[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH v2 04/40] xen/arm: add an option to define Xen start address for Armv8-R



From: Wei Chen <wei.chen@xxxxxxx>

On Armv8-A, Xen has a fixed virtual start address (link address
too) for all Armv8-A platforms. In an MMU based system, Xen can
map its loaded address to this virtual start address. So, on
Armv8-A platforms, the Xen start address does not need to be
configurable. But on Armv8-R platforms, there is no MMU to map
loaded address to a fixed virtual address and different platforms
will have very different address space layout. So Xen cannot use
a fixed physical address on MPU based system and need to have it
configurable.

In this patch we introduce one Kconfig option for users to define
the default Xen start address for Armv8-R. Users can enter the
address in config time, or select the tailored platform config
file from arch/arm/configs.

And as we introduced Armv8-R platforms to Xen, that means the
existed Arm64 platforms should not be listed in Armv8-R platform
list, so we add !ARM_V8R dependency for these platforms.

Signed-off-by: Wei Chen <wei.chen@xxxxxxx>
Signed-off-by: Jiamei.Xie <jiamei.xie@xxxxxxx>
---
v1 -> v2:
1. Remove the platform header fvp_baser.h.
2. Remove the default start address for fvp_baser64.
3. Remove the description of default address from commit log.
4. Change HAS_MPU to ARM_V8R for Xen start address dependency.
   No matter Arm-v8r board has MPU or not, it always need to
   specify the start address.
---
 xen/arch/arm/Kconfig           |  8 ++++++++
 xen/arch/arm/platforms/Kconfig | 16 +++++++++++++---
 2 files changed, 21 insertions(+), 3 deletions(-)

diff --git a/xen/arch/arm/Kconfig b/xen/arch/arm/Kconfig
index ace7178c9a..c6b6b612d1 100644
--- a/xen/arch/arm/Kconfig
+++ b/xen/arch/arm/Kconfig
@@ -145,6 +145,14 @@ config TEE
          This option enables generic TEE mediators support. It allows guests
          to access real TEE via one of TEE mediators implemented in XEN.
 
+config XEN_START_ADDRESS
+       hex "Xen start address: keep default to use platform defined address"
+       default 0
+       depends on ARM_V8R
+       help
+         This option allows to set the customized address at which Xen will be
+         linked on MPU systems. This address must be aligned to a page size.
+
 source "arch/arm/tee/Kconfig"
 
 config STATIC_SHM
diff --git a/xen/arch/arm/platforms/Kconfig b/xen/arch/arm/platforms/Kconfig
index c93a6b2756..0904793a0b 100644
--- a/xen/arch/arm/platforms/Kconfig
+++ b/xen/arch/arm/platforms/Kconfig
@@ -1,6 +1,7 @@
 choice
        prompt "Platform Support"
        default ALL_PLAT
+       default FVP_BASER if ARM_V8R
        ---help---
        Choose which hardware platform to enable in Xen.
 
@@ -8,13 +9,14 @@ choice
 
 config ALL_PLAT
        bool "All Platforms"
+       depends on !ARM_V8R
        ---help---
        Enable support for all available hardware platforms. It doesn't
        automatically select any of the related drivers.
 
 config QEMU
        bool "QEMU aarch virt machine support"
-       depends on ARM_64
+       depends on ARM_64 && !ARM_V8R
        select GICV3
        select HAS_PL011
        ---help---
@@ -23,7 +25,7 @@ config QEMU
 
 config RCAR3
        bool "Renesas RCar3 support"
-       depends on ARM_64
+       depends on ARM_64 && !ARM_V8R
        select HAS_SCIF
        select IPMMU_VMSA
        ---help---
@@ -31,14 +33,22 @@ config RCAR3
 
 config MPSOC
        bool "Xilinx Ultrascale+ MPSoC support"
-       depends on ARM_64
+       depends on ARM_64 && !ARM_V8R
        select HAS_CADENCE_UART
        select ARM_SMMU
        ---help---
        Enable all the required drivers for Xilinx Ultrascale+ MPSoC
 
+config FVP_BASER
+       bool "Fixed Virtual Platform BaseR support"
+       depends on ARM_V8R
+       help
+         Enable platform specific configurations for Fixed Virtual
+         Platform BaseR
+
 config NO_PLAT
        bool "No Platforms"
+       depends on !ARM_V8R
        ---help---
        Do not enable specific support for any platform.
 
-- 
2.25.1




 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.