[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [XEN v4 11/11] xen/Arm: GICv3: Enable GICv3 for AArch32
One can now use GICv3 on AArch32 systems. However, ITS is not supported. The reason being currently we are trying to validate GICv3 on an AArch32_v8R system. Refer ARM DDI 0568A.c ID110520, B1.3.1, "A Generic Interrupt Controller (GIC) implemented with an Armv8-R PE must not implement LPI support." By default GICv3 is disabled on AArch32 and enabled on AArch64. Updated SUPPORT.md to state that GICv3 on Arm32 is not security supported. Signed-off-by: Ayan Kumar Halder <ayan.kumar.halder@xxxxxxx> --- Changed from :- v1 - 1. Remove "ARM_64 || ARM_32" as it is always true. 2. Updated SUPPORT.md. v2 - 1. GICv3 is enabled by default only on ARM_64. 2. Updated SUPPORT.md. v3 - 1. GICv3 is not selected by ARM_64. Rather, it is optionally enabled. 2. GICv3 is disabled by default on ARM_32. SUPPORT.md | 7 +++++++ xen/arch/arm/Kconfig | 9 +++++---- xen/arch/arm/include/asm/cpufeature.h | 1 + 3 files changed, 13 insertions(+), 4 deletions(-) diff --git a/SUPPORT.md b/SUPPORT.md index ab71464cf6..295369998e 100644 --- a/SUPPORT.md +++ b/SUPPORT.md @@ -76,6 +76,13 @@ For the Cortex A57 r0p0 - r1p1, see Errata 832075. Status, ARM SMMUv3: Tech Preview Status, Renesas IPMMU-VMSA: Supported, not security supported +### ARM/GICv3 + +GICv3 is an interrupt controller specification designed by Arm. + + Status, Arm64: Security supported + Status, Arm32: Supported, not security supported + ### ARM/GICv3 ITS Extension to the GICv3 interrupt controller to support MSI. diff --git a/xen/arch/arm/Kconfig b/xen/arch/arm/Kconfig index 52a05f704d..9d0c45f892 100644 --- a/xen/arch/arm/Kconfig +++ b/xen/arch/arm/Kconfig @@ -41,16 +41,17 @@ config ARM_EFI config GICV3 bool "GICv3 driver" - depends on ARM_64 && !NEW_VGIC - default y + depends on !NEW_VGIC + default n if ARM_32 + default y if ARM_64 ---help--- Driver for the ARM Generic Interrupt Controller v3. - If unsure, say Y + If unsure, say N for ARM_32 and Y for ARM_64 config HAS_ITS bool "GICv3 ITS MSI controller support (UNSUPPORTED)" if UNSUPPORTED - depends on GICV3 && !NEW_VGIC + depends on GICV3 && !NEW_VGIC && !ARM_32 config HVM def_bool y diff --git a/xen/arch/arm/include/asm/cpufeature.h b/xen/arch/arm/include/asm/cpufeature.h index c86a2e7f29..c62cf6293f 100644 --- a/xen/arch/arm/include/asm/cpufeature.h +++ b/xen/arch/arm/include/asm/cpufeature.h @@ -33,6 +33,7 @@ #define cpu_has_aarch32 (cpu_has_arm || cpu_has_thumb) #ifdef CONFIG_ARM_32 +#define cpu_has_gicv3 (boot_cpu_feature32(gic) >= 1) #define cpu_has_gentimer (boot_cpu_feature32(gentimer) == 1) /* * On Armv7, the value 0 is used to indicate that PMUv2 is not -- 2.17.1
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |