GCC compilations to keep external symbols when generating a PRM module. Signed-off-by: Jose Marinho <jose.marinho@xxxxxxx> Signed-off-by: Sami Mujawar <sami.mujawar@xxxxxxx> Reviewed-by: Michael Kubacki <michael.kubacki@xxxxxxxxxxxxx> Reviewed-by: Ard Biesheuvel <ardb@xxxxxxxxxx> commit 1ee162281710650d444c554f9fdbbd404abd9677 Author: Jose Marinho <jose.marinho@xxxxxxx> Date: Fri Oct 29 17:48:26 2021 +0100 Basetools/GenFw: Allow AARCH64 builds to use the --prm flag The GenFw invocation with the --prm flag was previously reserved for X64. AArch64 platforms, built with GCC5, can also deploy PRM modules, hence the --prm flag is also applicable in builds targeting the AARCH64 architecture. This commit enables the --prm flag to be used for EDK2 builds targeting AARCH64. Signed-off-by: Jose Marinho <jose.marinho@xxxxxxx> Signed-off-by: Sami Mujawar <sami.mujawar@xxxxxxx> Reviewed-by: Michael Kubacki <michael.kubacki@xxxxxxxxxxxxx> Reviewed-by: Ard Biesheuvel <ardb@xxxxxxxxxx> commit cf02322c984a16fc2af252124df96564e574f3a7 Author: Konstantin Aladyshev <aladyshev22@xxxxxxxxx> Date: Wed Jul 20 22:08:12 2022 +0800 BaseTools/GenSec: Support EFI_SECTION_FREEFORM_SUBTYPE_GUID sections Signed-off-by: Konstantin Aladyshev <aladyshev22@xxxxxxxxx> Reviewed-by: Bob Feng <bob.c.feng@xxxxxxxxx> commit d241a09afbe4f472a5d7da5090dfc85046f2250f Author: Konstantin Aladyshev <aladyshev22@xxxxxxxxx> Date: Wed Jul 20 20:00:39 2022 +0800 BaseTools/VolInfo: Parse EFI_SECTION_FREEFORM_SUBTYPE_GUID header Print 'SubtypeGuid' field from the EFI_FREEFORM_SUBTYPE_GUID_SECTION structure. This value describes the raw data inside the section. Signed-off-by: Konstantin Aladyshev <aladyshev22@xxxxxxxxx> Reviewed-by: Bob Feng<bob.c.feng@xxxxxxxxx> commit f5f8c08db92d15c7a359a5eb3b0cc2545c945942 Author: Konstantin Aladyshev <aladyshev22@xxxxxxxxx> Date: Tue Jul 19 23:45:52 2022 +0800 BaseTools/VolInfo: Show FV section boundaries Currently there is no labels for start and end of the EFI_SECTION_FIRMWARE_VOLUME_IMAGE type section. Therefore it is not possible to see where the FV section ends and another section starts. Add labels for start and end of the FV sections to fix the issue. Signed-off-by: Konstantin Aladyshev <aladyshev22@xxxxxxxxx> Reviewed-by: Bob Feng <bob.c.feng@xxxxxxxxx> commit a0a03b51548e6fc7524b5aa9f8042cbabce6da1c Author: Konstantin Aladyshev <aladyshev22@xxxxxxxxx> Date: Tue Jul 19 22:27:10 2022 +0800 BaseTools/GenSec: Fix typo Fix typo in the help message. Signed-off-by: Konstantin Aladyshev <aladyshev22@xxxxxxxxx> Reviewed-by: Bob Feng <bob.c.feng@xxxxxxxxx> commit 3e599bbc105ff089b21b6024100d585a8c781328 Author: Edward Pickup <edward.pickup@xxxxxxx> Date: Thu Aug 4 10:20:50 2022 +0100 DynamicTablesPkg: Fix using RmrNodeCount unitlitialised Fix using RmrNodeCount uninitliased by initliasing it to zero. Also, add an additional check for ACPI version. This fixes a crash running on kvmtool. Signed-off-by: Edward Pickup <edward.pickup@xxxxxxx> Reviewed-by: Sami Mujawar <sami.mujawar@xxxxxxx> commit a8f59e2eb44199040d2e1f747a6d950a25ed0984 Author: Czajkowski, Maciej <maciej.czajkowski@xxxxxxxxx> Date: Tue Aug 2 01:00:09 2022 +0800 MdeModulePkg/AhciPei: Use PCI_DEVICE_PPI to manage AHCI device REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3907 This change modifies AhciPei library to allow usage both EDKII_PCI_DEVICE_PPI and EDKII_PEI_ATA_AHCI_HOST_CONTROLLER_PPI to manage ATA HDD working under AHCI mode. Cc: Hao A Wu <hao.a.wu@xxxxxxxxx> Cc: Ray Ni <ray.ni@xxxxxxxxx> Cc: Liming Gao <gaoliming@xxxxxxxxxxxxxx> Signed-off-by: Maciej Czajkowski <maciej.czajkowski@xxxxxxxxx> Reviewed-by: Hao A Wu <hao.a.wu@xxxxxxxxx> commit 86757f0b4750f672f346d955f89e5b76430ba6b4 Author: Czajkowski, Maciej <maciej.czajkowski@xxxxxxxxx> Date: Tue Aug 2 01:00:08 2022 +0800 MdeModulePkg: Add EDKII_PCI_DEVICE_PPI definition REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3907 This commit introduces EDKII_PCI_DEVICE_PPI. The purpose of this PPI is to provide a way of accessing PCI devices to drvice drivers such as NvmExpressPei or AhciPei. Cc: Hao A Wu <hao.a.wu@xxxxxxxxx> Cc: Ray Ni <ray.ni@xxxxxxxxx> Cc: Liming Gao <gaoliming@xxxxxxxxxxxxxx> Signed-off-by: Maciej Czajkowski <maciej.czajkowski@xxxxxxxxx> Reviewed-by: Hao A Wu <hao.a.wu@xxxxxxxxx>
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |