[XEN v2 02/11] xen/arm: Use the correct format specifier

[Ayan Kumar Halder <ayan.kumar.halder@xxxxxxx>]

1. One should use 'PRIpaddr' to display 'paddr_t' variables.
2. One should use 'PRIx64' to display 'u64' in hex format. The current
use of 'PRIpaddr' for printing PTE is buggy as this is not a physical
address.

Signed-off-by: Ayan Kumar Halder <ayan.kumar.halder@xxxxxxx>
---

Changes from -

v1 - 1. Moved the patch earlier.
2. Moved a part of change from "[XEN v1 8/9] xen/arm: Other adaptations 
required to support 32bit paddr"
into this patch.

 xen/arch/arm/domain_build.c | 10 +++++-----
 xen/arch/arm/gic-v2.c       |  6 +++---
 xen/arch/arm/mm.c           |  2 +-
 3 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/xen/arch/arm/domain_build.c b/xen/arch/arm/domain_build.c
index 829cea8de8..33a5945a2d 100644
--- a/xen/arch/arm/domain_build.c
+++ b/xen/arch/arm/domain_build.c
@@ -1315,7 +1315,7 @@ static int __init make_memory_node(const struct domain *d,
     dt_dprintk("Create memory node\n");
 
     /* ePAPR 3.4 */
-    snprintf(buf, sizeof(buf), "memory@%"PRIx64, mem->bank[i].start);
+    snprintf(buf, sizeof(buf), "memory@%"PRIpaddr, mem->bank[i].start);
     res = fdt_begin_node(fdt, buf);
     if ( res )
         return res;
@@ -1383,7 +1383,7 @@ static int __init make_shm_memory_node(const struct 
domain *d,
         __be32 *cells;
         unsigned int len = (addrcells + sizecells) * sizeof(__be32);
 
-        snprintf(buf, sizeof(buf), "xen-shmem@%"PRIx64, mem->bank[i].start);
+        snprintf(buf, sizeof(buf), "xen-shmem@%"PRIpaddr, mem->bank[i].start);
         res = fdt_begin_node(fdt, buf);
         if ( res )
             return res;
@@ -2719,7 +2719,7 @@ static int __init make_gicv2_domU_node(struct kernel_info 
*kinfo)
     /* Placeholder for interrupt-controller@ + a 64-bit number + \0 */
     char buf[38];
 
-    snprintf(buf, sizeof(buf), "interrupt-controller@%"PRIx64,
+    snprintf(buf, sizeof(buf), "interrupt-controller@%"PRIpaddr,
              vgic_dist_base(&d->arch.vgic));
     res = fdt_begin_node(fdt, buf);
     if ( res )
@@ -2775,7 +2775,7 @@ static int __init make_gicv3_domU_node(struct kernel_info 
*kinfo)
     char buf[38];
     unsigned int i, len = 0;
 
-    snprintf(buf, sizeof(buf), "interrupt-controller@%"PRIx64,
+    snprintf(buf, sizeof(buf), "interrupt-controller@%"PRIpaddr,
              vgic_dist_base(&d->arch.vgic));
 
     res = fdt_begin_node(fdt, buf);
@@ -2861,7 +2861,7 @@ static int __init make_vpl011_uart_node(struct 
kernel_info *kinfo)
     /* Placeholder for sbsa-uart@ + a 64-bit number + \0 */
     char buf[27];
 
-    snprintf(buf, sizeof(buf), "sbsa-uart@%"PRIx64, d->arch.vpl011.base_addr);
+    snprintf(buf, sizeof(buf), "sbsa-uart@%"PRIpaddr, 
d->arch.vpl011.base_addr);
     res = fdt_begin_node(fdt, buf);
     if ( res )
         return res;
diff --git a/xen/arch/arm/gic-v2.c b/xen/arch/arm/gic-v2.c
index 61802839cb..5d4d298b86 100644
--- a/xen/arch/arm/gic-v2.c
+++ b/xen/arch/arm/gic-v2.c
@@ -1049,7 +1049,7 @@ static void __init gicv2_dt_init(void)
     if ( csize < SZ_8K )
     {
         printk(XENLOG_WARNING "GICv2: WARNING: "
-               "The GICC size is too small: %#"PRIx64" expected %#x\n",
+               "The GICC size is too small: %#"PRIpaddr" expected %#x\n",
                csize, SZ_8K);
         if ( platform_has_quirk(PLATFORM_QUIRK_GIC_64K_STRIDE) )
         {
@@ -1280,11 +1280,11 @@ static int __init gicv2_init(void)
         gicv2.map_cbase += aliased_offset;
 
         printk(XENLOG_WARNING
-               "GICv2: Adjusting CPU interface base to %#"PRIx64"\n",
+               "GICv2: Adjusting CPU interface base to %#"PRIpaddr"\n",
                cbase + aliased_offset);
     } else if ( csize == SZ_128K )
         printk(XENLOG_WARNING
-               "GICv2: GICC size=%#"PRIx64" but not aliased\n",
+               "GICv2: GICC size=%#"PRIpaddr" but not aliased\n",
                csize);
 
     gicv2.map_hbase = ioremap_nocache(hbase, PAGE_SIZE);
diff --git a/xen/arch/arm/mm.c b/xen/arch/arm/mm.c
index 0fc6f2992d..fab54618ab 100644
--- a/xen/arch/arm/mm.c
+++ b/xen/arch/arm/mm.c
@@ -249,7 +249,7 @@ void dump_pt_walk(paddr_t ttbr, paddr_t addr,
 
         pte = mapping[offsets[level]];
 
-        printk("%s[0x%03x] = 0x%"PRIpaddr"\n",
+        printk("%s[0x%03x] = 0x%"PRIx64"\n",
                level_strs[level], offsets[level], pte.bits);
 
         if ( level == 3 || !pte.walk.valid || !pte.walk.table )
-- 
2.17.1